linux-toradex.git/drivers/infiniband/ulp/srpt, branch v3.14.4

ib_srpt: Use correct ib_sg_dma primitives

2014-05-06T14:59:28+00:00

commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream.

The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().

This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.

Cc: Bart Van Assche 
Reviewed-by: Dennis Dalessandro 
Tested-by: Vinod Kumar 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

IB/srpt: replace strict_strtoul() with kstrtoul()

2014-02-12T23:14:40+00:00

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2013-11-22T18:52:03+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -> (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...

target: Drop left-over se_lun->lun_cmd_list shutdown code

2013-11-07T22:25:02+00:00

Now with percpu refcounting for se_lun in place, go ahead and drop
the legacy per se_cmd accounting for se_lun shutdown.

This includes __transport_clear_lun_from_sessions(), the associated
transport_lun_wait_for_tasks() logic, along with a handful of now
unused se_cmd structure members and ->transport_state bits.

Cc: Kent Overstreet 
Signed-off-by: Nicholas Bellinger

ib_srpt: always set response for task management

2013-10-03T11:23:17+00:00

The SRP specification requires:

  "Response data shall be provided in any SRP_RSP response that is sent in
   response to an SRP_TSK_MGMT request (see 6.7). The information in the
   RSP_CODE field (see table 24) shall indicate the completion status of
   the task management function."

So fix this to avoid the SRP initiator interprets task management functions
that succeeded as failed.

Signed-off-by: Jack Wang 
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger

ib_srpt: Destroy cm_id before destroying QP.

2013-10-02T04:27:30+00:00

This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called
after srpt_destroy_ch_ib() had destroyed the active QP.

This would result in the following failed SRP_LOGIN_REQ messages:

Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)

Reported-by: Navin Ahuja 
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger

target: make queue_tm_rsp() return void

2013-07-08T01:36:53+00:00

The return value wasn't checked by any of the callers.  Assuming this is
correct behaviour, we can simplify some code by not bothering to
generate it.

nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around
     srpt_queue_response() void return

Signed-off-by: Joern Engel 
Signed-off-by: Nicholas Bellinger

ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session

2013-05-30T04:30:46+00:00

Given that srpt_release_channel_work() calls target_wait_for_sess_cmds()
to allow outstanding se_cmd_t->cmd_kref a change to complete, the call
to perform target_sess_cmd_list_set_waiting() needs to happen in
srpt_shutdown_session()

Also, this patch adds an explicit call to srpt_shutdown_session() within
srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be
called in the cases where TFO->shutdown_session() is not triggered
directly by TCM.

Cc: Joern Engel 
Cc: Roland Dreier 
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger

target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds

2013-05-21T04:44:10+00:00

Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds
shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers.

Cc: Joern Engel 
Cc: Roland Dreier 
Signed-off-by: Nicholas Bellinger

SRPT: Fix odd use of WARN_ON()

2013-04-17T05:58:08+00:00

While WARN_ON("const string") will work, it's intent is not obvious.
The warning is more useful by showing the "state" value.

Signed-off-by: Grant Grundler 
Signed-off-by: Roland Dreier