New ICs are using a different scheme for the alternate bus parameter. Given that they are new and are only using either PS2 only or PS2 + SMBus Host Notify, we force those new ICs to use the SMBus solution for enhanced reporting. This allows the touchpad found on the Lenovo T480s to report 5 fingers every 8 ms, instead of having a limit of 2 every 8 ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The command ETP_RESOLUTION_QUERY also contains the bus information. It is better to fetch it once, while we are querying for device information. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for SMBus device support, move static device information that we query form the touchpad upon initialization into separate structure. This will allow us to query the device without allocating memory first. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Cc: stable@vger.kernel.org Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some elantech v3 touchpad equipped laptops also have a trackpoint, before this commit, these give sync errors. With this patch, the trackpoint is provided as another input device: 'Elantech PS/2 TrackPoint' The patch will also output messages that do not follow the expected pattern. In the mean time I've seen 2 unknown packets occasionally: 0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00 I don't know what those are for, but they can be safely ignored. Currently all packets that are not known to v3 touchpad and where packet[3] (the fourth byte) lowest nibble is 6 are now recognized as PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint. This has been verified to work on a laptop Lenovo L530 where the touchpad/trackpoint combined identify themselves as: psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02) psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Cc: stable@vger.kernel.org Reported-by: Philipp Wolfer <ph.wolfer@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The signatures of v3 and v4 packets change depending on the value of a hardware flag called 'crc_enabled'. The packet type detection must change accordingly. This patch also restores a consistency check for v4 packets inadvertently removed by commit: 9eebed7de660c0b5ab129a9de4f89d20b60de68c Input: elantech - fix for newer hardware versions (v7) A note about the naming convention: v3 hardware is associated with IC body v5 while v4 hardware is associated with IC body v6 and v7. The above commit refers to IC body v7, not to v7 hardware. Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1) Tested-by: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It turns out that v4's firmware provides a command so we can query the resolution. Let's use it. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>