linux-toradex.git/drivers/iio, branch v4.4.114

iio: light: fix improper return value

2017-11-30T08:37:27+00:00

[ Upstream commit db4e5376d058af8924fafd0520a0942d92538d0e ]

In function cm3232_reg_init(), it returns 0 even if the last call to
i2c_smbus_write_byte_data() returns a negative value (indicates error).
As a result, the return value may be inconsistent with the execution
status, and the caller of cm3232_reg_init() will not be able to detect
the error. This patch fixes the bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641

Signed-off-by: Pan Bian 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: trigger: free trigger resource correctly

2017-11-15T16:13:10+00:00

[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: adc: xilinx: Fix error handling

2017-10-21T15:09:04+00:00

[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ]

Reorder error handling labels in order to match the way resources have
been allocated.

Signed-off-by: Christophe JAILLET 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp320x: Fix oops on module unload

2017-10-12T09:27:34+00:00

commit 0964e40947a630a2a6f724e968246992f97bcf1c upstream.

The driver calls spi_get_drvdata() in its ->remove hook even though it
has never called spi_set_drvdata().  Stack trace for posterity:

Unable to handle kernel NULL pointer dereference at virtual address 00000220
Internal error: Oops: 5 [#1] SMP ARM
[<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio])
[<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x])
[<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44)
[<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134)
[<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0)
[<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0)
[<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58)
[<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x])
[<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0)
[<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c)

Fixes: f5ce4a7a9291 ("iio: adc: add driver for MCP3204/08 12-bit ADC")
Cc: Oskar Andero 
Signed-off-by: Lukas Wunner 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp320x: Fix readout of negative voltages

2017-10-12T09:27:34+00:00

commit e6f4794371ee7cce1339e7ca9542f1e703c5f84a upstream.

Commit f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301")
returns a signed voltage from mcp320x_adc_conversion() but neglects that
the caller interprets a negative return value as failure.  Only mcp3301
(and the upcoming mcp3550/1/3) is affected as the other chips are
incapable of measuring negative voltages.

Fix and while at it, add mcp3301 to the list of supported chips at the
top of the file.

Fixes: f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301")
Cc: Andrea Galbusera 
Signed-off-by: Lukas Wunner 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: ad7793: Fix the serial interface reset

2017-10-12T09:27:34+00:00

commit 7ee3b7ebcb74714df6d94c8f500f307e1ee5dda5 upstream.

The serial interface can be reset by writing 32 consecutive 1s to the device.
'ret' was initialized correctly but its value was overwritten when
ad7793_check_platform_data() was called. Since a dedicated reset function
is present now, it should be used instead.

Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799")
Signed-off-by: Dragos Bogdan 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: core: Return error for failed read_reg

2017-10-12T09:27:34+00:00

commit 3d62c78a6eb9a7d67bace9622b66ad51e81c5f9b upstream.

If an IIO device returns an error code for a read access via debugfs, it
is currently ignored by the IIO core (other than emitting an error
message). Instead, return this error code to user space, so upper layers
can detect it correctly.

Signed-off-by: Matt Fornero 
Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T09:27:34+00:00

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream.

Since most of the SD ADCs have the option of reseting the serial
interface by sending a number of SCLKs with CS = 0 and DIN = 1,
a dedicated function that can do this is usefull.

Needed for the patch:  iio: ad7793: Fix the serial interface reset
Signed-off-by: Dragos Bogdan 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'

2017-10-12T09:27:34+00:00

commit 7f70be6e4025db0551e6863e7eb9cca07122695c upstream.

Commit 7cc97d77ee8a has introduced a call to 'regulator_disable()' in the
.remove function.
So we should also have such a call in the .probe function in case of
error after a successful 'regulator_enable()' call.

Add a new label for that and use it.

Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'

2017-10-12T09:27:34+00:00

commit 245a396a9b1a67ac5c3228737c261b3e48708a2a upstream.

If 'devm_regulator_get()' fails, we should go through the existing error
handling path instead of returning directly, as done is all the other
error handling paths in this function.

Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman