linux-toradex.git/drivers/iio, branch v4.19-rc8

Merge tag 'iio-fixes-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2018-09-09T07:33:29+00:00

Jonathan writes:

First set of IIO fixes for the 4.19 cycle.

* ad9523
  - sysfs write should return the number of characters used or an error, not
    0 which could result in an infinite loop in userspace.
* lsm6dsx
  - Fix computation of length when updating the watermark to include
    timestamps avoiding the watermark being set earlier than intended.
* maxim_thermocouple
  - Revert a patch adding the max31856 as it's not actually compatible with
    the register set that this driver supports.
* si1133
  - Fix an impossible value check so we don't always error out whether the
    passed in value is good or bad.

iio: imu: st_lsm6dsx: take into account ts samples in wm configuration

2018-09-02T20:19:53+00:00

Take into account hw timer samples in pattern length computation done
in st_lsm6dsx_update_watermark routine for watermark configuration.
Moreover use samples in pattern (sip) already computed in
st_lsm6dsx_update_decimators routine

Fixes: 213451076bd3 ("iio: imu: st_lsm6dsx: add hw timestamp support")
Signed-off-by: Lorenzo Bianconi 
Signed-off-by: Jonathan Cameron

Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"

2018-09-02T09:13:06+00:00

This reverts commit 535fba29b3e1afef4ba201b3c69a6992583ec0bd.

Seems the submitter (er me, hang head in shame) didn't look at the datasheet
enough to see that the registers are quite different.

This needs to be reverted because a) would never work b) to open it  be added
to a Maxim RTDs (Resistance Temperature Detectors) under development by author

Signed-off-by: Matt Ranostay 
Signed-off-by: Jonathan Cameron

treewide: convert ISO_8859-1 text comments to utf-8

2018-08-24T01:48:43+00:00

Almost all files in the kernel are either plain text or UTF-8 encoded.  A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.

This converts them all to UTF-8 for consistency.

Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann 
Acked-by: Simon Horman 			[IPVS portion]
Acked-by: Jonathan Cameron 	[IIO]
Acked-by: Michael Ellerman 			[powerpc]
Acked-by: Rob Herring 
Cc: Joe Perches 
Cc: Arnd Bergmann 
Cc: Samuel Ortiz 
Cc: "David S. Miller" 
Cc: Rob Herring 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2018-08-22T00:40:46+00:00

Pull i2c updates from Wolfram Sang:

 - the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

 - locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

 - the gpio fault injector got a new delicate testcase

 - the bus recovery procedure got fixed to handle the new testcase
   correctly

 - a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

 - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

 - and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

iio: light: si1133: fix uninitialized resp variable

2018-08-01T18:01:35+00:00

Read response register to detect any error.

Signed-off-by: Maxime Roussin-Bélanger 
Reported-by: Dan Carpenter 
Signed-off-by: Jonathan Cameron

Merge branch 'fixes-togreg' into togreg

2018-08-01T17:56:17+00:00

iio: light: si1133 fix test for val being not zero or not one.

2018-07-30T18:28:47+00:00

The current check on val always results in true and so the
call to sii1133_update_adcsens never gets called. Fix this check
so it returns with -EINVAL only when val is not zero and not one.

Detected by CoverityScan, CID#1472099 ("Logically dead code")

Fixes: e01e7eaf37d8 ("iio: light: introduce si1133")
Signed-off-by: Colin Ian King 
Signed-off-by: Jonathan Cameron

iio: adc: xilinx: Move request_irq before enabling interrupts

2018-07-29T12:30:35+00:00

Enabling the Interrupts before registering the irq handler is a bad
idea. This patch corrects the same for XADC driver.

Signed-off-by: Manish Narani 
Signed-off-by: Jonathan Cameron

iio: adc: xilinx: Remove platform_get_irq from xadc_remove function

2018-07-29T11:52:21+00:00

This patch avoids getting irq number in xadc_remove function. Instead
store 'irq' in xadc struct and use xadc->irq wherever needed.
This patch also resolves a warning reported by coverity where it asks to
check return value of platform_get_irq() for any errors in xadc_remove.

Signed-off-by: Manish Narani 
Signed-off-by: Jonathan Cameron