linux-toradex.git/drivers/input, branch PD13.0.0alpha Linux kernel for Apalis and Colibri modules ENGR00181407-3: Add Compaq touch screen interface for nano-x 2012-10-17T18:37:24+00:00 Alison Wang b18965@freescale.com 2012-10-08T06:19:40+00:00 32788800d684c30297e35a99fbe69e36476f7464 Add Compaq touch screen interface for nano-x. Nano-x work with touch screen driver via Compaq touch screen event format, this patch could add the support above mouse device. Signed-off-by: Alison Wang <b18965@freescale.com> 
Add Compaq touch screen interface for nano-x.

Nano-x work with touch screen driver via Compaq touch
screen event format, this patch could add the support
above mouse device.

Signed-off-by: Alison Wang <b18965@freescale.com>
ENGR00181407-2: ts: add touch screen driver support for Vybird 2012-10-17T18:37:23+00:00 Alison Wang b18965@freescale.com 2012-10-11T00:29:04+00:00 493a365e3619b58a315fd568546b8bd4acd09c98 Add touch screen driver support for Vybird. Signed-off-by: Alison Wang <b18965@freescale.com> 
Add touch screen driver support for Vybird.

Signed-off-by: Alison Wang <b18965@freescale.com>
ENGR00174212 isl29023: fix build error of isl29023 light sensor 2012-02-10T08:49:45+00:00 Xinyu Chen b03824@freescale.com 2012-02-10T07:55:59+00:00 5dc82fc25041cedfe1a656ec2e8589e5adfed542 the platform data and irq set type interface is changed. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com> 
the platform data and irq set type interface is changed.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
ENGR00171111 MX6Q/TOUCHSCREEN : change the printk to dynamic print 2012-01-09T13:13:46+00:00 Huang Shijie b32955@freescale.com 2011-12-31T05:43:00+00:00 ebc62bf1b7857c55cdda5e5e66008089d3ea5391 Too much printk make the dmesg mess. Change it to dynamic print mode. Signed-off-by: Huang Shijie <b32955@freescale.com> 
Too much printk make the dmesg mess.
Change it to dynamic print mode.

Signed-off-by: Huang Shijie <b32955@freescale.com>
ENGR00139238-2 Touch: add p1003 and egalax 2012-01-09T12:21:34+00:00 Frank Li Frank.Li@freescale.com 2011-07-20T10:41:50+00:00 34eb292ef7fb5c92a8901391161bd3a119bbf202 Add p1003 and egalax touch driver Signed-off-by: Frank Li <Frank.Li@freescale.com> 
Add p1003 and egalax touch driver

Signed-off-by: Frank Li <Frank.Li@freescale.com>
ENGR00140122 MX53_SMD: p1003: report single pointer. 2012-01-09T12:08:00+00:00 Zhang Jiejing jiejing.zhang@freescale.com 2011-04-11T07:36:38+00:00 e038117befaa39ddfe600c4e50c550872d52613f Since Ubuntu needs report single pointer, I add BTN_TOUCH event in single pointer event report. It will not affact Android, also made ubuntu touchscreen works. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> 
Since Ubuntu needs report single pointer, I add BTN_TOUCH
event in single pointer event report.

It will not affact Android, also made ubuntu touchscreen works.

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
ENGR00138130-2 input: max11801: add calibrat function for mx53_ard RevA board 2012-01-09T12:07:59+00:00 Zhang Jiejing jiejing.zhang@freescale.com 2011-04-11T08:02:43+00:00 e041af78bcecb1bbdc8681d977212701d8f0a964 Add calibration for MX53 ARD Rev A board. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> 
Add calibration for MX53 ARD Rev A board.

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
ENGR00138130-1 input: add max11801 resistance touchscreen controller driver 2012-01-09T12:07:59+00:00 Zhang Jiejing jiejing.zhang@freescale.com 2011-04-06T15:52:22+00:00 53b9067bcf119ed3403324684caf55cb339fcc83 Add MAXI max11801 resistance touch screen controller driver, This driver use Auto Mode and Aperture Mode. Other max1180x driver can support in this driver, they use almost same register address and define, you can find a table in max11801_ts.c You can find data sheet under this link: http://www.maxim-ic.com/datasheet/index.mvp/id/5943 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> 
Add MAXI max11801 resistance touch screen controller driver,
This driver use Auto Mode and Aperture Mode.

Other max1180x driver can support in this driver, they use
almost same register address and define, you can find a table in
max11801_ts.c

You can find data sheet under this link:
http://www.maxim-ic.com/datasheet/index.mvp/id/5943

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
ENGR00140391 ISL29023:Keep int thresholds in interrupt handler 2012-01-09T12:07:58+00:00 Liu Ying Ying.Liu@freescale.com 2011-03-08T06:59:21+00:00 34496f0b27e6aa4aab2fff266b45b48d38638a45 We used to set the interrupt thresholds to the measure range of the light sensor in the interrupt handler, this potentially makes user poll on the input event and never be waken up. This patch keeps the interrupt thresholds in the interrupt handler and is tested on MX53 SMD. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> 
We used to set the interrupt thresholds to the measure range
of the light sensor in the interrupt handler, this potentially
makes user poll on the input event and never be waken up.

This patch keeps the interrupt thresholds in the interrupt
handler and is tested on MX53 SMD.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
ENGR00139383-2 Add ISL29023 light sensor support 2012-01-09T12:07:57+00:00 Liu Ying Ying.Liu@freescale.com 2011-02-22T09:11:30+00:00 c772defabfa3e5a79354a9803438874181626fbd This patch adds ISL29023 light sensor support. Users may control the light sensor work at different modes/ranges/resolutions or read the lux value via sysfs. A power state node is also created in sysfs. If the light sensor works at ALS once mode, users need to power down/power up the sensor before read the lux value again. Currently, IR(Infra Red) mode is not supported. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> 
This patch adds ISL29023 light sensor support.
Users may control the light sensor work at
different modes/ranges/resolutions or read
the lux value via sysfs.
A power state node is also created in sysfs.
If the light sensor works at ALS once mode,
users need to power down/power up the sensor
before read the lux value again.
Currently, IR(Infra Red) mode is not supported.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>