linux-toradex.git/drivers/input/misc/Makefile, branch v5.17-rc4

Input: remove dead CSR Prima2 PWRC driver

2021-08-30T22:55:19+00:00

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code.
Remove this dead driver.

Signed-off-by: Lukas Bulwahn 
Acked-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov

Input: ixp4xx-beeper - delete driver

2021-07-19T21:32:10+00:00

The NSLU2 has been migrated to devicetree and there we use
the gpio-beeper.c driver instead, the boardfile will be deleted
for kernel v5.15 so drop this custom and now unneeded driver.

Signed-off-by: Linus Walleij 
Link: https://lore.kernel.org/r/20210714115028.916360-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-05-07T06:37:55+00:00

Pull input updates from Dmitry Torokhov:

 - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series,
   and MStar MSG2638

 - a new driver for Azoteq IQS626A proximity and touch controller

 - addition of Amazon Game Controller to the list of devices handled
   by the xpad driver

 - Elan touchscreen driver will avoid binding to devices described as
   I2CHID compatible in ACPI tables

 - various driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits)
  Input: xpad - add support for Amazon Game Controller
  Input: ili210x - add missing negation for touch indication on ili210x
  MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT
  Input: add driver for the Hycon HY46XX touchpanel series
  dt-bindings: touchscreen: Add HY46XX bindings
  dt-bindings: Add Hycon Technology vendor prefix
  Input: cyttsp - flag the device properly
  Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR
  Input: cyttsp - drop the phys path
  Input: cyttsp - reduce reset pulse timings
  Input: cyttsp - error message on boot mode exit error
  Input: apbps2 - remove useless variable
  Input: mms114 - support MMS136
  Input: mms114 - convert bindings to YAML and extend
  Input: Add support for ILITEK Lego Series
  dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings
  Input: add MStar MSG2638 touchscreen driver
  dt-bindings: input/touchscreen: add bindings for msg2638
  Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state
  Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices
  ...

Input: Add support for Azoteq IQS626A

2021-03-25T18:14:10+00:00

This patch adds support for the Azoteq IQS626A capacitive touch
controller.

Signed-off-by: Jeff LaBundy 
Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com
Signed-off-by: Dmitry Torokhov

input: atc260x: Add onkey driver for ATC260x PMICs

2021-03-10T11:10:30+00:00

The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configured to force a system reset on a long key-press with an
adjustable duration.

The currently supported chip variants are ATC2603C and ATC2609A.

Signed-off-by: Cristian Ciocaltea 
Acked-by: Dmitry Torokhov 
Signed-off-by: Lee Jones

Input: new da7280 haptic driver

2020-12-11T08:21:27+00:00

Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the device.

Signed-off-by: Roy Im 
Reviewed-by: Jes Sorensen .
Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com
Signed-off-by: Dmitry Torokhov

Input: add driver for power button on Dell Wyse 3020

2020-12-10T01:47:39+00:00

This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.

The Embedded Controller's SPI interface is actually capable sending and
receiving the PS/2 keyboard and mouse protocol data, which looks like
a good fit for a serio driver. Howerver, I don't know of any machines where
this is actually used.

My board only has a single power button and no way to connect an actual
keyboard or a mouse. Using the atkbd driver with serio would be an overkill
and would be inconvenient for the userspace. Therefore this driver
registers an input device that is only capable of reporting the power
button presses and releases.

Signed-off-by: Lubomir Rintel 
Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk
Signed-off-by: Dmitry Torokhov

Input: add support for Azoteq IQS269A

2020-05-18T02:16:36+00:00

This patch adds support for the Azoteq IQS269A capacitive touch
controller.

Signed-off-by: Jeff LaBundy 
Link: https://lore.kernel.org/r/1588352982-5117-2-git-send-email-jeff@labundy.com
Signed-off-by: Dmitry Torokhov

Input: remove msm-vibrator driver

2020-05-13T17:34:57+00:00

The address referenced by this driver is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more generic
solution can be used instead.  No one is currently using driver so this
won't affect any users.

Signed-off-by: Brian Masney 
Link: https://lore.kernel.org/r/20200513013140.69935-3-masneyb@onstation.org
Signed-off-by: Dmitry Torokhov

Input: delete unused GP2AP002A00F driver

2020-04-19T16:57:29+00:00

There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in
drivers/iio/light/gp2ap002.c.

Delete this driver, it is unused in the kernel tree and new users can make
use of the IIO driver.

Signed-off-by: Linus Walleij 
Link: https://lore.kernel.org/r/20200417203059.8151-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov