linux-toradex.git/drivers/input/serio/serport.c, branch v6.2-rc2

Input: move from strlcpy with unused retval to strscpy

2022-08-18T22:44:08+00:00

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Signed-off-by: Wolfram Sang 
Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov

tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl

2021-11-25T17:36:27+00:00

After the previous patches, noone needs 'file' parameter in neither
ioctl hook from tty_ldisc_ops. So remove 'file' from both of them.

Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Andreas Koensgen 
Cc: Paul Mackerras 
Acked-by: Krzysztof Kozlowski  [NFC]
Acked-by: Dmitry Torokhov 
Acked-by: Marc Kleine-Budde 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: make tty_ldisc_ops::hangup return void

2021-09-22T14:59:13+00:00

The documentation says that the return value of tty_ldisc_ops::hangup
hook is ignored. And it really is, so there is no point for its return
type to be int. Switch it to void and all the hooks too.

Cc: Dmitry Torokhov 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Paul Mackerras 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Cc: Peter Ujfalusi 
Acked-by: Dmitry Torokhov 
Acked-by: Mark Brown 
Acked-by: Marc Kleine-Budde 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210914091134.17426-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: make tty_ldisc_ops a param in tty_unregister_ldisc

2021-05-13T14:57:16+00:00

Make tty_unregister_ldisc symmetric to tty_register_ldisc by accepting
struct tty_ldisc_ops as a parameter instead of ldisc number. This avoids
checking of the ldisc number bounds in tty_unregister_ldisc.

Signed-off-by: Jiri Slaby 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: Andreas Koensgen 
Cc: Paul Mackerras 
Cc: Rodolfo Giometti 
Cc: Peter Ujfalusi 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Link: https://lore.kernel.org/r/20210505091928.22010-17-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: set tty_ldisc_ops::num statically

2021-05-13T14:57:16+00:00

There is no reason to pass the ldisc number to tty_register_ldisc
separately. Just set it in the already defined tty_ldisc_ops in all the
ldiscs.

This simplifies tty_register_ldisc a bit too (no need to set the num
member there).

Signed-off-by: Jiri Slaby 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: Andreas Koensgen 
Cc: Paul Mackerras 
Cc: Rodolfo Giometti 
Cc: Peter Ujfalusi 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Link: https://lore.kernel.org/r/20210505091928.22010-15-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: make fp of tty_ldisc_ops::receive_buf{,2} const

2021-05-13T14:57:16+00:00

Char pointer (cp) passed to tty_ldisc_ops::receive_buf{,2} is const.
There is no reason for flag pointer (fp) not to be too. So switch it in
the definition and all uses.

Signed-off-by: Jiri Slaby 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: Andreas Koensgen 
Cc: Paul Mackerras 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Cc: Peter Ujfalusi 
Link: https://lore.kernel.org/r/20210505091928.22010-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer

2021-01-21T00:48:47+00:00

The tty line discipline .read() function was passed the final user
pointer destination as an argument, which doesn't match the 'write()'
function, and makes it very inconvenient to do a splice method for
ttys.

This is a conversion to use a kernel buffer instead.

NOTE! It does this by passing the tty line discipline ->read() function
an additional "cookie" to fill in, and an offset into the cookie data.

The line discipline can fill in the cookie data with its own private
information, and then the reader will repeat the read until either the
cookie is cleared or it runs out of data.

The only real user of this is N_HDLC, which can use this to handle big
packets, even if the kernel buffer is smaller than the whole packet.

Cc: Christoph Hellwig 
Cc: Greg Kroah-Hartman 
Cc: Al Viro 
Signed-off-by: Linus Torvalds

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

change semantics of ldisc ->compat_ioctl()

2018-10-13T04:50:53+00:00

First of all, make it return int.  Returning long when native method
had never allowed that is ridiculous and inconvenient.

More importantly, change the caller; if ldisc ->compat_ioctl() is NULL
or returns -ENOIOCTLCMD, tty_compat_ioctl() will try to feed cmd and
compat_ptr(arg) to ldisc's native ->ioctl().

That simplifies ->compat_ioctl() instances quite a bit - they only
need to deal with ioctls that are neither generic tty ones (those
would get shunted off to tty_ioctl()) nor simple compat pointer ones.

Note that something like TCFLSH won't reach ->compat_ioctl(),
even if ldisc ->ioctl() does handle it - it will be recognized
earlier and passed to tty_ioctl() (and ultimately - ldisc ->ioctl()).

For many ldiscs it means that NULL ->compat_ioctl() does the
right thing.  Those where it won't serve (see e.g. n_r3964.c) are
also easily dealt with - we need to handle the numeric-argument
ioctls (calling the native instance) and, if such would exist,
the ioctls that need layout conversion, etc.

All in-tree ldiscs dealt with.

Signed-off-by: Al Viro

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds