linux-toradex.git/drivers/input/serio, branch v4.4.93

Input: i8042 - add Gigabyte P57 to the keyboard reset table

2017-09-27T09:00:13+00:00

commit 697c5d8a36768b36729533fb44622b35d56d6ad0 upstream.

Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.

BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - fix crash at boot time

2017-07-27T22:06:08+00:00

commit 340d394a789518018f834ff70f7534fc463d3226 upstream.

The driver checks port->exists twice in i8042_interrupt(), first when
trying to assign temporary "serio" variable, and second time when deciding
whether it should call serio_interrupt(). The value of port->exists may
change between the 2 checks, and we may end up calling serio_interrupt()
with a NULL pointer:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: [] _spin_lock_irqsave+0x1f/0x40
PGD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:

Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:[]  [] _spin_lock_irqsave+0x1f/0x40
RSP: 0018:ffff880028203cc0  EFLAGS: 00010082
RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050
RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0
R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098
FS:  0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500)
Stack:
ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000
 0000000000000000 0000000000000000 0000000000000000 0000000000000098
 ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac
Call Trace:

 [] serio_interrupt+0x36/0xa0
[] i8042_interrupt+0x132/0x3a0
[] ? kvm_clock_read+0x1c/0x20
[] ? kvm_clock_get_cycles+0x9/0x10
[] handle_IRQ_event+0x60/0x170
[] ? kvm_guest_apic_eoi_write+0x44/0x50
[] handle_edge_irq+0xde/0x180
[] handle_irq+0x49/0xa0
[] do_IRQ+0x6c/0xf0
[] ret_from_intr+0x0/0x11
[] ? __do_softirq+0x73/0x1e0
[] ? hrtimer_interrupt+0x14b/0x260
[] ? call_softirq+0x1c/0x30
[] ? do_softirq+0x65/0xa0
[] ? irq_exit+0x85/0x90
[] ? smp_apic_timer_interrupt+0x70/0x9b
[] ? apic_timer_interrupt+0x13/0x20

To avoid the issue let's change the second check to test whether serio is
NULL or not.

Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of
trying to be overly smart and using memory barriers.

Signed-off-by: Chen Hong 
[dtor: take lock in i8042_start()/i8042_stop()]
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

2017-06-29T10:48:51+00:00

commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 upstream.

Without this quirk, the touchpad is not responsive on this product, with
the following message repeated in the logs:

 psmouse serio1: bad data from KBC - timeout

Add it to the notimeout list alongside other similar Fujitsu laptops.

Signed-off-by: Daniel Drake 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Clevo P650RS to the i8042 reset list

2017-05-03T04:19:55+00:00

commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 upstream.

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.

Reported-by: Paweł Bylica 
Tested-by: Ed Bordin 
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000

2017-03-30T07:35:14+00:00

commit 45838660e34d90db8d4f7cbc8fd66e8aff79f4fe upstream.

The aux port does not get detected without noloop quirk, so external PS/2
mouse cannot work as result.

The PS/2 mouse can work with this quirk.

BugLink: https://bugs.launchpad.net/bugs/1591053
Signed-off-by: Kai-Heng Feng 
Reviewed-by: Marcos Paulo de Souza 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Pegatron touchpad to noloop table

2017-01-19T19:17:18+00:00

commit 41c567a5d7d1a986763e58c3394782813c3bcb03 upstream.

Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able
to recognize a Synaptics touchpad in the AUX port.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791
(Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B))

Suggested-by: Dmitry Torokhov 
Signed-off-by: Marcos Paulo de Souza 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add XMG C504 to keyboard reset table

2016-11-10T15:36:35+00:00

commit da25311c7ca8b0254a686fc0d597075b9aa3b683 upstream.

The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.

With this patch the touchpad is detected:

$ dmesg | grep -E "(i8042|Elantech|elantech)"

[    2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.680372] i8042: Attempting to reset device connected to KBD port
[    2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[    3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[    3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6

Signed-off-by: Patrick Scheuring 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - skip selftest on ASUS laptops

2016-10-28T07:01:31+00:00

commit 930e19248e9b61da36c967687ca79c4d5f977919 upstream.

On suspend/resume cycle, selftest is executed to reset i8042 controller.
But when this is done in Asus devices, subsequent calls to detect/init
functions to elantech driver fails. Skipping selftest fixes this problem.

An easier step to reproduce this problem is adding i8042.reset=1 as a
kernel parameter. On Asus laptops, it'll make the system to start with the
touchpad already stuck, since psmouse_probe forcibly calls the selftest
function.

This patch was inspired by John Hiesey's change[1], but, since this problem
affects a lot of models of Asus, let's avoid running selftests on them.

All models affected by this problem:
A455LD
K401LB
K501LB
K501LX
R409L
V502LX
X302LA
X450LCP
X450LD
X455LAB
X455LDB
X455LF
Z450LA

[1]: https://marc.info/?l=linux-input&m=144312209020616&w=2

Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
(https://bugzilla.kernel.org/show_bug.cgi?id=107971)

Signed-off-by: Marcos Paulo de Souza 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

2016-09-07T06:32:44+00:00

commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream.

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III 
Tested-by: Bruno Wolff III 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - break load dependency between atkbd/psmouse and i8042

2016-09-07T06:32:44+00:00

commit 4097461897df91041382ff6fcd2bfa7ee6b2448c upstream.

As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.

> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c.  atkbd.c depends on libps2.c because it invokes
> ps2_command().  libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner().  As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)

To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.

Reported-by: Mark Laws 
Tested-by: Mark Laws 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman