linux-toradex.git/drivers/input, branch v2.6.32-rc3

headers: remove sched.h from poll.h

2009-10-04T22:05:10+00:00

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Linus Torvalds

drivers/input/input.c: fix CONFIG_PM=n warning

2009-10-01T23:11:11+00:00

drivers/input/input.c:1277: warning: 'input_dev_reset' defined but not used

Acked-by: Dmitry Torokhov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry

2009-09-24T14:20:56+00:00

Fix these warnings:

  drivers/built-in.o: In function `apanel_remove':
  apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `apanel_probe':
  apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `acpi_fujitsu_hotkey_add':
  fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register'
  fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register'
  drivers/built-in.o: In function `wbcir_probe':
  winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register'
  winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `wbcir_remove':
  winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `fujitsu_cleanup':
  fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister'
  fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister'

It happens because the new INPUT_WINBOND_CIR driver relies on new-leds
infrastructure - but does not select it in drivers/input/misc/Kconfig.
But it selects LEDS_CLASS, which confuses a number of other drivers into
thinking that all the leds infrastructure is in place.

Fix this by selecting NEW_LEDS as well, like similar drivers do.

Eventually, this whole leds infrastructure complexity should be
cleaned up, it's been going on for years.

Signed-off-by: Ingo Molnar 
Cc: Jesse Barnes 
Cc: Dmitry Torokhov 
Cc: David Härdeman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2009-09-23T22:39:36+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add driver for Atmel AT42QT2160 Sensor Chip
  Input: max7359 - use threaded IRQs
  Input: add driver for Maxim MAX7359 key switch controller
  Input: add driver for ADP5588 QWERTY I2C Keypad
  Input: add touchscreen driver for MELFAS MCS-5000 controller
  Input: add driver for OpenCores Keyboard Controller
  Input: dm355evm_keys - remove dm355evm_keys_hardirq
  Input: synaptics_i2c - switch to using __cancel_delayed_work()
  Input: ad7879 - add support for AD7889
  Input: atkbd - rely on input core to restore state on resume
  Input: add generic suspend and resume for input devices
  Input: libps2 - additional locking for i8042 ports

Merge git://git.infradead.org/battery-2.6

2009-09-23T17:11:08+00:00

* git://git.infradead.org/battery-2.6:
  power_supply: Add driver for the PMU on WM831x PMICs
  ds2760_battery: Fix integer overflow for time_to_empty_now
  wm97xx_battery: Convert to dev_pm_ops
  wm97xx_battery: Use irq to detect charger state
  wm97xx_battery: Use platform_data
  wm97xx-core: Pass platform_data to battery
  ds2760_battery: implement set_charged() feature
  power_supply: get_by_name and set_charged functionality
  power_supply: EXPORT_SYMBOL cleanups
  ds2760_battery: add current_accum module parameter
  ds2760_battery: handle full_active_uAh == 0 case correctly
  ds2760_battery: add rated_capacity module parameter
  ds2760_battery: export more features
  ds2760_battery: delay power supply registration
  wm8350_power: Implement charge type property
  power_supply: Add a charge_type property, and use it for olpc driver
  olpc_battery: Add an 'error' sysfs device that displays raw errors
  Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"

spi: prefix modalias with "spi:"

2009-09-23T14:39:43+00:00

This makes it consistent with other buses (platform, i2c, vio, ...).  I'm
not sure why we use the prefixes, but there must be a reason.

This was easy enough to do it, and I did it.

Signed-off-by: Anton Vorontsov 
Cc: David Brownell 
Cc: David Woodhouse 
Cc: Grant Likely 
Cc: Jean Delvare 
Cc: Ben Dooks 
Cc: Benjamin Herrenschmidt 
Cc: Dmitry Torokhov 
Cc: Samuel Ortiz 
Cc: "John W. Linville" 
Acked-by: Mike Frysinger 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Input: add driver for Atmel AT42QT2160 Sensor Chip

2009-09-23T03:50:08+00:00

This version only supports individual cells (no slide support yet).
The code has been tested on proprietary development ARM board, but
should work fine on other machines.

Signed-off-by: Raphael Derosso Pereira 
Signed-off-by: Dmitry Torokhov

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

2009-09-22T23:49:27+00:00

Conflicts:
	drivers/power/wm97xx_battery.c

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2009-09-22T14:51:45+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...

input: add a driver for the Winbond WPCD376I Consumer IR hardware

2009-09-22T14:17:49+00:00

Add a driver for the the Consumer IR (CIR) functionality of the Winbond
WPCD376I chipset (found on e.g. Intel DG45FC motherboards).

Signed-off-by: David Härdeman 
Reviewed-by: Jesse Barnes 
Cc: Dmitry Torokhov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds