linux-toradex.git/drivers/iio/light, branch v3.6.1

iio: lm3533-als: Fix build warnings

2012-08-16T19:24:38+00:00

Fix below build warnings:
  CC [M]  drivers/iio/light/lm3533-als.o
drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.show') [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default]
drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.store') [enabled by default]

Signed-off-by: Axel Lin

iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode()

2012-08-16T19:24:33+00:00

Do not leak memory by updating pointer with potentially NULL realloc return value.
There is no need to preserve data in the buffer,
so replace krealloc() by kfree()-kmalloc() pair.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Acked-by: Peter Meerwald 
Signed-off-by: Jonathan Cameron

iio: fix pointer cast warning

2012-07-15T16:33:17+00:00

fix compile warning reported by Fengguang Wu:

drivers/iio/light/adjd_s311.c: In function 'adjd_s311_trigger_handler':
drivers/iio/light/adjd_s311.c:188:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/iio/light/adjd_s311.c:188:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

   185              }
   186
   187              if (indio_dev->scan_timestamp)
 > 188                      *(s64 *)((phys_addr_t)data->buffer + ALIGN(len, sizeof(s64)))
   189                              = time_ns;
   190              iio_push_to_buffer(buffer, (u8 *)data->buffer, time_ns);
   191

Signed-off-by: Peter Meerwald 
Reported-by: Fengguang Wu 
Signed-off-by: Jonathan Cameron

iio: add adjd_s311 I2C digital color sensor driver

2012-07-12T16:45:34+00:00

sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity
and gain is controlled in the driver by ext_info integration_time
and CHAN_INFO_HARDWAREGAIN

driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the
sensor data

v5: address comments by Jonathan Cameron
* use macro for channel declaration
* get timestamp right before measurement
* cleanups

v4: address comments by Lars-Peter Clausen
* make sure trigger handler is exited with iio_trigger_notify_done()
  and IRQ_HANDLED
* kfree()/kalloc() -> krealloc()

v3:
* fix warnings

v2: address comments by Lars-Peter Clausen
* buffer allocation now in update_scan_mode instead of in trigger
  handler
* simplify trigger code (assume active_scan_mask is not empty, use
  for_each_set_bit, use iio_push_to_buffer)
* reorder entry in Makefile and Kconfig
* fix remove

Signed-off-by: Peter Meerwald 
Signed-off-by: Jonathan Cameron

iio: add vcnl4000 combined ALS and proximity sensor

2012-06-20T23:12:46+00:00

minimal driver, no IR current control and proximity/event
handling yet

v5:
* checkpatch warnings
* increase msleep() to 20 ms when waiting for data ready as
  measurement/conversion can take up to 100 ms, 1 ms is too short

v4 (address comments by Jonathan Cameron)
* remove SENSORS_ prefix in Kconfig
* change from IIO_INTENSITY to IIO_LIGHT
* move from staging

v3 (address comments by Shubhrajyoti Datta)
* cleanup Kconfig entry
* call I2C read/write functions directly

v2 (address comments by Lars-Peter Clausen and Jonathan Cameron)
* unify code for reading PS and AL data into
  parameterized _measure() function
* limit wait for data to become ready within 20 tries
* drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY
* drop extra string arguments used for logging purpose only

Signed-off-by: Peter Meerwald 
Acked-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: add LM3533 ambient-light-sensor driver

2012-06-05T04:12:29+00:00

Add sub-driver for the ambient-light-sensor interface on National
Semiconductor / TI LM3533 lighting power chips.

The sensor interface can be used to control the LEDs and backlights of
the chip through defining five light zones and three sets of
corresponding output-current values.

The driver provides raw and mean adc readings along with the current
light zone through sysfs. A threshold event can be generated on zone
changes. The ALS-control output values can be set per zone for the three
current output channels.

Signed-off-by: Johan Hovold 
Acked-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman