linux-toradex.git/drivers/iio/light, branch v4.15 Linux kernel for Apalis and Colibri modules Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging 2017-11-14T04:53:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-14T04:53:28+00:00 449fcf3ab0baf3dde9952385e6789f2ca10c3980 Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ... 
Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...
License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: light: vl6180: Correct ALS scale for non-default gain/integration time 2017-10-09T19:50:21+00:00 Stefan Brüns stefan.bruens@rwth-aachen.de 2017-09-24T21:59:20+00:00 3525d7cfb740243f0d9fab19288b2f89f715aba5 The reported scale was only correct for the default settings of 100 ms integration time and gain 1. This aligns the reported scale with the behaviour of any other IIO driver and the documented ABI, but may require userspace changes if someone uses non-default settings. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The reported scale was only correct for the default settings of 100 ms
integration time and gain 1.

This aligns the reported scale with the behaviour of any other IIO driver
and the documented ABI, but may require userspace changes if someone uses
non-default settings.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: light: vl6180: Cleanup als_gain lookup, avoid register readback 2017-10-09T19:50:15+00:00 Stefan Brüns stefan.bruens@rwth-aachen.de 2017-09-24T21:59:19+00:00 e794bf6751a0376a459ae1659a1646652b198cad Instead of manually iterating the array of allowed gain values, use find_closest. Storing the current gain setting avoids accessing the hardware on each query. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Instead of manually iterating the array of allowed gain values, use
find_closest. Storing the current gain setting avoids accessing the
hardware on each query.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: light: vl6180: Avoid readback of integration time register 2017-10-09T19:50:10+00:00 Stefan Brüns stefan.bruens@rwth-aachen.de 2017-09-24T21:59:18+00:00 df698c0402eaa2c949344c45f42a7d85e9506533 Instead of reading the value from the register on each query, store the set value. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Instead of reading the value from the register on each query, store the
set value.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: light: vl6180: Move range check to integration time setter, cleanup 2017-10-09T19:50:08+00:00 Stefan Brüns stefan.bruens@rwth-aachen.de 2017-09-24T21:59:17+00:00 1e2ed3d0d27d80aa312b7b0081c0da56e04baeb9 This improves code uniformity (range checks for als_gain are also done in the setter). Also unmangle rounding and calculation of register value. The calculated integration time it_ms is required in the next patch of the series. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
This improves code uniformity (range checks for als_gain are also done
in the setter). Also unmangle rounding and calculation of register value.

The calculated integration time it_ms is required in the next patch of
the series.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: light: tcs3472: support out-of-threshold events 2017-09-03T17:10:29+00:00 Akinobu Mita akinobu.mita@gmail.com 2017-06-26T15:44:55+00:00 9d2f715d592eb4d0e643f6219f4a160fbd62934d The TCS3472 device provides interrupt signal for out-of-threshold events with persistence filter. This change adds interrupt support for the threshold events and enables to configure the period of time by persistence filter. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The TCS3472 device provides interrupt signal for out-of-threshold events
with persistence filter.

This change adds interrupt support for the threshold events and enables
to configure the period of time by persistence filter.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio:light: drop assign iio_info.driver_module and iio_trigger_ops.owner 2017-08-22T20:31:57+00:00 Jonathan Cameron jic23@kernel.org 2017-07-23T16:26:00+00:00 4166b47c2b4ae38496a6871b3560677705f8edea The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> 
The equivalent of both of these are now done via macro magic when
the relevant register calls are made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next 2017-08-20T17:42:42+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-08-20T17:42:42+00:00 5e47adb90630c6c1b84623d85751618f704fb89d Jonathan writes: Second set of IIO new device support, features and cleanup for the 4.14 cycle. New device support: * ak8974 - support the AMI306. * st_magnetometer - add support for the LIS2MDL with bindings. * rockchip-saradc - add binding for rv1108 SoC (no driver change). * srf08 - add srf02 (i2c only) and srf10 support. * stm32-timer - support for the STM32H7 to existing driver. Features: * tools - move over to the tools buildsystem rather than hand rolling. - add an install section to the build. * ak8974 - use serial number to add device randomness. - add AMI306 calibration data output. * ccs811 - triggered buffer support. * srf08 - add a device tree table as the old style i2c probing is going away, - add triggered buffer support * st32-adc - add optional st,min-sample-time-nsecs binding to allow control of sampling against analog circuitry. * stm32-timer - add output compare triggers. * ti-ads1015 - add threshold event support. * ti-ads7950 - Allow use on ACPI platforms including providing a default reference voltage as there is no way to obtain this on ACPI currently. Cleanup and fixes: * ad7606 - fix an error return code in probe. * ads1015 - fix incorrect data rate setting update when capture in progress, - fix wrong scale information for the ADS1115, - make conversions work when CONFIG_PM is not set, - make sure we don't get a stale result after a runtime resume by ensuring we wait long enough, - avoid returning a false error form the buffer setup callbacks, - add enough wait time to get the correct conversion, - remove an unnecessary config register update, - add a helper to set conversion mode reducing repeated boilerplate, - use devm_iio_triggered_buffer_setup to simplify error and remove paths, - use iio_device_claim_direct_mode instead of opencoding the same. * ak8974 - mark the INT_CLEAR register as precious to prevent debugfs access. * apds9300 - constify the i2c_device_id. * at91-sama5 adc - add missing Kconfig dependency. * bma180 accel - constify the i2c_device_id. * rockchip_saradc - explicitly request exclusive reset control as part of the reset rework on going throughout the kernel. * st_accel - fix drdy configuration for a load of accelerometers that only have the int1 line. Fix is unimportant as presumably no deviec tree actually used the non existent hardware line. * st_pressure - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support as they don't have this. Fix is unimportant as presumably no device tree actually used the non existent hardware line. * stm32-dac - explicitly request exclusive reset control (part of reset being reworked). * tsl2583 - constify the i2c_device_id. * xadc - coding style fixes. 
Jonathan writes:

Second set of IIO new device support, features and cleanup for the 4.14 cycle.

New device support:
* ak8974
  - support the AMI306.
* st_magnetometer
  - add support for the LIS2MDL with bindings.
* rockchip-saradc
  - add binding for rv1108 SoC (no driver change).
* srf08
  - add srf02 (i2c only) and srf10 support.
* stm32-timer
  - support for the STM32H7 to existing driver.

Features:
* tools
  - move over to the tools buildsystem rather than hand rolling.
  - add an install section to the build.
* ak8974
  - use serial number to add device randomness.
  - add AMI306 calibration data output.
* ccs811
  - triggered buffer support.
* srf08
  - add a device tree table as the old style i2c probing is going away,
  - add triggered buffer support
* st32-adc
  - add optional st,min-sample-time-nsecs binding to allow control of
    sampling against analog circuitry.
* stm32-timer
  - add output compare triggers.
* ti-ads1015
  - add threshold event support.
* ti-ads7950
  - Allow use on ACPI platforms including providing a default reference
    voltage as there is no way to obtain this on ACPI currently.

Cleanup and fixes:
* ad7606
  - fix an error return code in probe.
* ads1015
  - fix incorrect data rate setting update when capture in progress,
  - fix wrong scale information for the ADS1115,
  - make conversions work when CONFIG_PM is not set,
  - make sure we don't get a stale result after a runtime resume by
    ensuring we wait long enough,
  - avoid returning a false error form the buffer setup callbacks,
  - add enough wait time to get the correct conversion,
  - remove an unnecessary config register update,
  - add a helper to set conversion mode reducing repeated boilerplate,
  - use devm_iio_triggered_buffer_setup to simplify error and remove
    paths,
  - use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
  - mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
  - constify the i2c_device_id.
* at91-sama5 adc
  - add missing Kconfig dependency.
* bma180 accel
  - constify the i2c_device_id.
* rockchip_saradc
  - explicitly request exclusive reset control as part of the reset rework
    on going throughout the kernel.
* st_accel
  - fix drdy configuration for a load of accelerometers that only have
    the int1 line.  Fix is unimportant as presumably no deviec tree actually
    used the non existent hardware line.
* st_pressure
  - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
    as they don't have this. Fix is unimportant as presumably no device tree
    actually used the non existent hardware line.
* stm32-dac
  - explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
  - constify the i2c_device_id.
* xadc
  - coding style fixes.
iio: light: tsl2583: constify i2c_device_id 2017-08-20T09:17:23+00:00 Arvind Yadav arvind.yadav.cs@gmail.com 2017-08-19T18:47:38+00:00 3282fa3c0a108ac21b4c5a4818e70f510d582676 i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>