linux-toradex.git/drivers/infiniband/ulp, branch v3.10.78

iser-target: Fix implicit termination of connections

2015-02-06T06:35:41+00:00

commit b02efbfc9a051b41e71fe8f94ddf967260e024a6 upstream.

In situations such as bond failover, The new session establishment
implicitly invokes the termination of the old connection.

So, we don't want to wait for the old connection wait_conn to completely
terminate before we accept the new connection and post a login response.

The solution is to deffer the comp_wait completion and the conn_put to
a work so wait_conn will effectively be non-blocking (flush errors are
assumed to come very fast).

We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE
to spread the concurrency of release works.

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Handle ADDR_CHANGE event for listener cm_id

2015-02-06T06:35:41+00:00

commit ca6c1d82d12d8013fb75ce015900d62b9754623c upstream.

The np listener cm_id will also get ADDR_CHANGE event
upcall (in case it is bound to a specific IP). Handle
it correctly by creating a new cm_id and implicitly
destroy the old one.

Since this is the second event a listener np cm_id may
encounter, we move the np cm_id event handling to a
routine.

Squashed:

iser-target: Move cma_id setup to a function

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix connected_handler + teardown flow race

2015-02-06T06:35:41+00:00

commit 19e2090fb246ca21b3e569ead51a6a7a1748eadd upstream.

Take isert_conn pointer from cm_id->qp->qp_context. This
will allow us to know that the cm_id context is always
the network portal. This will make the cm_id event check
(connection or network portal) more reliable.

In order to avoid a NULL dereference in cma_id->qp->qp_context
we destroy the qp after we destroy the cm_id (and make the
dereference safe). session stablishment/teardown sequences
can happen in parallel, we should take into account that
connected_handler might race with connection teardown flow.

Also, protect isert_conn->conn_device->active_qps decrement
within the error patch during QP creation failure and the
normal teardown path in isert_connect_release().

Squashed:

iser-target: Decrement completion context active_qps in error flow

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Parallelize CM connection establishment

2015-02-06T06:35:41+00:00

commit 2371e5da8cfe91443339b54444dec6254fdd6dfc upstream.

There is no point in accepting a new CM request only
when we are completely done with the last iscsi login.
Instead we accept immediately, this will also cause the
CM connection to reach connected state and the initiator
is allowed to send the first login. We mark that we got
the initial login and let iscsi layer pick it up when it
gets there.

This reduces the parallel login sequence by a factor of
more then 4 (and more for multi-login) and also prevents
the initiator (who does all logins in parallel) from
giving up on login timeout expiration.

In order to support multiple login requests sequence (CHAP)
we call isert_rx_login_req from isert_rx_completion insead
of letting isert_get_login_rx call it.

Squashed:

iser-target: Use kref_get_unless_zero in connected_handler
iser-target: Acquire conn_mutex when changing connection state
iser-target: Reject connect request in failure path

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix flush + disconnect completion handling

2015-02-06T06:35:41+00:00

commit 128e9cc84566a84146baea2335b3824288eed817 upstream.

ISER_CONN_UP state is not sufficient to know if
we should wait for completion of flush errors and
disconnected_handler event.

Instead, split it to 2 states:
- ISER_CONN_UP: Got to CM connected phase, This state
indicates that we need to wait for a CM disconnect
event before going to teardown.

- ISER_CONN_FULL_FEATURE: Got to full feature phase
after we posted login response, This state indicates
that we posted recv buffers and we need to wait for
flush completions before going to teardown.

Also avoid deffering disconnected handler to a work,
and handle it within disconnected handler.
More work here is needed to handle DEVICE_REMOVAL event
correctly (cleanup all resources).

Squashed:

iser-target: Don't deffer disconnected handler to a work

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iscsi,iser-target: Initiate termination only once

2015-02-06T06:35:41+00:00

commit 954f23722b5753305be490330cf2680b7a25f4a3 upstream.

Since commit 0fc4ea701fcf ("Target/iser: Don't put isert_conn inside
disconnected handler") we put the conn kref in isert_wait_conn, so we
need .wait_conn to be invoked also in the error path.

Introduce call to isert_conn_terminate (called under lock)
which transitions the connection state to TERMINATING and calls
rdma_disconnect. If the state is already teminating, just bail
out back (temination started).

Also, make sure to destroy the connection when getting a connect
error event if didn't get to connected (state UP). Same for the
handling of REJECTED and UNREACHABLE cma events.

Squashed:

iscsi-target: Add call to wait_conn in establishment error flow

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

ib_isert: Add max_send_sge=2 minimum for control PDU responses

2015-02-06T06:35:40+00:00

commit f57915cfa5b2b14c1cffa2e83c034f55e3f0e70d upstream.

This patch adds a max_send_sge=2 minimum in isert_conn_setup_qp()
to ensure outgoing control PDU responses with tx_desc->num_sge=2
are able to function correctly.

This addresses a bug with RDMA hardware using dev_attr.max_sge=3,
that in the original code with the ConnectX-2 work-around would
result in isert_conn->max_sge=1 being negotiated.

Originally reported by Chris with ocrdma driver.

Reported-by: Chris Moore 
Tested-by: Chris Moore 
Signed-off-by: Or Gerlitz 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

IB/isert: Adjust CQ size to HW limits

2015-02-06T06:35:40+00:00

commit b1a5ad006b34ded9dc7ec64988deba1b3ecad367 upstream.

isert has an issue of trying to create a CQ with more CQEs than are
supported by the hardware, that currently results in failures during
isert_device creation during first session login.

This is the isert version of the patch that Minh Tran submitted for
iser, and is simple a workaround required to function with existing
ocrdma hardware.

Signed-off-by: Chris Moore 
Reviewied-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Handle DEVICE_REMOVAL event on network portal listener correctly

2014-12-06T23:05:49+00:00

commit 3b726ae2de02a406cc91903f80132daee37b6f1b upstream.

In this case the cm_id->context is the isert_np, and the cm_id->qp
is NULL, so use that to distinct the cases.

Since we don't expect any other events on this cm_id we can
just return -1 for explicit termination of the cm_id by the
cma layer.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

srp-target: Retry when QP creation fails with ENOMEM

2014-12-06T23:05:49+00:00

commit ab477c1ff5e0a744c072404bf7db51bfe1f05b6e upstream.

It is not guaranteed to that srp_sq_size is supported
by the HCA. So if we failed to create the QP with ENOMEM,
try with a smaller srp_sq_size. Keep it up until we hit
MIN_SRPT_SQ_SIZE, then fail the connection.

Reported-by: Mark Lehrer 
Signed-off-by: Bart Van Assche 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman