Pull input updates from Dmitry Torokhov:

 - a brand new driver for touchpads and touchbars in newer Apple devices

 - support for Berlin-A series in goodix-berlin touchscreen driver

 - improvements to matrix_keypad driver to better handle GPIOs toggling

 - assorted small cleanups in other input drivers

* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix_berlin - add support for Berlin-A series
  dt-bindings: input: goodix,gt9916: Document gt9897 compatible
  dt-bindings: input: matrix_keypad - add wakeup-source property
  dt-bindings: input: matrix_keypad - add missing property
  Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
  Input: synaptics - hide unused smbus_pnp_ids[] array
  Input: apple_z2 - fix potential confusion in Kconfig
  Input: matrix_keypad - use fsleep for delays after activating columns
  Input: matrix_keypad - add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: convert to YAML
  dt-bindings: input: Correct indentation and style in DTS example
  MAINTAINERS: Add entries for Apple Z2 touchscreen driver
  Input: apple_z2 - add a driver for Apple Z2 touchscreens
  dt-bindings: input: touchscreen: Add Z2 controller
  Input: Switch to use hrtimer_setup()
  Input: drop vb2_ops_wait_prepare/finish

Prepare input updates for 6.15 merge window.

Pull MFD updates from Lee Jones:
 "Maxim MAX77705:
   - Added core MFD driver.
   - Added charger driver.
   - Added devicetree bindings for the charger and MFD core.
   - Added Haptic controller support via the input subsystem.
   - Added LED support.
   - Added support to simple-mfd-i2c for fuel gauge and hwmon.

  Samsung S2MPU05 (Exynos7870 PMIC):
   - Added core MFD support.
   - Added Regulator support for 21 LDOs and 5 BUCKs.
   - Added devicetree bindings for regulators and the PMIC core.

  TI TPS65215 & TPS65214:
   - Added support to the existing TPS65219 driver.
   - Added devicetree bindings.

  STMicroelectronics STM32MP25:
   - Added support to the stm32-timers MFD driver.
   - Added devicetree bindings.

  Congatec Board Controller (CGBC):
   - Added HWMON support for internal sensors.
   - Added support for the conga-SA8 module.

  Microchip LAN969X:
   - Enabled the at91-usart MFD driver for this architecture.

  MediaTek MT6359:
   - Added mfd_cell for mt6359-accdet to allow its driver to probe.

  Other misc driver updates:
   - AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
     for temperature sensor configuration.
   - SM501: Switched to using BIT() macro to mitigate potential integer
     overflows in GPIO functions.
   - ENE KB3930: Added a NULL pointer check for off_gpios during probe
     to prevent potential dereference.
   - SYSCON: Added a check for invalid resource size to prevent issues
     from DT misconfiguration.
   - CGBC: Corrected signedness issues in cgbc_session_request
   - intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
     explicit assignment to REGCACHE_NONE.
   - ipaq-micro / tps65010: Switched to using str_enable_disable()
     helpers for clarity and potential size reduction.
   - upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
   - max8997: Removed unused max8997_irq_exit() function, using devm_*
     helpers instead.
   - lp3943: Dropped unused #include <linux/pwm.h> from the header file.
   - db8500-prcmu: Removed needless return statements in void APIs.
   - qnap-mcu: Replaced commas with semicolons between expressions for
     correctness.
   - STA2X11: Removed the core MFD driver as the underlying platform
     support was removed.
   - EZX-PCAP: Removed the unused pcap_adc_sync function.
   - PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
     gpio, irq) as the underlying s3c24xx platform support was removed.

  Devicetree updates:
   - Converted fsl,mcu-mpc8349emitx binding to YAML
   - Added qcom,msm8937-tcsr compatible
   - Added microchip,sama7d65-flexcom compatible
   - Added rockchip,rk3528-qos syscon compatible
   - Added airoha,en7581-pbus-csr syscon compatible
   - Added microchip,sama7d65-ddr3phy syscon compatible
   - Added microchip,sama7d65-sfrbu syscon compatible"

* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: cgbc-core: Add support for conga-SA8
  dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
  dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
  mfd: cgbc: Add support for HWMON
  dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
  mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
  mfd: pcf50633: Remove remaining PCF50633 support
  mfd: pcf50633: Remove unused platform IRQ code
  mfd: pcF50633-gpio: Remove unused driver
  mfd: pcf50633-adc: Remove unused driver
  mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
  mfd: mt6397-core: Add mfd_cell for mt6359-accdet
  dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
  mfd: ezx-pcap: Remove unused pcap_adc_sync
  mfd: db8500-prcmu: Remove needless return in three void APIs
  mfd: Remove STA2x11 core driver
  mfd: max77620: Allow building as a module
  mfd: ene-kb3930: Fix a potential NULL pointer dereference
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
  ...

Pull input updates from Dmitry Torokhov:

 - several new device IDs added to xpad game controller driver

 - support for imagis IST3038H variant of chip added to imagis touch
   controller driver

 - a fix for GPIO allocation for ads7846 touch controller driver

 - a fix for iqs7222 driver to properly support status register

 - a fix for goodix-berlin touch controller driver to use the right name
   for the regulator

 - more i8042 quirks to better handle several old Clevo devices.

* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  MAINTAINERS: Remove myself from the goodix touchscreen maintainers
  Input: iqs7222 - preserve system status register
  Input: i8042 - swap old quirk combination with new quirk for more devices
  Input: i8042 - swap old quirk combination with new quirk for several devices
  Input: i8042 - add required quirks for missing old boardnames
  Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
  Input: xpad - rename QH controller to Legion Go S
  Input: xpad - add support for TECNO Pocket Go
  Input: xpad - add support for ZOTAC Gaming Zone
  Input: goodix-berlin - fix vddio regulator references
  Input: goodix-berlin - fix comment referencing wrong regulator
  Input: imagis - add support for imagis IST3038H
  dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
  Input: xpad - add multiple supported devices
  Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
  Input: ads7846 - fix gpiod allocation
  Input: wdt87xx_i2c - fix compiler warning

Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).

In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.

Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.

Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.

As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.

Fixes: 2e70ef525b73 ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with the mainline.

Since 'sw_debounce_end_time' of 'struct pm8941_pwrkey' is of type
'ktime_t', use 'ktime_to_us()' to print the value in microseconds
as it is announced in a call to 'dev_dbg()'. Compile tested only.

Fixes: 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press debouncing support")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20250216170336.861025-1-dmantipov@yandex.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Pull x86 platform driver updates from Ilpo Järvinen:
 "acer-wmi:
   - Add support for PH14-51, PH16-72, and Nitro AN515-58
   - Add proper hwmon support
   - Improve error handling when reading "gaming system info"
   - Replace direct EC reads for the current platform profile with WMI
     calls to handle EC address variations
   - Replace custom platform_profile cycling with the generic one

  ACPI:
   - platform_profile: Major refactoring and improvements
   - Support registering multiple platform_profile handlers concurrently
     to avoid the need to quirk which handler takes precedence
   - Support reporting "custom" profile for cases where the current
     profile is ambiguous or when settings tweaks are done outside the
     pre-defined profile
   - Abstract and layer platform_profile API better using the class_dev
     and drvdata
   - Various minor improvements
   - Add Documentation and kerneldoc

  amd/hsmp:
   - Add support for HSMP protocol v7

  amd/pmc:
   - Support AMD 1Ah family 70h
   - Support STB with Ryzen desktop SoCs

  amd/pmf:
   - Support Custom BIOS inputs for PMF TA
   - Support passing SRA sensor data from AMD SFH (HID) to PMF TA

  dell-smo8800:
   - Move SMO88xx quirk away from the generic i2c-i801 driver
   - Add accelerometer support for Dell Latitude E6330/E6430 and XPS
     9550
   - Support probing accelerometer for models yet to be listed in the
     DMI mapping table because ACPI lacks i2c-address for the
     accelerometer (behind a module parameter because probing might be
     dangerous)

  HID:
   - amd_sfh: Add support for exporting SRA sensor data

  hp-wmi:
   - Add fan and thermal support for Victus 16-s1000

  input:
   - Add key for phone linking
   - i8042: Add context for the i8042 filter to enable cleaning up the
     filter related global variables from pdx86 drivers

  lenovo-wmi-camera:
   - Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS

  mellanox mlxbf-pmc:
   - Add support for monitoring cycle count
   - Add Documentation

  thinkpad_acpi:
   - Add support for phone link key

  tools/power/x86/intel-speed-select:
   - Fix Turbo Ratio Limit restore

  x86-android-tables:
   - Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver

  And miscellaneous cleanups / refactoring / improvements"

* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
  platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
  platform/x86: acer-wmi: Ignore AC events
  platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
  platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
  platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
  platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
  ACPI: platform_profile: Add a prefix to log messages
  ACPI: platform_profile: Add documentation
  ACPI: platform_profile: Clean platform_profile_handler
  ACPI: platform_profile: Move platform_profile_handler
  ACPI: platform_profile: Remove platform_profile_handler from exported symbols
  platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
  platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
  platform/x86: hp-wmi: Use devm_platform_profile_register()
  platform/x86: ideapad-laptop: Use devm_platform_profile_register()
  platform/x86: dell-pc: Use devm_platform_profile_register()
  platform/x86: asus-wmi: Use devm_platform_profile_register()
  platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
  platform/x86: acer-wmi: Use devm_platform_profile_register()
  platform/surface: surface_platform_profile: Use devm_platform_profile_register()
  ...

Pull input updates from Dmitry Torokhov:

 - more conversions to the guard notation in the input core

 - a fix for NXP BBNSM power key driver to clean up wake IRQ after
   unbinding

 - several new vendor/device ID pairs added to xpad game controller
   driver

 - several drivers switched to using str_enable_disable and similar
   helpers instead of open-coding

 - add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
   works out of the box (if userspace is ready to handle it)

 - evbug input handler has been removed (debugging through evdev is
   strongly preferred to dumping all events into the kernel log).

* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
  Input: synaptics - fix crash when enabling pass-through port
  Input: atkbd - map F23 key to support default copilot shortcut
  Input: xpad - add support for Nacon Evol-X Xbox One Controller
  Input: xpad - add unofficial Xbox 360 wireless receiver clone
  Input: xpad - add support for wooting two he (arm)
  Input: xpad - improve name of 8BitDo controller 2dc8:3106
  Input: xpad - add QH Electronics VID/PID
  Input: joystick - use str_off_on() helper in sw_connect()
  Input: Use str_enable_disable-like helpers
  Input: use guard notation in input core
  Input: poller - convert locking to guard notation
  Input: mt - make use of __free() cleanup facility
  Input: mt - convert locking to guard notation
  Input: ff-memless - make use of __free() cleanup facility
  Input: ff-memless - convert locking to guard notation
  Input: ff-core - make use of __free() cleanup facility
  Input: ff-core - convert locking to guard notation
  Input: remove evbug driver
  Input: mma8450 - add chip ID check in probe
  Input: bbnsm_pwrkey - add remove hook
  ...