linux-toradex.git/drivers/input, branch v3.10.51

Input: fix defuzzing logic

2014-07-31T19:53:50+00:00

commit 50c5d36dab930b1f1b1e3348b8608aa8b9ee7610 upstream.

We attempt to remove noise from coordinates reported by devices in
input_handle_abs_event(), unfortunately, unless we were dropping the
event altogether, we were ignoring the adjusted value and were passing
on the original value instead.

Reviewed-by: Andrew de los Reyes 
Reviewed-by: Benson Leung 
Reviewed-by: David Herrmann 
Reviewed-by: Henrik Rydberg 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

2014-07-07T01:54:13+00:00

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann 
Tested-by: Philipp Wolfer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - deal with clickpads reporting right button events

2014-07-07T01:54:13+00:00

commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream.

At least the Dell Vostro 5470 elantech *clickpad* reports right button
clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally
no matter where the user clicks on the pad the pad always reports a left
button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom
corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still
want to report it as such to userspace, so that things like finger movement
in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click
on elantech clickpads. As an added advantage this is something which we can
simply do on all elantech clickpads, so no need to add special quirks for
this weird model.

Reported-and-tested-by: Elder Marco 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics - T540p - unify with other LEN0034 models

2014-06-07T20:25:36+00:00

commit 6d396ede224dc596d92d7cab433713536e68916c upstream.

The T540p has a touchpad with pnp-id LEN0034, all the models with this
pnp-id have the same min/max values, except the T540p where the values are
slightly off. Fix them to be identical.

This is a preparation patch for simplifying the quirk table.

Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add min/max quirk for the ThinkPad W540

2014-06-07T20:25:36+00:00

commit 0b5fe736fe923f1f5e05413878d5990e92ffbdf5 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1096436

Tested-and-reported-by: ajayr@bigfoot.com
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - fix touchpad initialization on Gigabyte U2442

2014-06-07T20:25:36+00:00

commit 36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream.

The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2

Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"

Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.

https://bugzilla.kernel.org/show_bug.cgi?id=61151

Reported-by: Philipp Wolfer 
Tested-by: Philipp Wolfer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: atkbd - fix keyboard not working on some LG laptops

2014-06-07T20:25:36+00:00

commit 3d725caa9dcc78c3dc9e7ea0c04f626468edd9c9 upstream.

After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops
working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands.

In order to keep changes in atkbd driver to the minimum we check DMI
signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG
LW25-B7HV or P1-J273B.

Signed-off-by: Sheng-Liang Song 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add min/max quirk for ThinkPad Edge E431

2014-05-13T11:59:46+00:00

commit 27a38856a948c3e8de30dc71647ff9e1778c99fc upstream.

Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1

2014-05-13T11:59:46+00:00

commit 46a2986ebbe18757c2d8c352f8fb6e0f4f0754e3 upstream.

We expect that all the Haswell series will need such quirks, sigh.

The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad,
with the same min/max issue.

The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation.

The X1 and T431s share a PnPID with the T540p, but the reported ranges are
closer to those of the T440s.

HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me,
S1 Yoga and X1 are written by Benjamin Tissoires.

Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the
X240, X1 uses the same touchpad as the T440.

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: cypress_ps2 - don't report as a button pads

2014-04-03T19:01:04+00:00

commit 6797b39e6f6f34c74177736e146406e894b9482b upstream.

The cypress PS/2 trackpad models supported by the cypress_ps2 driver
emulate BTN_RIGHT events in firmware based on the finger position, as part
of this no motion events are sent when the finger is in the button area.

The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that
BTN_RIGHT events should be emulated in userspace, which is not necessary
in this case.

When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion
event before propagating the button event higher up the stack, as it needs
current abs x + y data for its BTN_RIGHT emulation. Since in the
cypress_ps2 pads don't report motion events in the button area, this means
that clicks in the button area end up being ignored, so
INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and
removing it fixes:

https://bugs.freedesktop.org/show_bug.cgi?id=76341

Reported-by: Adam Williamson 
Tested-by: Adam Williamson 
Reviewed-by: Peter Hutterer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman