The accel_3d sensor already has a timestamp channel, this patch just
replicate that for gravity sensor.

Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210105093515.19135-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

kxcjk1013 devices have VDD and VDDIO power lines. Need
to make sure the regulators are enabled before any
communication with kxcjk1013. This patch introduces
vdd/vddio regulators for kxcjk1013.

Signed-off-by: Devajith V S <devajithvs@gmail.com>
Link: https://lore.kernel.org/r/20201213172437.2779-2-devajithvs@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

bmc150 accelerometers with an ACPI hardware-id of BOSC0200 have an ACPI
method providing their mount-matrix, add support for retrieving this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-3-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Some BOSC0200 acpi_device-s describe two accelerometers in a single ACPI
device. Normally we would handle this by letting the special
drivers/platform/x86/i2c-multi-instantiate.c driver handle the BOSC0200
ACPI id and let it instantiate 2 bmc150_accel type i2c_client-s for us.

But doing so changes the modalias for the first accelerometer
(which is already supported and used on many devices) from
acpi:BOSC0200 to i2c:bmc150_accel. The modalias is not only used
to load the driver, but is also used by hwdb matches in
/lib/udev/hwdb.d/60-sensor.hwdb which provide a mountmatrix to
userspace by setting the ACCEL_MOUNT_MATRIX udev property.

Switching the handling of the BOSC0200 over to i2c-multi-instantiate.c
will break the hwdb matches causing the ACCEL_MOUNT_MATRIX udev prop
to no longer be set. So switching over to i2c-multi-instantiate.c is
not an option.

Changes by Hans de Goede:
-Add explanation to the commit message why i2c-multi-instantiate.c
 cannot be used
-Also set the dev_name, fwnode and irq i2c_board_info struct members
 for the 2nd client

Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-2-hdegoede@redhat.com
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198671
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The bmc150_accel_dat struct irq member is only ever used inside
bmc150_accel_core_probe, drop it and just use the function argument
directly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this.   Also we don't do anything with
the value returned so stop it returning anything.  For the few drivers
that didn't already print an error message in this patch, add such
a print.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org

These Bosch accelerometers have two supplies, VDD and VDDIO.
Add some rudimentary support to obtain and enable these
regulators during probe() and disable them during remove()
or on the errorpath.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201115205745.618455-3-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This adds support for the BMA222 version of this sensor,
found in for example the Samsung GT-I9070 mobile phone.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201115205745.618455-2-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...

There is no matching spi_get_drvdata() in the driver. This looks like a
left-over from before the driver was converted to device-managed functions.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201119141806.84827-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>