linux-toradex.git/drivers/input/touchscreen/usbtouchscreen.c, branch v2.6.34.8

Merge branch 'next' into for-linus

2010-03-01T07:55:20+00:00

Input: usbtouchscreen - extend coordinate range for Generaltouch devices

2010-02-22T07:02:51+00:00

Generaltouch protocol allows for coordinates in [0, 0xffff] range and
there are devices reporting coordinates as high as 0x7fff so let's update
the driver to reflect that.

Signed-off-by: Roy Yin 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - fix leaks and check return value of usb_submit_urb()

2010-02-04T08:22:01+00:00

Fix urb leak in error path of initialization and make sure we handle
errors from initial usb_submit_urb().

Signed-off-by: Ondrej Zary 
Signed-off-by: Andrew Morton 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add NEXIO (or iNexio) support

2010-02-04T08:21:56+00:00

Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen
driver.  Tested with NEX170MRT 17" LCD monitor with integrated touchscreen
(with xserver-xorg-input-evtouch 0.8.8-1):

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=1870 ProdID=0001 Rev= 1.00
S:  Manufacturer=iNexio
S:  Product=iNexio USB
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

No datasheet is available, this was written by capturing some data with
SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/

Signed-off-by: Ondrej Zary 
Signed-off-by: Andrew Morton 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - find input endpoint automatically

2010-02-04T08:21:52+00:00

Find input enpoint automatically instead of assuming that the first one is
OK.  This is needed for devices with multiple endpoints such as iNexio
where the first endpoint might be output.

Signed-off-by: Ondrej Zary 
Signed-off-by: Andrew Morton 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - convert from usb_device to usb_interface

2010-02-04T08:21:45+00:00

Convert usbtouchscreen from storing usb_device to usb_interface. This is
needed for multi-interface touchscreen devices such as iNexio.

Signed-off-by: Ondrej Zary 
Signed-off-by: Andrew Morton 
Signed-off-by: Dmitry Torokhov

Input: make USB device ids constant

2010-01-11T08:08:19+00:00

The id_table field of the struct usb_device_id is constant in 
so it makes sense to mark the initialization data also constant.

Signed-off-by: Márton Németh 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller

2009-11-30T07:38:01+00:00

This patch adds support for the ET&T TC5UH 5-wire USB touchscreen controller.
More info at http://www.etandt.com.tw/board_solution.html

Signed-off-by: Petr Štetiar 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - add support for Zytronic capacitive touchscreen

2009-11-23T16:52:08+00:00

Zytronic USB-attached capacitive touchscreen support within the generic
USB touchscreen driver.

Signed-off-by: Daniel Silverstone 
Signed-off-by: Vincent Sanders 
Signed-off-by: Simtec Linux Team 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - remove unneeded usb_kill_urb

2009-11-23T16:49:31+00:00

usb_kill_urb() in disconnect is not needed as unregistering will cause
close() to be called.

Signed-off-by: Oliver Neukum 
Signed-off-by: Dmitry Torokhov