Pull input fixes from Dmitry Torokhov: - Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G, Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode - a number of new controllers added to xpad driver: HORI Drum controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller, 8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode Controller, Hyperkin DuchesS Xbox One controller - fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's Edge Official controllers - fixes to xpad driver to properly handle "Share" button on some controllers - a fix for device initialization timing and for waking up the controller in cyttsp5 driver - a fix for hisi_powerkey driver to properly wake up from s2idle state - other assorted cleanups and fixes * tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - fix xpad_device sorting Input: xpad - add support for several more controllers Input: xpad - fix Share button on Xbox One controllers Input: xpad - fix two controller table values Input: hisi_powerkey - enable system-wakeup for s2idle Input: synaptics - enable InterTouch on Dell Precision M3800 Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5 Input: synaptics - enable InterTouch on Dynabook Portege X30L-G Input: synaptics - enable InterTouch on Dynabook Portege X30-D Input: synaptics - enable SMBus for HP Elitebook 850 G1 Input: mtk-pmic-keys - fix possible null pointer dereference Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller Input: cyttsp5 - fix power control issue on wakeup MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address Input: stmpe-ts - use module alias instead of device table Input: cyttsp5 - ensure minimum reset pulse width Input: sparcspkr - avoid unannotated fall-through input/joystick: magellan: Mark __nonstring look-up table
To wake up the system from s2idle when pressing the power-button, let's convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows us to specify the "hard" in-parameter, which needs to be set for s2idle. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix follow warnings with clang-21i (and reformat for clarity):
drivers/input/misc/sparcspkr.c:78:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
78 | case SND_TONE: break;
| ^
drivers/input/misc/sparcspkr.c:78:3: note: insert 'break;' to avoid fall-through
78 | case SND_TONE: break;
| ^
| break;
drivers/input/misc/sparcspkr.c:113:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
113 | case SND_TONE: break;
| ^
drivers/input/misc/sparcspkr.c:113:3: note: insert 'break;' to avoid fall-through
113 | case SND_TONE: break;
| ^
| break;
2 warnings generated.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/6730E40353C76908+20250415052439.155051-1-wangyuli@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov: - a brand new driver for touchpads and touchbars in newer Apple devices - support for Berlin-A series in goodix-berlin touchscreen driver - improvements to matrix_keypad driver to better handle GPIOs toggling - assorted small cleanups in other input drivers * tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix_berlin - add support for Berlin-A series dt-bindings: input: goodix,gt9916: Document gt9897 compatible dt-bindings: input: matrix_keypad - add wakeup-source property dt-bindings: input: matrix_keypad - add missing property Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq() Input: synaptics - hide unused smbus_pnp_ids[] array Input: apple_z2 - fix potential confusion in Kconfig Input: matrix_keypad - use fsleep for delays after activating columns Input: matrix_keypad - add settle time after enabling all columns dt-bindings: input: matrix_keypad: add settle time after enabling all columns dt-bindings: input: matrix_keypad: convert to YAML dt-bindings: input: Correct indentation and style in DTS example MAINTAINERS: Add entries for Apple Z2 touchscreen driver Input: apple_z2 - add a driver for Apple Z2 touchscreens dt-bindings: input: touchscreen: Add Z2 controller Input: Switch to use hrtimer_setup() Input: drop vb2_ops_wait_prepare/finish
Prepare input updates for 6.15 merge window.
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
Pull input updates from Dmitry Torokhov: - several new device IDs added to xpad game controller driver - support for imagis IST3038H variant of chip added to imagis touch controller driver - a fix for GPIO allocation for ads7846 touch controller driver - a fix for iqs7222 driver to properly support status register - a fix for goodix-berlin touch controller driver to use the right name for the regulator - more i8042 quirks to better handle several old Clevo devices. * tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: MAINTAINERS: Remove myself from the goodix touchscreen maintainers Input: iqs7222 - preserve system status register Input: i8042 - swap old quirk combination with new quirk for more devices Input: i8042 - swap old quirk combination with new quirk for several devices Input: i8042 - add required quirks for missing old boardnames Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ Input: xpad - rename QH controller to Legion Go S Input: xpad - add support for TECNO Pocket Go Input: xpad - add support for ZOTAC Gaming Zone Input: goodix-berlin - fix vddio regulator references Input: goodix-berlin - fix comment referencing wrong regulator Input: imagis - add support for imagis IST3038H dt-bindings: input/touchscreen: imagis: add compatible for ist3038h Input: xpad - add multiple supported devices Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers Input: ads7846 - fix gpiod allocation Input: wdt87xx_i2c - fix compiler warning
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b73 ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sync up with the mainline.
Since 'sw_debounce_end_time' of 'struct pm8941_pwrkey' is of type
'ktime_t', use 'ktime_to_us()' to print the value in microseconds
as it is announced in a call to 'dev_dbg()'. Compile tested only.
Fixes: 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press debouncing support")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20250216170336.861025-1-dmantipov@yandex.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>