Pull input subsystem updates from Dmitry Torokhov: "You will get the following new drivers: - Qualcomm PM8941 power key drver - ChipOne icn8318 touchscreen controller driver - Broadcom iProc touchscreen and keypad drivers - Semtech SX8654 I2C touchscreen controller driver ALPS driver now supports newer SS4 devices; Elantech got a fix that should make it work on some ASUS laptops; and a slew of other enhancements and random fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: alps - non interleaved V2 dualpoint has separate stick button bits Input: alps - fix touchpad buttons getting stuck when used with trackpoint Input: atkbd - document "no new force-release quirks" policy Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static Input: ALPS - V7 devices can report 5-finger taps Input: ALPS - add support for SS4 touchpad devices Input: ALPS - refactor alps_set_abs_params_mt() Input: elantech - fix absolute mode setting on some ASUS laptops Input: atmel_mxt_ts - split out touchpad initialisation logic Input: atmel_mxt_ts - implement support for T100 touch object Input: cros_ec_keyb - fix clearing keyboard state on wakeup Input: gscps2 - drop pci_ids dependency Input: synaptics - allocate 3 slots to keep stability in image sensors Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots"" Input: MT - make slot assignment work for overcovered solutions mfd: tc3589x: enforce device-tree only mode Input: tc3589x - localize platform data Input: tsc2007 - Convert msecs to jiffies only once Input: edt-ft5x06 - remove EV_SYN event report Input: edt-ft5x06 - allow to setting the maximum axes value through the DT ...
The case occurred recently with a touchscreen using twice a slot during a single EV_SYN event: E: 0.288415 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 0.296207 0003 0039 -001 # EV_ABS / ABS_MT_TRACKING_ID -1 E: 0.296207 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 0.296207 0003 0035 0908 # EV_ABS / ABS_MT_POSITION_X 908 E: 0.296207 0003 0036 1062 # EV_ABS / ABS_MT_POSITION_Y 1062 E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 0.296207 0003 0039 8787 # EV_ABS / ABS_MT_TRACKING_ID 8787 E: 0.296207 0003 0035 1566 # EV_ABS / ABS_MT_POSITION_X 1566 E: 0.296207 0003 0036 0861 # EV_ABS / ABS_MT_POSITION_Y 861 E: 0.296207 0003 0000 0908 # EV_ABS / ABS_X 908 E: 0.296207 0003 0001 1062 # EV_ABS / ABS_Y 1062 E: 0.296207 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- This occurred because while having already slots 0 and 1 assigned, the touchscreen sent: 0.293377 Tip Switch: 0 | Contact Id: 0 | X: 539 | Y: 1960 | Contact Count: 3 0.294783 Tip Switch: 1 | Contact Id: 1 | X: 908 | Y: 1062 | Contact Count: 0 0.296187 Tip Switch: 1 | Contact Id: 2 | X: 1566 | Y: 861 | Contact Count: 0 Slot 0 is released correclty, but when we look for Contact ID 2, the slot 0 is then picked up again because it is marked as inactive (trackingID < 0). This is wrong, and we should not reuse a slot in the same frame. The test should also check for input_mt_is_used(). In addition, we need to initialize mt->frame to an other value than 0. With mt->frame being 0, all slots are tags as currently used, and so input_mt_get_slot_by_key() would return -1 for all requests. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88903 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The recent inclusion of a deassignment cost in the slot assignment algorithm did not properly account for the corner cases where the solutions are overcovered. This change makes sure the resulting assignment is unique, allocating new slots when necessary. Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some devices are not fast enough to differentiate between a fast-moving contact and a new contact. This problem cannot be fully resolved because information is truly missing, but it is possible to safe-guard against obvious mistakes by restricting movement with a maximum displacement. The new problem formulation for dmax > 0 cannot benefit from the speedup for positive definite matrices, but since the convergence is faster, the result is about the same. For a handful of contacts, the latency difference is truly negligible. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit f8ec894945e7d205ce62be59e55e72c4304e4739 allowed external callers
use slot dropping logic, unfortunately it also broke external users of
input_mt_is_used() as we stopped incrementing frame count unless input
device was set up to automatically drop unused slots.
Fixes: f8ec894945e7d ("Input: MT - make slot cleanup callable outside
mt_sync_frame()")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=83081
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some semi-mt drivers use the slots in a manual way, but may still want to call parts of the frame synchronization logic. This patch makes input_mt_drop_unused callable from those drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
"Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2
touchpad and a big update to ALPS driver from Kevin Cernekee that adds
support for "Rushmore" touchpads and paves way for adding support for
"Dolphin" touchpads.
There is also a new input driver for Goldfish emulator and also
Android keyreset driver was folded into SysRq code.
A few more drivers were updated with device tree bindings and others
got some small cleanups and fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
Input: cyttsp-spi - remove duplicate MODULE_ALIAS()
Input: tsc2005 - add MODULE_ALIAS
Input: tegra-kbc - require CONFIG_OF, remove platform data
Input: synaptics - initialize pointer emulation usage
Input: MT - do not apply filtering on emulated events
Input: bma150 - make some defines public and fix some comments
Input: bma150 - fix checking pm_runtime_get_sync() return value
Input: ALPS - enable trackstick on Rushmore touchpads
Input: ALPS - add support for "Rushmore" touchpads
Input: ALPS - make the V3 packet field decoder "pluggable"
Input: ALPS - move pixel and bitmap info into alps_data struct
Input: ALPS - fix command mode check
Input: ALPS - rework detection of Pinnacle AGx touchpads
Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()
Input: ALPS - use function pointers for different protocol handlers
Input: ALPS - rework detection sequence
Input: ALPS - introduce helper function for repeated commands
Input: ALPS - move alps_get_model() down below hw_init code
Input: ALPS - copy "model" info into alps_data struct
Input: ALPS - document the alps.h data structures
...
The pointer emulation events are derived from contact values that have already been filtered, so send the emulated events as is. Reported-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>