linux-toradex.git/drivers/infiniband, branch v4.4.78

RDMA/uverbs: Check port number supplied by user verbs cmds

2017-07-15T09:57:47+00:00

commit 5ecce4c9b17bed4dc9cb58bfb10447307569b77b upstream.

The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive
the port number from user input as part of its attributes and assumes
it is valid. Down on the stack, that parameter is used to access kernel
data structures.  If the value is invalid, the kernel accesses memory
it should not.  To prevent this, verify the port number before using it.

BUG: KASAN: use-after-free in ib_uverbs_create_ah+0x6d5/0x7b0
Read of size 4 at addr ffff880018d67ab8 by task syz-executor/313

BUG: KASAN: slab-out-of-bounds in modify_qp.isra.4+0x19d0/0x1ef0
Read of size 4 at addr ffff88006c40ec58 by task syz-executor/819

Fixes: 67cdb40ca444 ("[IB] uverbs: Implement more commands")
Cc: Yevgeny Kliteynik 
Cc: Tziporet Koren 
Cc: Alex Polak 
Signed-off-by: Boris Pismenny 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

RDMA/qib,hfi1: Fix MR reference count leak on write with immediate

2017-06-14T11:16:27+00:00

commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream.

The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory
reference when a buffer cannot be allocated for returning the immediate
data.

The issue is that the rkey validation has already occurred and the RNR
nak fails to release the reference that was fruitlessly gotten.  The
the peer will send the identical single packet request when its RNR
timer pops.

The fix is to release the held reference prior to the rnr nak exit.
This is the only sequence the requires both rkey validation and the
buffer allocation on the same packet.

Cc: Stable  # 4.7+
Tested-by: Tadeusz Struk 
Reviewed-by: Dennis Dalessandro 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

infiniband: call ipv6 route lookup via the stub interface

2017-05-25T12:30:07+00:00

commit eea40b8f624f25cbc02d55f2d93203f60cee9341 upstream.

The infiniband address handle can be triggered to resolve an ipv6
address in response to MAD packets, regardless of the ipv6
module being disabled via the kernel command line argument.

That will cause a call into the ipv6 routing code, which is not
initialized, and a conseguent oops.

This commit addresses the above issue replacing the direct lookup
call with an indirect one via the ipv6 stub, which is properly
initialized according to the ipv6 status (e.g. if ipv6 is
disabled, the routing lookup fails gracefully)

Signed-off-by: Paolo Abeni 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/mlx4: Reduce SRIOV multicast cleanup warning message to debug level

2017-05-20T12:27:01+00:00

commit fb7a91746af18b2ebf596778b38a709cdbc488d3 upstream.

A warning message during SRIOV multicast cleanup should have actually been
a debug level message. The condition generating the warning does no harm
and can fill the message log.

In some cases, during testing, some tests were so intense as to swamp the
message log with these warning messages, causing a stall in the console
message log output task. This stall caused an NMI to be sent to all CPUs
(so that they all dumped their stacks into the message log).
Aside from the message flood causing an NMI, the tests all passed.

Once the message flood which caused the NMI is removed (by reducing the
warning message to debug level), the NMI no longer occurs.

Sample message log (console log) output illustrating the flood and
resultant NMI (snippets with comments and modified with ... instead
of hex digits, to satisfy checkpatch.pl):

  _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!...
 *** About 4000 almost identical lines in less than one second ***
  _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!...
 INFO: rcu_sched detected stalls on CPUs/tasks: { 17} (...)
 *** { 17} above indicates that CPU 17 was the one that stalled ***
 sending NMI to all CPUs:
 ...
 NMI backtrace for cpu 17
 CPU: 17 PID: 45909 Comm: kworker/17:2
 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 09/08/2013
 Workqueue: events fb_flashcursor
 task: ffff880478...... ti: ffff88064e...... task.ti: ffff88064e......
 RIP: 0010:[ffffffff81......]  [ffffffff81......] io_serial_in+0x15/0x20
 RSP: 0018:ffff88064e257cb0  EFLAGS: 00000002
 RAX: 0000000000...... RBX: ffffffff81...... RCX: 0000000000......
 RDX: 0000000000...... RSI: 0000000000...... RDI: ffffffff81......
 RBP: ffff88064e...... R08: ffffffff81...... R09: 0000000000......
 R10: 0000000000...... R11: ffff88064e...... R12: 0000000000......
 R13: 0000000000...... R14: ffffffff81...... R15: 0000000000......
 FS:  0000000000......(0000) GS:ffff8804af......(0000) knlGS:000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080......
 CR2: 00007f2a2f...... CR3: 0000000001...... CR4: 0000000000......
 DR0: 0000000000...... DR1: 0000000000...... DR2: 0000000000......
 DR3: 0000000000...... DR6: 00000000ff...... DR7: 0000000000......
 Stack:
 ffff88064e...... ffffffff81...... ffffffff81...... 0000000000......
 ffffffff81...... ffff88064e...... ffffffff81...... ffffffff81......
 ffffffff81...... ffff88064e...... ffffffff81...... 0000000000......
 Call Trace:
[] wait_for_xmitr+0x3b/0xa0
[] serial8250_console_putchar+0x1c/0x30
[] ? serial8250_console_write+0x140/0x140
[] uart_console_write+0x3a/0x80
[] serial8250_console_write+0xae/0x140
[] call_console_drivers.constprop.15+0x91/0xf0
[] console_unlock+0x3bf/0x400
[] fb_flashcursor+0x5d/0x140
[] ? bit_clear+0x120/0x120
[] process_one_work+0x17b/0x470
[] worker_thread+0x11b/0x400
[] ? rescuer_thread+0x400/0x400
[] kthread+0xcf/0xe0
[] ? kthread_create_on_node+0x140/0x140
[] ret_from_fork+0x58/0x90
[] ? kthread_create_on_node+0x140/0x140
Code: 48 89 e5 d3 e6 48 63 f6 48 03 77 10 8b 06 5d c3 66 0f 1f 44 00 00 66 66 66 6

As indicated in the stack trace above, the console output task got swamped.

Fixes: b9c5d6a64358 ("IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/mlx4: Fix ib device initialization error flow

2017-05-20T12:27:00+00:00

commit 99e68909d5aba1861897fe7afc3306c3c81b6de0 upstream.

In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs.

However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not
called to free the allocated EQs.

Fixes: e605b743f33d ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/IPoIB: ibX: failed to create mcg debug file

2017-05-20T12:27:00+00:00

commit 771a52584096c45e4565e8aabb596eece9d73d61 upstream.

When udev renames the netdev devices, ipoib debugfs entries does not
get renamed. As a result, if subsequent probe of ipoib device reuse the
name then creating a debugfs entry for the new device would fail.

Also, moved ipoib_create_debug_files and ipoib_delete_debug_files as part
of ipoib event handling in order to avoid any race condition between these.

Fixes: 1732b0ef3b3a ([IPoIB] add path record information in debugfs)
Signed-off-by: Vijay Kumar 
Signed-off-by: Shamir Rabinovitch 
Reviewed-by: Mark Bloch 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/core: Fix sysfs registration error flow

2017-05-20T12:27:00+00:00

commit b312be3d87e4c80872cbea869e569175c5eb0f9a upstream.

The kernel commit cited below restructured ib device management
so that the device kobject is initialized in ib_alloc_device.

As part of the restructuring, the kobject is now initialized in
procedure ib_alloc_device, and is later added to the device hierarchy
in the ib_register_device call stack, in procedure
ib_device_register_sysfs (which calls device_add).

However, in the ib_device_register_sysfs error flow, if an error
occurs following the call to device_add, the cleanup procedure
device_unregister is called. This call results in the device object
being deleted -- which results in various use-after-free crashes.

The correct cleanup call is device_del -- which undoes device_add
without deleting the device object.

The device object will then (correctly) be deleted in the
ib_register_device caller's error cleanup flow, when the caller invokes
ib_dealloc_device.

Fixes: 55aeed06544f6 ("IB/core: Make ib_alloc_device init the kobject")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/qib: rename BITS_PER_PAGE to RVT_BITS_PER_PAGE

2017-05-08T05:46:02+00:00

We get this build warning on arm64

drivers/infiniband/hw/qib/qib_qp.c:44:0: error: "BITS_PER_PAGE" redefined [-Werror]
 #define BITS_PER_PAGE           (PAGE_SIZE*BITS_PER_BYTE)

This is fixed upstream in commit 898fa52b4ac3 ("IB/qib: Remove qpn, qp tables and
related variables from qib"), which does a lot of other things as well.

Instead, I just backport the rename of the local BITS_PER_PAGE definition to
RVT_BITS_PER_PAGE.

The driver first showed up in linux-2.6.35, and the fixup should still apply
to that. The upstream fix went into v4.6, so we could apply this workaround
to both 3.18 and 4.4.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

IB/srp: Fix race conditions related to task management

2017-03-15T01:57:13+00:00

commit 0a6fdbdeb1c25e31763c1fb333fa2723a7d2aba6 upstream.

Avoid that srp_process_rsp() overwrites the status information
in ch if the SRP target response timed out and processing of
another task management function has already started. Avoid that
issuing multiple task management functions concurrently triggers
list corruption. This patch prevents that the following stack
trace appears in the system log:

WARNING: CPU: 8 PID: 9269 at lib/list_debug.c:52 __list_del_entry_valid+0xbc/0xc0
list_del corruption. prev->next should be ffffc90004bb7b00, but was ffff8804052ecc68
CPU: 8 PID: 9269 Comm: sg_reset Tainted: G        W       4.10.0-rc7-dbg+ #3
Call Trace:
 dump_stack+0x68/0x93
 __warn+0xc6/0xe0
 warn_slowpath_fmt+0x4a/0x50
 __list_del_entry_valid+0xbc/0xc0
 wait_for_completion_timeout+0x12e/0x170
 srp_send_tsk_mgmt+0x1ef/0x2d0 [ib_srp]
 srp_reset_device+0x5b/0x110 [ib_srp]
 scsi_ioctl_reset+0x1c7/0x290
 scsi_ioctl+0x12a/0x420
 sd_ioctl+0x9d/0x100
 blkdev_ioctl+0x51e/0x9f0
 block_ioctl+0x38/0x40
 do_vfs_ioctl+0x8f/0x700
 SyS_ioctl+0x3c/0x70
 entry_SYSCALL_64_fastpath+0x18/0xad

Signed-off-by: Bart Van Assche 
Cc: Israel Rukshin 
Cc: Max Gurtovoy 
Cc: Laurence Oberman 
Cc: Steve Feeley 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/srp: Avoid that duplicate responses trigger a kernel bug

2017-03-15T01:57:13+00:00

commit 6cb72bc1b40bb2c1750ee7a5ebade93bed49a5fb upstream.

After srp_process_rsp() returns there is a short time during which
the scsi_host_find_tag() call will return a pointer to the SCSI
command that is being completed. If during that time a duplicate
response is received, avoid that the following call stack appears:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: srp_recv_done+0x450/0x6b0 [ib_srp]
Oops: 0000 [#1] SMP
CPU: 10 PID: 0 Comm: swapper/10 Not tainted 4.10.0-rc7-dbg+ #1
Call Trace:
 
 __ib_process_cq+0x4b/0xd0 [ib_core]
 ib_poll_handler+0x1d/0x70 [ib_core]
 irq_poll_softirq+0xba/0x120
 __do_softirq+0xba/0x4c0
 irq_exit+0xbe/0xd0
 smp_apic_timer_interrupt+0x38/0x50
 apic_timer_interrupt+0x90/0xa0
 
RIP: srp_recv_done+0x450/0x6b0 [ib_srp] RSP: ffff88046f483e20

Signed-off-by: Bart Van Assche 
Cc: Israel Rukshin 
Cc: Max Gurtovoy 
Cc: Laurence Oberman 
Cc: Steve Feeley 
Reviewed-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman