linux-toradex.git/drivers/input/misc, branch colibri_vf Linux kernel for Apalis and Colibri modules ENGR00174212 isl29023: fix build error of isl29023 light sensor 2012-02-10T08:49:45+00:00 Xinyu Chen b03824@freescale.com 2012-02-10T07:55:59+00:00 5dc82fc25041cedfe1a656ec2e8589e5adfed542 the platform data and irq set type interface is changed. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com> 
the platform data and irq set type interface is changed.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
ENGR00140391 ISL29023:Keep int thresholds in interrupt handler 2012-01-09T12:07:58+00:00 Liu Ying Ying.Liu@freescale.com 2011-03-08T06:59:21+00:00 34496f0b27e6aa4aab2fff266b45b48d38638a45 We used to set the interrupt thresholds to the measure range of the light sensor in the interrupt handler, this potentially makes user poll on the input event and never be waken up. This patch keeps the interrupt thresholds in the interrupt handler and is tested on MX53 SMD. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> 
We used to set the interrupt thresholds to the measure range
of the light sensor in the interrupt handler, this potentially
makes user poll on the input event and never be waken up.

This patch keeps the interrupt thresholds in the interrupt
handler and is tested on MX53 SMD.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
ENGR00139383-2 Add ISL29023 light sensor support 2012-01-09T12:07:57+00:00 Liu Ying Ying.Liu@freescale.com 2011-02-22T09:11:30+00:00 c772defabfa3e5a79354a9803438874181626fbd This patch adds ISL29023 light sensor support. Users may control the light sensor work at different modes/ranges/resolutions or read the lux value via sysfs. A power state node is also created in sysfs. If the light sensor works at ALS once mode, users need to power down/power up the sensor before read the lux value again. Currently, IR(Infra Red) mode is not supported. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> 
This patch adds ISL29023 light sensor support.
Users may control the light sensor work at
different modes/ranges/resolutions or read
the lux value via sysfs.
A power state node is also created in sysfs.
If the light sensor works at ALS once mode,
users need to power down/power up the sensor
before read the lux value again.
Currently, IR(Infra Red) mode is not supported.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
ENGR00141391-2 PMIC: porting da9053 to i.mx platform 2012-01-09T11:53:52+00:00 Zhou Jingyu b02241@freescale.com 2011-03-02T08:28:25+00:00 e46c868419024af419283854a62a2ea525a33304 Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com> 
Fix da9053 backlight Kconfig error
porting da9052 regulator driver

Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>
ENGR00141391-1 PMIC: Add DA9053 source code from Dialog 2012-01-09T11:53:51+00:00 Zhou Jingyu b02241@freescale.com 2011-03-02T07:36:28+00:00 3b91b5ac920ba4e716afb8618ee10d6fb7711852 Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com> 
Add DA9053 original source code

Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>
input: pmic8xxx-pwrkey: Do not use mfd_get_data() 2011-07-05T08:38:43+00:00 Samuel Ortiz sameo@linux.intel.com 2011-06-08T09:06:30+00:00 63ef1124f1cb07836f232b8eaed1ae4c73899643 mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
input: Add support for Qualcomm PMIC8XXX power key 2011-05-26T17:45:54+00:00 Trilok Soni tsoni@codeaurora.org 2011-05-13T09:47:51+00:00 92d57a73e41047bff7d0812e06f893567876d455 Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Add support for PMIC8XXX power key driven over dedicated
KYPD_PWR_N pin.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: Use mfd cell platform_data for twl4030 codec cells platform bits 2011-05-26T17:45:09+00:00 Samuel Ortiz sameo@linux.intel.com 2011-04-06T13:57:17+00:00 a4579ad2bb6557834ebfafc8d2942891516fb4ad With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.

Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Input: ad714x - fix captouch wheel option algorithm 2011-05-17T06:20:17+00:00 Michael Hennerich michael.hennerich@analog.com 2011-05-17T06:17:40+00:00 f1e430e6369f5edac552d99bff15369ef8c6bbd2 As reported by Jean-Francois Dagenais, the wheel algorithm caused a divide by zero exception due to missing variable pre-initialization. In fact it turned out that the whole algorithm had several problems. It is therefore replaced with something that is known working. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 
As reported by Jean-Francois Dagenais, the wheel algorithm caused a
divide by zero exception due to missing variable pre-initialization.
In fact it turned out that the whole algorithm had several problems.
It is therefore replaced with something that is known working.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Input: ad714x - allow platform code to specify irqflags 2011-05-17T06:20:13+00:00 Michael Hennerich michael.hennerich@analog.com 2011-05-17T06:17:34+00:00 3532cb0ca2774b05e3c660f536ba3d1b38061fc9 Add option to specify irqflags in platfrom data. Also update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 
Add option to specify irqflags in platfrom data.
Also update copyright notice.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>