linux-toradex.git/drivers/infiniband, branch v3.7

Merge branches 'cxgb4' and 'mlx4' into for-next

2012-10-23T16:03:49+00:00

RDMA/cxgb4: Don't free chunk that we have failed to allocate

2012-10-22T18:05:00+00:00

In the error path of registering memory when there's a failure to
allocate a chunk from the memory pool, we try to free the same chunk
we just failed to allocate, which will BUG().

Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Roland Dreier

IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization

2012-10-18T17:29:02+00:00

A client re-register event invokes cleanup of all MCGs.  This is
required to protect against misbehaved guests leading to corruption of
join/leave database.  However, since cleaning up the MCGs is a heavy
operation, it is pushed to a work queue for further processing.
Client re-register is also propagated to ULPs (e.g IPoIB).

However, since the cleanup is performed in a workqueue, the ULP could
leave and re-join groups before the cleanup occurs.  In this case,
when the cleanup takes place, it prunes the (newly-joined) MCGs and
the ULP is left without actual MCGs while believing it joined them.

Fix this by setting the flushing flag before invoking the cleanup task
and clearing it after flushing is complete.

Signed-off-by: Eli Cohen 
Reviewed-by: Jack Morgenstein 
Signed-off-by: Roland Dreier

IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF)

2012-10-18T17:29:02+00:00

In the MAD paravirtualization code, one of the checks performed when
forwarding QP1 (GSI) packets from wire to slave was a P_Key check: the
P_Key received in the MAD must be present in the guest's paravirtualized
P_Key table, and at least one of the (packet P_Key, guest P_Key) must
be a full-membership P_Key.

However, if everyone involved has only limited membership in the
default P_Key, then packets sent by full-member remote hosts arrive at
the PPF but are not passed on to the VFs with the current P_Key1 check.

Fix this as follows:

1. Don't care if P_Key received over wire is full or not. If it
   successfully passed HW checks on the real QP1, then simply pass it
   to guest regardless of whether the guest has full or limited
   membership in its P_Key table.

2. If the guest (including paravirtualized master) has both full and
   limited P_Key forms in its table, preferentially pass the
   paravirtualized P_Key index of the full P_Key form in the tunnel
   header.

3. In the multicast join flow (mlx4/mcg.c), use the index for the
   default P_Key (wherever it is located) in replies generated from
   within the mcg module (previously, P_Key index 0 was used in all
   cases).

Signed-off-by: Jack Morgenstein 
Signed-off-by: Roland Dreier

IB/mlx4: Fix build error on platforms where UL is not 64 bits

2012-10-18T17:29:01+00:00

Line 110 uses UL as a compiler cast for the 0x constant, but it's not
large enough to hold a 64-bit value on a 32-bit arch.

Signed-off-by: Doug Ledford 

[ Use "-1" instead of "FFFFFFFFFFFFFFFFULL".  - Roland ]

Signed-off-by: Roland Dreier

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2012-10-10T10:52:19+00:00

Pull scsi target updates from Nicholas Bellinger:
 "Things have been calm for the most part with no new fabric drivers in
  flight for v3.7 (we're up to eight now !), so this update is primarily
  focused on addressing a few long-standing items within target-core and
  iscsi-target fabric code.

  The highlights include:

   - target: Simplify fabric sense data length handling (roland)
   - qla2xxx: Fix endianness of task management response code (roland)
   - target: fix truncation of mode data, support zero allocation length
     (paolo)
   - target: Properly support zero-length commands in normal processing
     path (paolo)
   - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT
     PDU (ronnie + nab)
   - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG
     demo-mode (ronnie + nab)
   - target/file: Re-enable optional fd_buffered_io=1 operation (nab +
     hch)
   - iscsi-target: Add MaxXmitDataSegmenthLength forr target ->
     initiator MDRSL declaration (nab)
   - target: Add target_submit_cmd_map_sgls for SGL fabric memory
     passthrough (nab + hch)
   - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch +
     nab)
   - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab
     + hch)

  The last series for adding a new target_submit_cmd_map_sgls() fabric
  caller (as requested by hch) that accepts pre-allocated SGL memory
  (using existing logic), along with converting tcm_loop + tcm_vhost has
  only been in -next for the last days, but has gotten enough review
  +testing and is clear enough a mechanical change that I think it's
  reasonable to merge for -rc1 code.

  Thanks again to everyone who contributed this round! Extra special
  thanks to Roland (PureStorage) for tracking down the qla2xxx target
  TMR response code endian issue, and to Paolo (Redhat) for resolving
  the long standing zero-length CDB issues within target-core between
  virtual and pSCSI backends."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
  iscsit: proper endianess conversions
  iscsit: use the itt_t abstract type
  iscsit: add missing endianess conversion in iscsit_check_inaddr_any
  iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
  iscsit: mark various functions static
  target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()
  target/usb-gadget: strlen() doesn't count the terminator
  target/usb-gadget: remove duplicate initialization
  tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add control CDB READ payload zero work-around
  tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
  iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
  iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength
  iscsi-target: Add MaxXmitDataSegmentLength connection recovery check
  iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength
  iscsi-target: Enable MaxXmitDataSegmentLength operation in login path
  iscsi-target: Add base MaxXmitDataSegmentLength code
  target/file: Re-enable optional fd_buffered_io=1 operation
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

2012-10-09T17:14:32+00:00

Pulled mainline in order to get the UAPI infrastructure already
merged before I pull in David Howells's UAPI trees for networking.

Signed-off-by: David S. Miller

mm: kill vma flag VM_RESERVED and mm->reserved_vm counter

2012-10-09T07:22:19+00:00

A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov 
Cc: Alexander Viro 
Cc: Carsten Otte 
Cc: Chris Metcalf 
Cc: Cyrill Gorcunov 
Cc: Eric Paris 
Cc: H. Peter Anvin 
Cc: Hugh Dickins 
Cc: Ingo Molnar 
Cc: James Morris 
Cc: Jason Baron 
Cc: Kentaro Takeda 
Cc: Matt Helsley 
Cc: Nick Piggin 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Robert Richter 
Cc: Suresh Siddha 
Cc: Tetsuo Handa 
Cc: Venkatesh Pallipadi 
Acked-by: Linus Torvalds 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-10-07T08:19:49+00:00

Pull infiniband changes from Roland Dreier:
  "Second batch of changes for the 3.7 merge window:
   - Late-breaking fix for IPoIB on mlx4 SR-IOV VFs.
   - Fix for IPoIB build breakage with CONFIG_INFINIBAND_IPOIB_CM=n (new
     netlink config changes are to blame).
   - Make sure retry count values are in range in RDMA CM.
   - A few nes hardware driver fixes and cleanups.
   - Have iSER initiator use >1 interrupt vectors if available."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: Check that retry count values are in range
  IB/iser: Add more RX CQs to scale out processing of SCSI responses
  RDMA/nes: Bump the version number of nes driver
  RDMA/nes: Remove unused module parameter "send_first"
  RDMA/nes: Remove unnecessary if-else statement
  RDMA/nes: Add missing break to switch.
  mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFs
  IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=n

infiniband: pass rdma_cm module to netlink_dump_start

2012-10-07T04:30:56+00:00

set netlink_dump_control.module to avoid panic.

Signed-off-by: Gao feng 
Cc: Roland Dreier 
Cc: Sean Hefty 
Signed-off-by: David S. Miller