linux-toradex.git/drivers/input, branch v4.9.110

Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID

2018-06-16T07:52:34+00:00

commit e6e7e9cd8eed0e18217c899843bffbe8c7dae564 upstream.

Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo
v330 14IKB devices.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253
Signed-off-by: Johannes Wienke 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: goodix - add new ACPI id for GPD Win 2 touch screen

2018-06-16T07:52:34+00:00

commit 5ca4d1ae9bad0f59bd6f851c39b19f5366953666 upstream.

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c_smbus - fix corrupted stack

2018-06-06T14:44:33+00:00

commit 40f7090bb1b4ec327ea1e1402ff5783af5b35195 upstream.

New ICs (like the one on the Lenovo T480s) answer to
ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack
as i2c_smbus_read_block_data() uses the values returned by the i2c
device to know how many data it need to return.

i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX)
and there is no safeguard on how many bytes are provided in the return
value. Ensure we always have enough space for any future firmware.
Also 0-initialize the values to prevent any access to uninitialized memory.

Cc:  # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x
Signed-off-by: Benjamin Tissoires 
Acked-by: KT Liao 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: psmouse - fix Synaptics detection when protocol is disabled

2018-05-30T05:50:19+00:00

[ Upstream commit 2bc4298f59d2f15175bb568e2d356b5912d0cdd9 ]

When Synaptics protocol is disabled, we still need to try and detect the
hardware, so we can switch to SMBus device if SMbus is detected, or we know
that it is Synaptics device and reset it properly for the bare PS/2
protocol.

Fixes: c378b5119eb0 ("Input: psmouse - factor out common protocol probing code")
Reported-by: Matteo Croce 
Tested-by: Matteo Croce 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

2018-05-09T07:50:20+00:00

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.

The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta 
Signed-off-by: Salvatore Bellizzi 
Tested-by: Guenter Roeck 
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: leds - fix out of bound access

2018-05-09T07:50:20+00:00

commit 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream.

UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:

[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128

This happens because we were writing to the led structure before making
sure that it exists.

Reported-by: Tasos Sahanidis 
Tested-by: Tasos Sahanidis 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: drv260x - fix initializing overdrive voltage

2018-04-29T09:31:56+00:00

commit 74c82dae6c474933f2be401976e1530b5f623221 upstream.

We were accidentally initializing haptics->rated_voltage twice, and did not
initialize overdrive voltage.

Acked-by: Dan Murphy 
Signed-off-by: Dmitry Torokhov 
Cc: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

Input: goodix - disable IRQs while suspended

2018-04-13T17:48:31+00:00

[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ]

We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).

So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().

This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.

This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.

BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Reviewed-by: Bastien Nocera 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - clear INT before resetting controller

2018-04-13T17:48:06+00:00

[ Upstream commit 4b3c7dbbfff0673e8a89575414b864d8b001d3bb ]

Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.

Signed-off-by: KT Liao 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: elantech - force relative mode on a certain module

2018-04-13T17:47:55+00:00

[ Upstream commit d899520b0431e70279bfb5066ecb6dc91d0b7072 ]

One of Elan modules with sample version is 0x74 and hw_version is 0x03 has
a bug in absolute mode implementation, so let it run in default PS/2
relative mode.

Signed-off-by: KT Liao 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman