linux-toradex.git/drivers/input/tablet/aiptek.c, branch v4.9.124

Input: aiptek - stop saving struct usb_device

2016-03-31T20:13:40+00:00

The device can now easily be derived from the interface.
Stop leaving a private copy.

Signed-off-by: Oliver Neukum 
Signed-off-by: Dmitry Torokhov

Input: aiptek - fix crash on detecting device without endpoints

2015-12-02T17:35:41+00:00

The aiptek driver crashes in aiptek_probe() when a specially crafted USB
device without endpoints is detected. This fix adds a check that the device
has proper configuration expected by the driver. Also an error return value
is changed to more matching one in one of the error paths.

Reported-by: Ralf Spenneberg 
Signed-off-by: Vladis Dronov 
Signed-off-by: Dmitry Torokhov

Input: delete non-required instances of include

2014-01-07T07:23:57+00:00

None of these files are actually using any __init type directives
and hence don't need to include .  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker 
Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-05-24T17:34:29+00:00

Pull input layer updates from Dmitry Torokhov:
 - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics
   Navpoint, LM8333 keypads, Wacom I2C touhscreen);
 - updates to existing touchpad drivers (ALPS, Sntelic);
 - Wacom driver now supports Intuos5;
 - device-tree bindings in numerous drivers;
 - other cleanups and fixes.

Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think
implies that the input layer device naming is broken, but let's see.  I
brough it up with Dmitry.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: matrix-keymap - fix building keymaps
  Input: spear-keyboard - document DT bindings
  Input: spear-keyboard - add device tree bindings
  Input: matrix-keymap - wire up device tree support
  Input: matrix-keymap - uninline and prepare for device tree support
  Input: adp5588 - add support for gpio names
  Input: omap-keypad - dynamically handle register offsets
  Input: synaptics - fix compile warning
  MAINTAINERS: adjust input-related patterns
  Input: ALPS - switch to using input_mt_report_finger_count
  Input: ALPS - add semi-MT support for v4 protocol
  Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
  Input: atmel_mxt_ts - dump each message on just 1 line
  Input: atmel_mxt_ts - do not read extra (checksum) byte
  Input: atmel_mxt_ts - verify object size in mxt_write_object
  Input: atmel_mxt_ts - only allow root to update firmware
  Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
  Input: sentelic - report device's production serial number
  Input: tl6040-vibra - Device Tree support
  Input: evdev - properly handle read/write with count 0
  ...

USB: input: aiptek.c: fix up dev_* messages

2012-05-04T22:33:06+00:00

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov 
CC: Jesper Juhl 
CC: JJ Ding 
CC: Edwin van Vliet 
Signed-off-by: Greg Kroah-Hartman

USB: aiptek.c: remove dbg() usage

2012-05-02T04:33:12+00:00

dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov 
CC: Jesper Juhl 
CC: JJ Ding 
CC: Edwin van Vliet 
Signed-off-by: Greg Kroah-Hartman

USB: input: aiptek.c: fix up dev_err() usage

2012-05-02T00:56:56+00:00

We should always reference the input device for dev_err(), not the USB
device.  Fix up the places where I got this wrong.

Reported-by: Dmitry Torokhov 
CC: Jesper Juhl 
CC: JJ Ding 
CC: Edwin van Vliet 
Signed-off-by: Greg Kroah-Hartman

USB: aiptek.c: remove err() usage

2012-04-25T21:48:36+00:00

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Dmitry Torokhov 
CC: Jesper Juhl 
CC: JJ Ding 
CC: Edwin van Vliet 
Signed-off-by: Greg Kroah-Hartman

Input: aiptek - adjust error-handling code label

2012-04-24T06:36:05+00:00

At the point of this error-handling code, aiptek->urb has been allocated,
and it does not appear to be less necessary to free it here than in the
error-handling code just below.

Signed-off-by: Julia Lawall 
Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-01-10T18:55:52+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
  Input: tc3589x-keypad - add missing kerneldoc
  Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages
  Input: ucb1400_ts - convert to threaded IRQ
  Input: ucb1400_ts - drop inline annotations
  Input: usb1400_ts - add __devinit/__devexit section annotations
  Input: ucb1400_ts - set driver owner
  Input: ucb1400_ts - convert to use dev_pm_ops
  Input: psmouse - make sure we do not use stale methods
  Input: evdev - do not block waiting for an event if fd is nonblock
  Input: evdev - if no events and non-block, return EAGAIN not 0
  Input: evdev - only allow reading events if a full packet is present
  Input: add driver for pixcir i2c touchscreens
  Input: samsung-keypad - implement runtime power management support
  Input: tegra-kbc - report wakeup key for some platforms
  Input: tegra-kbc - add device tree bindings
  Input: add driver for AUO In-Cell touchscreens using pixcir ICs
  Input: mpu3050 - configure the sampling method
  Input: mpu3050 - ensure we enable interrupts
  Input: mpu3050 - add of_match table for device-tree probing
  Input: sentelic - document the latest hardware
  ...

Fix up fairly trivial conflicts (device tree matching conflicting with
some independent cleanups) in drivers/input/keyboard/samsung-keypad.c