Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc and other driver subsystem changes
  for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
  new driver development and minor fixes.

  Highlights include:

   - fastrpc driver updates

   - iio new drivers and updates

   - habanalabs driver updates for new hardware and features

   - slimbus driver updates

   - speakup module parameters added to aid in boot time configuration

   - i2c probe_new conversions for lots of different drivers

   - other small driver fixes and additions

  One semi-interesting change in here is the increase of the number of
  misc dynamic minors available to 1048448 to handle new huge-cpu
  systems.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
  extcon: usbc-tusb320: Convert to i2c's .probe_new()
  extcon: rt8973: Convert to i2c's .probe_new()
  extcon: fsa9480: Convert to i2c's .probe_new()
  extcon: max77843: Replace irqchip mask_invert with unmask_base
  chardev: fix error handling in cdev_device_add()
  mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
  drivers: mcb: fix resource leak in mcb_probe()
  coresight: etm4x: fix repeated words in comments
  coresight: cti: Fix null pointer error on CTI init before ETM
  coresight: trbe: remove cpuhp instance node before remove cpuhp state
  counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
  misc: fastrpc: Add mmap request assigning for static PD pool
  misc: fastrpc: Safekeep mmaps on interrupted invoke
  misc: fastrpc: Add support for audiopd
  misc: fastrpc: Rework fastrpc_req_munmap
  misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
  misc: fastrpc: Add fastrpc_remote_heap_alloc
  misc: fastrpc: Add reserved mem support
  misc: fastrpc: Rename audio protection domain to root
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Cypress Generation 5 touchscreens

 - a new driver for Hynitron cstxxx touchscreens

 - a new driver for Himax hx83112b touchscreen

 - I2C input devices have been converted to use i2c's probe_new()

 - a large number of input devices are now using
   DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
   __maybe_unused annotations

 - improvements to msg2638 touchscreen driver to also support msg2138

 - conversion of several input deevine bindings to yaml/DT schema

 - changes to select touch drivers to move handling of wake irqs to the
   PM core

 - other assorted fixes and improvements.

* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
  Input: elants_i2c - delay longer with reset asserted
  dt-bindings: input: Convert ti,drv260x to DT schema
  dt-bindings: input: gpio-beeper: Convert to yaml schema
  Input: pxspad - fix unused data warning when force feedback not enabled
  Input: lpc32xx - allow building with COMPILE_TEST
  Input: nomadik-ske-keypad - allow building with COMPILE_TEST
  Input: pxa27xx-keypad - allow build with COMPILE_TEST
  Input: spear-keyboard - improve build coverage using COMPILE_TEST
  Input: tegra-kbc - allow build with COMPILE_TEST
  Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

Jonathan writes:

4th set of IIO fixes for 6.1

Single patch fixing a memory leak in an error path.
Fine to queue either for 6.2 if too late for 6.1

* tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: fix memory leak in iio_device_register_eventset()
  dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
  iio: adc: aspeed: Remove the trim valid dts property.
  iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
  iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
  iio: light: rpr0521: add missing Kconfig dependencies
  iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
  iio: health: afe4403: Fix oob read in afe4403_read_raw
  iio: light: apds9960: fix wrong register for gesture gain

Jonathan writes:

2nd set of IIO new device support, cleanups etc for 6.2

Includes a few late breaking fixes for old issues.

Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().

New devices support
* adi,ad74115
  - New driver for this complex input/output device with 16 bit ADCs,
    14 bit DACs amongst other features.
  - A few tidy ups / removal of unused data patches followed.
* adi,adf4377
  - New driver for this dual output integer-N phased locked loop and VCO
    chip.
* maxim,max30208
  - New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
  - Support for LSM6DS016IS (chip specific data)
  - Support for ISM330IS (id entry only)

Minor cleanups etc
* adi,adis
  - Fix a deadlock on device instance specific mutex.
  - Tidy up by calling unlocked form of __adis_initial_startup() in all
    cases and dropping the locked version.
* adi,ad4130
  - Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
  - Fix a bug brought on by integer promotion of signed value to unsigned type.
  - Add an spi_device_id table to allow module autoloading to work.
  - Add support for reset pin.
* adi,ad7606_par
  - devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
  - Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
    for ad7924.
* adi,ltc2983
  - Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
    unit.
* maxim,max11410
  - Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
  - Add fallback compatibles to dt-binding.
* renesas,rzg2l
  - Document use for RZ/Five SoC.
* st,stm32-adc
  - Improved calibration support with error logging and a debugfs
    interface to read back the result.
* ti,adc128s052
  - Fix an issue with missing data members in the adc128_of_match table that
    meant all device were being handled as adc128s052 ADCs.

* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
  iio: addac: ad74413r: fix blank line after declaration warning
  iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
  dt-bindings: iio: imu: st_lsm6dsx: add ism330is
  iio: imu: st_lsm6dsx: add support to ISM330IS
  iio: frequency: adf4377: add support for ADF4377
  dt-bindings: iio: frequency: add adf4377 doc
  dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
  dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
  dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
  iio: adc128s052: add proper .data members in adc128_of_match table
  iio: adc: stm32-adc: add debugfs to read raw calibration result
  iio: adc: stm32-adc: improve calibration error log
  iio: adc: stm32-adc: smart calibration support
  iio: addac: ad74413r: add support for reset-gpio
  dt-bindings: iio: ad74413r: add optional reset-gpios
  iio: addac: ad74413r: add spi_device_id table
  dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
  iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
  iio: addac: add AD74115 driver
  ...

Jonathan writes:

1st set of IIO new device support, feature and cleanup for 6.2 (take2)

We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes.  Now it is just used to
protect device mode transitions (typically to and from buffered capture).

Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).

Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.

New device support
* adi,ad4310
  - New driver to support this very flexible measurement device including
    a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
  - Add support of the ADXL359 accelerometer.
* adi,ltc2983
  - Support additional variants of the temperatures sensor:
    LTC2984 with an EEPROM
    LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
  - Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
  - New driver for this 3 axis accelerometer.
* maxim,max11401
  - New driver to support this 24-bit 10 channel ADC.
    Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
  - Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
  - Add support for LSM6DSV accelerometer and gyroscope. Simple additional
    of chip specific data and IDs.
  - Add support for LSM6DSV16X accelerometer and gyroscope.  Compatible with
    features currently implemented for the LSM6DSV.
* st,stm32-adc
  - Add support for stm32pm13x SoCs.

core / subsystem wide:
 - Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
   allow for the wrapping of attributes in the code that duplicates them
   for multiple buffers.
 - Harden against future issues with expectation that all buffer attributes
   are iio_dev_attrs by changing the code to take an array of pointers
   of the correct type.
 - Last transitions of drivers to local locks rather than missuses of mlock.
 - Add an iio_device_claim_buffer_mode() callback to avoid a race in the
   max30100 driver without directly using mlock.
 - Move mlock to the opaque IIO device structure to prevent misuse.
 - Add missing spi_device_id tables to support auto loading of modules.
 - Update some ADI maintainers in DT bindings.
 - A few more moves of bus drivers and core module sets to export
   name spaces.
 - Extensive use of new devm_regulator_get_enable() and friends.
 - Switch a bunch of i2c drivers to probe_new() including the bmp280
   which makes use of the new i2c_client_get_device_id() helper to
   simplify this change.

dt-bindings:
 - More use of spi-peripheral-props.yaml.

Features
* freescale,mpl115
  - Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
  - More sophisticated runtime power management
  - Provide access to sampling frequency.
  - Trivial follow up fixes.
* microchip,mcp3911
  - Support control of PGA.
* st,lsm6dsx
  - Add support for software triggers for cases where the IRQ lines
    are not wired up.
* vishay,vcnl4000
  - Add control of integration time.

Minor cleanups and fixes
* adi,ad4130
  - Improve ABI documentation formatting.
  - Kconfig dependency fixup.
* adi,ad5758
  - Minor dt binding fix.
* adi,ad9834
  - Tidy up line breaks.
* adi,ade7854
  - Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
  - Harden code against hardware returning wrong values.
* adi,adxl355
  - Warn only if unknown device ID detected to allow for fall back
    device tree compatibles on future devices.
* adi,ltc2983
  - dt-bindings clarifications and general improvements.
  - Ensure DMA safe buffer for bulk writes without relying on current
    regmap implementation choices.
* avago,adps9960
  - Fix up a disconnect between event enable attributes and what was
    enabled.
* bosch,bma400
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
  - Fully devm managed probe() and related tidying up.
* meas,ms5611
  - Add an example of spi-max-frequency.
* meleixs,mlx90632
  - Tidy up confusing error return value.
  - Style improvements.
* multiplexer
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
  - Minor dt binding improvements.
* rockchip,saradc
  - Add ID for rv1126.
* semtech,sx9360
  - Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
    but is in the wild.
* st,lsm6dsx
  - Factor out common code as _device_set_enable().
  - Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
  - Manage the min sampling time on all internal channels.
* trig,sysfs
  - Improve error labels.

* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
  iio: pressure: bmp280: convert to i2c's .probe_new()
  iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
  iio: adc: ad4130: depend on GPIOLIB
  staging: iio: meter: replace ternary operator by if condition
  iio: light: apds9960: Fix iio_event_spec structures
  dt-bindings: iio: imu: Add inv_icm42600 documentation
  iio: imu: inv_icm42600: Add support for icm42631
  dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
  dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
  iio: imu: st_lsm6dsx: add support to LSM6DSV16X
  iio: proximity: sx9360: Add a new ACPI hardware ID
  iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
  iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
  iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: use generic node name in example
  dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
  dt-bindings: iio: temperature: ltc2983: refine descriptions
  dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
  ...

Checkpatch wants a blank line after all declarations. Add it now,
even though the patch has already been submitted.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221124153049.8851-1-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This table was supposed to be used for handling the DAC rate, but it
ended up being unused. Remove it.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221124152559.7895-1-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support to STM ISM330IS (accelerometer and gyroscope) Mems sensor.
The ISM330IS sensor can use LSM6DSO16IS as fallback device since it
implements all the ISM330IS features currently implemented in
st_lsm6dsx.

Datasheet: https://www.st.com/resource/en/datasheet/ism330is.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4cd1614060e06f49cd92f5930d8fd40117c07920.1669279604.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ADF4377 is a high performance, ultralow jitter, dual output integer-N
phased locked loop (PLL) with integrated voltage controlled oscillator
(VCO) ideally suited for data converter and mixed signal front end (MxFE)
clock applications.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4377.pdf
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221115110041.71495-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Prior to commit bd5d54e4d49d ("iio: adc128s052: add ACPI _HID
AANT1280"), the driver unconditionally used spi_get_device_id() to get
the index into the adc128_config array.

However, with that commit, OF-based boards now incorrectly treat all
supported sensors as if they are an adc128s052, because all the .data
members of the adc128_of_match table are implicitly 0. Our board,
which has an adc122s021, thus exposes 8 channels whereas it really
only has two.

Fixes: bd5d54e4d49d ("iio: adc128s052: add ACPI _HID AANT1280")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221115132324.1078169-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>