linux-toradex.git/drivers/infiniband, branch v3.10.78

IB/mlx4: Fix WQE LSO segment calculation

2015-05-06T19:56:27+00:00

commit ca9b590caa17bcbbea119594992666e96cde9c2f upstream.

The current code decreases from the mss size (which is the gso_size
from the kernel skb) the size of the packet headers.

It shouldn't do that because the mss that comes from the stack
(e.g IPoIB) includes only the tcp payload without the headers.

The result is indication to the HW that each packet that the HW sends
is smaller than what it could be, and too many packets will be sent
for big messages.

An easy way to demonstrate one more aspect of the problem is by
configuring the ipoib mtu to be less than 2*hlen (2*56) and then
run app sending big TCP messages. This will tell the HW to send packets
with giant (negative value which under unsigned arithmetics becomes
a huge positive one) length and the QP moves to SQE state.

Fixes: b832be1e4007 ('IB/mlx4: Add IPoIB LSO support')
Reported-by: Matthew Finlay 
Signed-off-by: Erez Shitrit 
Signed-off-by: Or Gerlitz 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/core: don't disallow registering region starting at 0x0

2015-05-06T19:56:27+00:00

commit 66578b0b2f69659f00b6169e6fe7377c4b100d18 upstream.

In a call to ib_umem_get(), if address is 0x0 and size is
already page aligned, check added in commit 8494057ab5e4
("IB/uverbs: Prevent integer overflow in ib_umem_get address
arithmetic") will refuse to register a memory region that
could otherwise be valid (provided vm.mmap_min_addr sysctl
and mmap_low_allowed SELinux knobs allow userspace to map
something at address 0x0).

This patch allows back such registration: ib_umem_get()
should probably don't care of the base address provided it
can be pinned with get_user_pages().

There's two possible overflows, in (addr + size) and in
PAGE_ALIGN(addr + size), this patch keep ensuring none
of them happen while allowing to pin memory at address
0x0. Anyway, the case of size equal 0 is no more (partially)
handled as 0-length memory region are disallowed by an
earlier check.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel 
Cc: Jack Morgenstein 
Cc: Or Gerlitz 
Signed-off-by: Yann Droneaud 
Reviewed-by: Sagi Grimberg 
Reviewed-by: Haggai Eran 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/core: disallow registering 0-sized memory region

2015-05-06T19:56:27+00:00

commit 8abaae62f3fdead8f4ce0ab46b4ab93dee39bab2 upstream.

If ib_umem_get() is called with a size equal to 0 and an
non-page aligned address, one page will be pinned and a
0-sized umem will be returned to the caller.

This should not be allowed: it's not expected for a memory
region to have a size equal to 0.

This patch adds a check to explicitly refuse to register
a 0-sized region.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel 
Cc: Jack Morgenstein 
Cc: Or Gerlitz 
Signed-off-by: Yann Droneaud 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/mlx4: Saturate RoCE port PMA counters in case of overflow

2015-04-19T08:10:50+00:00

commit 61a3855bb726cbb062ef02a31a832dea455456e0 upstream.

For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of
overflow, according to the IB spec, we have to saturate a counter to its
max value, do that.

Fixes: c37791349cc7 ('IB/mlx4: Support PMA counters for IBoE')
Signed-off-by: Majd Dibbiny 
Signed-off-by: Eran Ben Elisha 
Signed-off-by: Hadar Hen Zion 
Signed-off-by: Or Gerlitz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic

2015-04-19T08:10:47+00:00

commit 8494057ab5e40df590ef6ef7d66324d3ae33356b upstream.

Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.

Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.

This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.

Addresses: CVE-2014-8159
Signed-off-by: Shachar Raindel 
Signed-off-by: Jack Morgenstein 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier 
Signed-off-by: Greg Kroah-Hartman

IB/core: Avoid leakage from kernel to user space

2015-04-19T08:10:47+00:00

commit 377b513485fd885dea1083a9a5430df65b35e048 upstream.

Clear the reserved field of struct ib_uverbs_async_event_desc which is
copied to user space.

Signed-off-by: Eli Cohen 
Reviewed-by: Yann Droneaud 
Signed-off-by: Roland Dreier 
Signed-off-by: Greg Kroah-Hartman

IB/qib: Do not write EEPROM

2015-03-18T12:22:34+00:00

commit 18c0b82a3e4501511b08d0e8676fb08ac08734a3 upstream.

This changeset removes all the code that allows the driver to write to
the EEPROM and update the recorded error counters and power on hours.

These two stats are unused and writing them exposes a timing risk
which could leave the EEPROM in a bad state preventing further normal
operation of the HCA.

Reviewed-by: Mike Marciniszyn 
Signed-off-by: Mitko Haralanov 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Roland Dreier 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix implicit termination of connections

2015-02-06T06:35:41+00:00

commit b02efbfc9a051b41e71fe8f94ddf967260e024a6 upstream.

In situations such as bond failover, The new session establishment
implicitly invokes the termination of the old connection.

So, we don't want to wait for the old connection wait_conn to completely
terminate before we accept the new connection and post a login response.

The solution is to deffer the comp_wait completion and the conn_put to
a work so wait_conn will effectively be non-blocking (flush errors are
assumed to come very fast).

We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE
to spread the concurrency of release works.

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Handle ADDR_CHANGE event for listener cm_id

2015-02-06T06:35:41+00:00

commit ca6c1d82d12d8013fb75ce015900d62b9754623c upstream.

The np listener cm_id will also get ADDR_CHANGE event
upcall (in case it is bound to a specific IP). Handle
it correctly by creating a new cm_id and implicitly
destroy the old one.

Since this is the second event a listener np cm_id may
encounter, we move the np cm_id event handling to a
routine.

Squashed:

iser-target: Move cma_id setup to a function

Reported-by: Slava Shwartsman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

iser-target: Fix connected_handler + teardown flow race

2015-02-06T06:35:41+00:00

commit 19e2090fb246ca21b3e569ead51a6a7a1748eadd upstream.

Take isert_conn pointer from cm_id->qp->qp_context. This
will allow us to know that the cm_id context is always
the network portal. This will make the cm_id event check
(connection or network portal) more reliable.

In order to avoid a NULL dereference in cma_id->qp->qp_context
we destroy the qp after we destroy the cm_id (and make the
dereference safe). session stablishment/teardown sequences
can happen in parallel, we should take into account that
connected_handler might race with connection teardown flow.

Also, protect isert_conn->conn_device->active_qps decrement
within the error patch during QP creation failure and the
normal teardown path in isert_connect_release().

Squashed:

iser-target: Decrement completion context active_qps in error flow

Signed-off-by: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman