Pull spi updates from Mark Brown:
 "Quite a lot of activity in SPI this cycle, almost all of it in drivers
  with a few minor improvements and tweaks in the core.

   - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
   - Support for big endian in the bcm63xx driver.
   - Multiple slave support for the mt8173
   - New driver for the auxiliary SPI controller in bcm2835 SoCs.
   - Support for Layerscale SoCs in the Freescale DSPI driver"

* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
  spi: pxa2xx: Add support for Intel Broxton
  spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
  spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
  spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
  spi: Add DSPI support for layerscape family
  spi: ti-qspi: improve ->remove() callback
  spi/spi-xilinx: Fix race condition on last word read
  spi: Drop owner assignment from spi_drivers
  spi: Add THIS_MODULE to spi_driver in SPI core
  spi: Setup the master controller driver before setting the chipselect
  spi: dw: replace magic constant by DW_SPI_DR
  spi: mediatek: mt8173 spi multiple devices support
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: Update document devicetree bindings to support multiple devices
  spi: fix kernel-doc warnings about missing return desc in spi.c
  spi: fix kernel-doc warnings about missing return desc in spi.h
  spi: pxa2xx: Align a few defines
  spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
  ...

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Support for MS8607 temperature, pressure & humidity sensor.
This part is using functions from MS5637 for temperature and pressure
and HTU21 for humidity

Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Support for MS5637 temperature & pressure sensor

Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This adds a debugfs hook to read/write registers in the ST
sensors using debugfs. Proved to be awesome help when trying
to debug why IRQs do not arrive.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch permits to configure the WhoAmI register address
because some device could have not a standard address for
this register.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Reviewed-by: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

MS5607 is temperature and pressure sensor which hardware is similar to MS5611.
Both sensors share command protocol and support both I2C and SPI serial
protocols. They only differ in compensation algorithms.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

IIO_CHAN_INFO_SCALE is useful whenever conversion to standard units is done
in userspace. In this case conversion is handled by driver so this bit
is unnecessary.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>