linux-toradex.git/drivers/infiniband/ulp, branch v3.10.28

iser-target: fix error return code in isert_create_device_ib_res()

2014-01-09T20:24:20+00:00

commit 94a7111043d99819cd0a72d9b3174c7054adb2a0 upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

IB/srp: Report receive errors correctly

2013-12-04T18:56:17+00:00

commit cd4e38542a5c2cab94e5410fb17c1cc004a60792 upstream.

The IB spec does not guarantee that the opcode is available in error
completions.  Hence do not rely on it.  See also commit 948d1e889e5b
("IB/srp: Introduce srp_handle_qp_err()").

Signed-off-by: Bart Van Assche 
Signed-off-by: Roland Dreier 
Signed-off-by: Greg Kroah-Hartman

ib_srpt: always set response for task management

2013-10-13T23:08:33+00:00

commit c807f64340932e19f0d2ac9b30c8381e1f60663a upstream.

The SRP specification requires:

  "Response data shall be provided in any SRP_RSP response that is sent in
   response to an SRP_TSK_MGMT request (see 6.7). The information in the
   RSP_CODE field (see table 24) shall indicate the completion status of
   the task management function."

So fix this to avoid the SRP initiator interprets task management functions
that succeeded as failed.

Signed-off-by: Jack Wang 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

ib_srpt: Destroy cm_id before destroying QP.

2013-10-13T23:08:33+00:00

commit 0b41d6ca616ddeb3b6c0a80e8770b6f53cd42806 upstream.

This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called
after srpt_destroy_ch_ib() had destroyed the active QP.

This would result in the following failed SRP_LOGIN_REQ messages:

Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2)
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)
mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9
rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.
Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1)

Reported-by: Navin Ahuja 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

2013-08-04T08:51:17+00:00

commit 561bf15892375597ee59d473a704a3e634c4f311 upstream

This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd()
in order to avoid external iscsit_reject_cmd() reject usage for all
PDU types.

It also updates PDU specific handlers for traditional iscsi-target
code to not reset the session after posting a ISCSI_OP_REJECT during
setup.

(v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call
     target_put_sess_cmd() after iscsit_sequence_cmd() failure)

Signed-off-by: Nicholas Bellinger 
Cc: Or Gerlitz 
Cc: Mike Christie 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix iscsit_add_reject* usage for iser

2013-08-04T08:51:17+00:00

commit ba159914086f06532079fc15141f46ffe7e04a41 upstream

This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd()
usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use
usage bug in v3.10 with iser-target code.

It saves ->reject_reason for use within iscsit_build_reject() so the
correct value for both transport cases.  It also drops the legacy
fail_conn parameter usage throughput iscsi-target code and adds
two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions,
along with various small cleanups.

(v2: Re-enable target_put_sess_cmd() to be called from
     iscsit_add_reject_from_cmd() for rejects invoked after
     target_get_sess_cmd() has been called)

Signed-off-by: Nicholas Bellinger 
Cc: Or Gerlitz 
Cc: Mike Christie 
Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser

2013-08-04T08:50:34+00:00

commit 186a9647019587b3784694894c4d136fd00cfd7b upstream.

This patch adds target_get_sess_cmd reference counting for
iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd()
for the failure case.

It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands
where leaking iscsi_cmd->i_conn_node and eventually triggering
an OOPs during struct isert_conn shutdown.

Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED

2013-08-04T08:50:33+00:00

commit b2cb96494d83b894a43ba8b9023eead8ff50684b upstream.

This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur
before the connection shutdown has been completed by rx/tx threads,
that causes isert_free_conn() to wait indefinately on ->conn_wait.

This patch allows isert_disconnect_work code to invoke rdma_disconnect
when isert_disconnect_work() process context is started by client
session reset before isert_free_conn() code has been reached.

It also adds isert_conn->conn_mutex protection for ->state within
isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn()
code, along with isert_check_state() for wait_event usage.

(v2: Add explicit iscsit_cause_connection_reinstatement call
     during isert_disconnect_work() to force conn reset)

Cc: Or Gerlitz 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix isert_put_reject payload buffer post

2013-08-04T08:50:32+00:00

commit 3df8f68aaf7ebe3d136a22262b41b350b0a1858b upstream.

This patch adds the missing isert_put_reject() logic to post
a outgoing payload buffer to hold the 48 bytes of original PDU
header request payload for the rejected cmd.

It also fixes ISTATE_SEND_REJECT handling in isert_response_completion()
-> isert_do_control_comp() code, and drops incorrect iscsi_cmd_t->reject_comp
usage.

Signed-off-by: Nicholas Bellinger 
Cc: Or Gerlitz 
Cc: Mike Christie 
Signed-off-by: Greg Kroah-Hartman

IB/iser: Add Mellanox copyright

2013-06-05T00:03:12+00:00

Add Mellanox copyright to the iser initiator source code which I maintain.

Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier