linux-toradex.git/drivers/input/mouse/elantech.c, branch v3.10.78

Input: elantech - fix absolute mode setting on some ASUS laptops

2015-05-06T19:56:24+00:00

commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Reported-and-tested-by: George Moutsopoulos 
Signed-off-by: Ulrik De Bie 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix detection of touchpad on ASUS s301l

2014-10-05T21:54:12+00:00

commit 271329b3c798b2102120f5df829071c211ef00ed upstream.

Adjust Elantech signature validation to account fo rnewer models of
touchpads.

Reported-and-tested-by: Màrius Monton 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

2014-07-07T01:54:13+00:00

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann 
Tested-by: Philipp Wolfer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - deal with clickpads reporting right button events

2014-07-07T01:54:13+00:00

commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream.

At least the Dell Vostro 5470 elantech *clickpad* reports right button
clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally
no matter where the user clicks on the pad the pad always reports a left
button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom
corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still
want to report it as such to userspace, so that things like finger movement
in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click
on elantech clickpads. As an added advantage this is something which we can
simply do on all elantech clickpads, so no need to add special quirks for
this weird model.

Reported-and-tested-by: Elder Marco 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix touchpad initialization on Gigabyte U2442

2014-06-07T20:25:36+00:00

commit 36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream.

The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2

Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"

Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.

https://bugzilla.kernel.org/show_bug.cgi?id=61151

Reported-by: Philipp Wolfer 
Tested-by: Philipp Wolfer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - improve clickpad detection

2014-03-31T16:58:14+00:00

commit c15bdfd5b9831e4cab8cfc118243956e267dd30e upstream.

The current assumption in the elantech driver that hw version 3 touchpads
are never clickpads and hw version 4 touchpads are always clickpads is
wrong.

There are several bug reports for this, ie:
https://bugzilla.redhat.com/show_bug.cgi?id=1030802
http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux

I've spend a couple of hours wading through various bugzillas, launchpads
and forum posts to create a list of fw-versions and capabilities for
different laptop models to find a good method to differentiate between
clickpads and versions with separate hardware buttons.

Which shows that a device being a clickpad is reliable indicated by bit 12
being set in the fw_version. I've included the gathered list inside the
driver, so that we've this info at hand if we need to revisit this later.

Signed-off-by: Hans de Goede 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Cc: Josh Boyer 
Signed-off-by: Greg Kroah-Hartman

Input: MT - Add flags to input_mt_init_slots()

2012-09-19T17:50:18+00:00

Preparing to move more repeated code into the mt core, add a flags
argument to the input_mt_slots_init() function.

Reviewed-and-tested-by: Benjamin Tissoires 
Tested-by: Ping Cheng 
Acked-by: Dmitry Torokhov 
Signed-off-by: Henrik Rydberg

Input: elantech - v4 is a clickpad, with only one button

2012-04-10T07:40:35+00:00

Add pointer and buttonpad properties for v4 hardware.

Also, Jachiet reported that on Asus UX31, right button has no effect.
It turns out v4 has only one button, the right-button effect is
implemented with software when Windows driver is installed, or in
firmware when touchpad is in relative mode. So remove BTN_RIGHT
while at it.

Reported-by: Jachiet Louis 
Signed-off-by: JJ Ding 
Reviewed-by: Chase Douglas 
Signed-off-by: Dmitry Torokhov

Input: elantech - reset touchpad before configuring it

2012-04-10T07:40:31+00:00

Acer VH40 has a Fn key toggling the touchpad on and off, but it's
implemented in system firmware, and the EC chip has to receive
reset command to activate this function. Also when this machine
wakes up after resume, psmouse_reset is necessary to bring the
touchpad back on.

Signed-off-by: JJ Ding 
Reviewed-by: Chase Douglas 
Signed-off-by: Dmitry Torokhov

Merge commit 'v3.2-rc3' into next

2011-11-29T09:51:07+00:00