linux-toradex.git/drivers/iio/imu/Makefile, branch v4.12

iio: imu: add support to lsm6dsx driver

2017-01-14T12:40:37+00:00

Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor

http://www.st.com/resource/en/datasheet/lsm6ds3.pdf
http://www.st.com/resource/en/datasheet/lsm6dsm.pdf

- continuous mode support
- i2c support
- spi support
- sw fifo mode support
- supported devices: lsm6ds3, lsm6dsm

Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Jonathan Cameron

iio: imu: Add initial support for Bosch BMI160

2016-04-16T12:39:21+00:00

BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration
and angular rate measurement. It also offers a secondary I2C interface
for connecting a magnetometer sensor (usually BMM160).

Current driver offers support for accelerometer and gyroscope readings
via sysfs or via buffer interface using an external trigger (e.g.
hrtimer). Data is retrieved from IMU via I2C or SPI interface.

Datasheet is at:
	http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf

Signed-off-by: Daniel Baluta 
Signed-off-by: Jonathan Cameron

iio: imu: Add support for Kionix KMX61 sensor

2014-12-12T13:43:54+00:00

Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports
raw accel/magn readings together with scale and sampling frequency.

This driver uses two IIO devices one for accelerometer and one for magnetometer.

Datasheet will be available at:
http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61

Signed-off-by: Daniel Baluta 
Signed-off-by: Jonathan Cameron

Revert "iio: imu: Add support for Kionix KMX61 sensor"

2014-12-12T13:30:04+00:00

The two halves of this part can run largely independently.  Hence
a version 4 of this patch followed that reorganized things completely.

This reverts commit d7d787d29148cde12958c2e3765ad3a55dc55eaf.

iio: imu: Add support for Kionix KMX61 sensor

2014-11-22T10:47:20+00:00

Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports
raw accel/magn readings together with scale and sampling frequency.

Datasheet will be available at:
http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61

Signed-off-by: Daniel Baluta 
Signed-off-by: Jonathan Cameron

iio: Add a comment to about alphabetical order to Kconfigs and Makefiles

2013-08-03T17:40:36+00:00

Keeping Makefile and Kconfig entries in alphabetical order usually works better
than just appending new entries at the end, since it reduces the amount of
conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to
document that the entries should be kept in alphabetical order.

Also reorder those  entries which weren't in alphabetical order yet.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

Invensense MPU6050 Device Driver.

2013-02-10T17:42:43+00:00

This the basic functional Invensense MPU6050 Device driver.

Signed-off-by: Ge Gao 
Reviewed-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

staging:iio: Move adis16400 out of staging

2013-01-26T10:07:50+00:00

This adis16400 driver is in pretty good shape now, so move it out of staging.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

iio:imu: Add support for the ADIS16480 and similar IMUs

2012-11-20T21:28:51+00:00

This patch adds support for the ADIS16375, ADIS16480, ADIS16485, ADIS16488 6
degree to 10 degree of freedom IMUs.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron

staging:iio: Move adis library out of staging

2012-11-19T22:22:12+00:00

Now that the adis library no longer depends on the sw_ring buffer implementation
we can move it out of staging.

While we are at it also sort the entries in the iio Kconfig and Makefile to be
in alphabetical order.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron