We need the IIO/Staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The AD5766/AD5767 are 16-channel, 16-bit/12-bit, voltage output dense DACs
Digital-to-Analog converters.

This change adds support for these DACs.

Signed-off-by: Cristian Pop <cristian.pop@analog.com>
Link: https://lore.kernel.org/r/20210115112105.58652-3-cristian.pop@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The power-down mask of the ad5504 is actually a power-up mask. Meaning if
a bit is set the corresponding channel is powered up and if it is not set
the channel is powered down.

The driver currently has this the wrong way around, resulting in the
channel being powered up when requested to be powered down and vice versa.

Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The information in the ad7303 platform_data header is unused, so it's dead
code.
This change removes it and it's inclusion from the driver.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001141004.53846-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add of_match_table to this driver, so devices can be probed based on
device tree contents.

Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Link: https://lore.kernel.org/r/20200924195215.49443-2-michael.auchter@ni.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The AD5338R is a 10-bit DAC with 2 outputs and an internal 2.5V
reference (enabled by default). The register configuration is nearly
identical to the AD5696R DAC that's already supported by this driver,
with the channel selection bits being the only thing different.

Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Link: https://lore.kernel.org/r/20200924195215.49443-1-michael.auchter@ni.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Jonathan writes:

Second set of features and cleanups for IIO in 5.10

We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.

There are a few late breaking fixes in here that can wait for the
merge window.

dt yaml conversions
-------------------

* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc

Features
--------

* adxrs290
  - Add triggered buffer support and expose data ready signal as a possible
    trigger. Includes updating bindings.
  - Add debugfs hooks for register access.
* mlx90632
  - Add a clear user interface to override the measured ambient temperature.
* vl53l0x
  - Add IRQ support including dt bindings.

Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
  * adf4350
  * exynos-adc
  * fls-imx25-gcq
  * stm32-dac

devm use to simplify probe error handling and remove functions.
  * adis16201
  * adis16203
  * adis16209
  * adis16240
  * adis16136
  * adis16260
  * adis16400
  * adis16460
  * adis16480
  * adis library - drop unused adis_setup_buffer_and_trigger()

of_match_ptr removal and incorrect ACPI binding removal
  of_match_ptr() rarely makes sense in an IIO driver as space saving
  is trivial and it breaks ACPI PRP0001 based instantiation.
  Mostly this series is about removing examples that get copied into new
  drivers.
  * ad2s1200
  * ad5272
  * ad5446
  * ad5592r
  * ad5593r
  * ad5703
  * ak8974
  * ak8975
  * ams-iaq-core
  * as3935
  * atlas-sensor
  * ds1803
  * hdc100x
  * htu21
  * icp10100
  * lmp91000
  * pulsedlight
  * max30102
  * max5432
  * max5481
  * mcp4018
  * mcp4131
  * mcp4531
  * mcp4725
  * ms5611
  * ms5637
  * si7020
  * sgp30
  * ti-dac082s085
  * ti-dac5571
  * tmp007
  * tsys01
  * vz89x
  * zpa2326

kernel-doc fixes
  * iio-core
  * ad7303
  * ad7947
  * adis16080
  * adis16400
  * iio_dummy_evgen
  * sgp30

Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort.  There are a few more drivers to come.
  * inv_mpu6050
  * itg3200
  * si1145
  * st_lsm6dsx
  * ti-adc0832
  * ti-adc12138

(not driver focused)
* MAINTAINERS
  - Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
  - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
    active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)

(individual drivers)
* ad5592r
  - Fix use of true for IIO_SHARED_BY_TYPE
  - Tidy up locking and indentation.
* ad9467
  - Improve error message on chip-id missmatch.
  - Use more appropriate error value if chip-id not recognised.
* adis-library
  - Simplify burst mode handling.
* adxrs290
  - Make sure to switch device to standby mode during remove.
* as73211
  - Increase measurement timeout as seems some devices are slower.
* bma180
  - Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
  - Update binding to require second interrut with touch screen.
  - Update binding to not require syscon on S5Pv210
* hmc5843
  - Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
  - Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
  - Use module_platform_driver() to remove boilerplate.
* meson-saradc
  - style consistency fixes
* rockchip_saradc
  - Allow compile testing with !ARM.
* st_lsm6dsx
  - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
  - Fix an issue with unchecked return value.
* stm32-adc
  - Fix a missing return introduced in dev_err_probe() patch earlier in
    cycle.
* sx9310
  - Prefer async mode for probe as paticularly slow startup.
* vcnl4000
  - Add missing interrupt property to dt binding.

* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings: iio: vishay,vcnl4000: add interrupts property
  iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
  iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
  iio:adc:ti-adc12138 Fix alignment issue with timestamp
  iio:adc:ti-adc0832 Fix alignment issue with timestamp
  iio:imu:st_lsm6dsx Fix alignment and data leak issues
  iio:light:si1145: Fix timestamp alignment and prevent data leak.
  iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
  iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
  iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
  dt-bindings:iio:adc:holt,hi8435 yaml conversion
  dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
  dt-bindings:iio:adc:adi,ad7949 yaml conversion
  dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
  dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
  dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
  dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
  dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
  dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
  dt-bindings:iio:adc:ti,ads1015 yaml conversion
  ...

Since there was a recently discovered issue with these locks, it probably
makes sense to cleanup the code a bit, to prevent it from being used as an
example/reference.

This change moves the lock only where it is explicitly needed to protect
resources from potential concurrent accesses.

It also reworks the switch statements to do direct returns vs caching the
return value on a variable.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200706110259.23947-3-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The next rework may require an unindentation of a code block in
ad5592r_read_raw(), which would make review a bit more difficult.

This change unindents the code block for reading the scale of the
non-temperature channels.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200706110259.23947-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

struct iio_chan_spec_ext_info shared element is of type
enum iio_shared_by, not boolean.   It's like the enum value
will for IIO_SHARED_BY_TYPE == 1 == true, hence no actual
problem has been observed.

  CC [M]  drivers/iio/dac/ad5592r-base.o
  491 |   .shared = true,
      |

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200722142515.897378-1-jic23@kernel.org