linux-toradex.git/drivers/infiniband, branch v4.9.56

IB/qib: fix false-postive maybe-uninitialized warning

2017-10-08T08:26:11+00:00

commit f6aafac184a3e46e919769dd4faa8bf0dc436534 upstream.

aarch64-linux-gcc-7 complains about code it doesn't fully understand:

drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change':
include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code is right, and despite trying hard, I could not come up with a version
that I liked better than just adding a fake initialization here to shut up the
warning.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann 
Acked-by: Ira Weiny 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/ipoib: Replace list_del of the neigh->list with list_del_init

2017-10-08T08:26:05+00:00

[ Upstream commit c586071d1dc8227a7182179b8e50ee92cc43f6d2 ]

In order to resolve a situation where a few process delete
the same list element in sequence and cause panic, list_del
is replaced with list_del_init. In this case if the first
process that calls list_del releases the lock before acquiring
it again, other processes who can acquire the lock will call
list_del_init.

Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup")
Signed-off-by: Feras Daoud 
Signed-off-by: Erez Shitrit 
Reviewed-by: Alex Vesker 
Signed-off-by: Leon Romanovsky 
Reviewed-by: Yuval Shaia 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

IB/ipoib: rtnl_unlock can not come after free_netdev

2017-10-08T08:26:05+00:00

[ Upstream commit 89a3987ab7a923c047c6dec008e60ad6f41fac22 ]

The ipoib_vlan_add function calls rtnl_unlock after free_netdev,
rtnl_unlock not only releases the lock, but also calls netdev_run_todo.
The latter function browses the net_todo_list array and completes the
unregistration of all its net_device instances. If we call free_netdev
before rtnl_unlock, then netdev_run_todo call over the freed device causes
panic.
To fix, move rtnl_unlock call before free_netdev call.

Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Cc: Or Gerlitz 
Signed-off-by: Feras Daoud 
Signed-off-by: Erez Shitrit 
Reviewed-by: Yuval Shaia 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

IB/ipoib: Fix deadlock over vlan_mutex

2017-10-08T08:26:05+00:00

[ Upstream commit 1c3098cdb05207e740715857df7b0998e372f527 ]

This patch fixes Deadlock while executing ipoib_vlan_delete.

The function takes the vlan_rwsem semaphore and calls
unregister_netdevice. The later function calls
ipoib_mcast_stop_thread that cause workqueue flush.

When the queue has one of the ipoib_ib_dev_flush_xxx events,
a deadlock occur because these events also tries to catch the
same vlan_rwsem semaphore.

To fix, unregister_netdevice should be called after releasing
the semaphore.

Fixes: cbbe1efa4972 ("IPoIB: Fix deadlock between ipoib_open() and child interface create")
Signed-off-by: Feras Daoud 
Signed-off-by: Erez Shitrit 
Reviewed-by: Alex Vesker 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

IB/rxe: Fix a MR reference leak in check_rkey()

2017-10-08T08:26:04+00:00

[ Upstream commit b3a459961014b14c267544c327db033669493295 ]

Avoid that calling check_rkey() for mem->state == RXE_MEM_STATE_FREE
triggers an MR reference leak.

Signed-off-by: Bart Van Assche 
Reviewed-by: Andrew Boyer 
Cc: Moni Shoua 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

IB/rxe: Add a runtime check in alloc_index()

2017-10-08T08:26:04+00:00

[ Upstream commit 642c7cbcaf2ffc1e27f67eda3dc47347ac5aff37 ]

Since index values equal to or above 'range' can trigger memory
corruption, complain if index >= range.

Signed-off-by: Bart Van Assche 
Reviewed-by: Andrew Boyer 
Cc: Moni Shoua 
Signed-off-by: Doug Ledford 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iw_cxgb4: put ep reference in pass_accept_req()

2017-10-05T07:44:02+00:00

commit 3d318605f5e32ff44fb290d9b67573b34213c4c8 upstream.

The listening endpoint should always be dereferenced at the end of
pass_accept_req().

Fixes: f86fac79afec ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints")

Signed-off-by: Steve Wise 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

iw_cxgb4: remove the stid on listen create failure

2017-10-05T07:44:02+00:00

commit 8b1bbf36b7452c4acb20e91948eaa5e225ea6978 upstream.

If a listen create fails, then the server tid (stid) is incorrectly left
in the stid idr table, which can cause a touch-after-free if the stid
is looked up and the already freed endpoint is touched.  So make sure
and remove it in the error path.

Signed-off-by: Steve Wise 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/addr: Fix setting source address in addr6_resolve()

2017-09-27T12:39:18+00:00

commit 79e25959403e6a79552db28a87abed34de32a1df upstream.

Commit eea40b8f624f ("infiniband: call ipv6 route lookup via the stub
interface") introduced a regression in address resolution when connecting
to IPv6 destination addresses.  The old code called ip6_route_output(),
while the new code calls ipv6_stub->ipv6_dst_lookup().  The two are almost
the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr()
if the source address is in6addr_any.

This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds,
and so we never copy the source address out.  This ends up causing
rdma_resolve_addr() to fail, because without a resolved source address,
cma_acquire_dev() will fail to find an RDMA device to use.  For me, this
causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail.

Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original
source address passed into addr6_resolve().  We can drop our call to
ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work.

Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface")
Signed-off-by: Roland Dreier 
Acked-by: Paolo Abeni 
Signed-off-by: Doug Ledford 
Signed-off-by: Raju Rangoju 
Signed-off-by: Greg Kroah-Hartman

IB/{qib, hfi1}: Avoid flow control testing for RDMA write operation

2017-09-27T12:39:18+00:00

commit 5b0ef650bd0f820e922fcc42f1985d4621ae19cf upstream.

Section 9.7.7.2.5 of the 1.3 IBTA spec clearly says that receive
credits should never apply to RDMA write.

qib and hfi1 were doing that.  The following situation will result
in a QP hang:
- A prior SEND or RDMA_WRITE with immmediate consumed the last
  credit for a QP using RC receive buffer credits
- The prior op is acked so there are no more acks
- The peer ULP fails to post receive for some reason
- An RDMA write sees that the credits are exhausted and waits
- The peer ULP posts receive buffers
- The ULP posts a send or RDMA write that will be hung

The fix is to avoid the credit test for the RDMA write operation.

Reviewed-by: Kaike Wan 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman