linux-toradex.git/drivers/iio/dac/Makefile, branch v4.2.2

iio: add m62332 DAC driver

2015-05-17T08:37:45+00:00

m62332 is a simple 2-channel DAC used on several Sharp Zaurus boards to
control LCD voltage, backlight and sound. The driver use regulators to
control the reference voltage and enabling/disabling the DAC.

Signed-off-by: Dmitry Eremin-Solenikov 
Signed-off-by: Jonathan Cameron

iio: add support of the max5821

2014-07-27T13:21:35+00:00

Signed-off-by: Philippe Reynes 
Signed-off-by: Jonathan Cameron

iio: dac: mcp4902/mcp4912/mcp4922 dac driver

2014-06-21T10:50:33+00:00

This patch provides an iio device driver for the Microchip
MCP49x2 series DACs.

Signed-off-by: Michael Welling 
Signed-off-by: Jonathan Cameron

iio: Add a comment to about alphabetical order to Kconfigs and Makefiles

2013-08-03T17:40:36+00:00

Keeping Makefile and Kconfig entries in alphabetical order usually works better
than just appending new entries at the end, since it reduces the amount of
conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to
document that the entries should be kept in alphabetical order.

Also reorder those  entries which weren't in alphabetical order yet.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

iio:dac: Add support for the AD7303

2013-06-11T19:25:58+00:00

This patch adds support for the AD7303. The AD7303 is a simple 2 channel 8 bit
DAC with an SPI interface.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

iio:dac: Add support for the ad5449

2012-10-19T17:46:51+00:00

This patch adds support for the AD5415, AD5426, AD5429, AD5432, AD5439, AD5443
and AD5449 single and dual channel DACs.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

iio:dac: Add ad5755 driver

2012-09-17T19:55:54+00:00

This patch adds support for the AD5755, AD5755-1, AD5757, AD5735, AD5737 16 and
14 bit quad-channel DACs. The AD5757/AD5737 only have current outputs, but
for the AD5755/AD5757 each of the outputs can be configured to either be a
voltage or a current output. We only allow to configure this at device probe
time since usually this needs to match the external circuitry and should not be
changed on the fly.

A few trivial formatting changes on merge.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

iio: add mcp4725 I2C DAC driver

2012-06-12T21:50:51+00:00

v5:
* fix warnings (Jonathan Cameron)

v4:
* remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron)
* use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron)
* #include mcp4725.h from linux/iio/dac/

v3:
* move from staging to drivers/iio
* switch to chan_spec
* dev_get_drvdata() -> dev_to_iio_dev()
* annotate probe() and remove() with __devinit and __devexit

v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen):
* did NOT switch to chan_spec yet
* rebase to staging-next tree, update iio header locations
* dropped dac.h #include, not needed
* strict_strtol() -> kstrtol()
* call iio_device_unregister() in remove()
* everything in one patch

Signed-off-by: Peter Meerwald 
Acked-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

staging:iio: Move DAC drivers out of staging

2012-06-05T05:02:25+00:00

The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.

So lets move the whole folder out of staging.

Signed-off-by: Lars-Peter Clausen 
Acked-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman