linux-toradex.git/drivers/input, branch v4.9.71

Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list

2017-12-20T09:07:20+00:00

[ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ]

TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.

Reported-by: Paul Menzel 
Suggested-by: Vojtech Pavlik 
Reviewed-by: Marcos Paulo de Souza 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: ims-psu - check if CDC union descriptor is sane

2017-11-18T10:22:24+00:00

commit ea04efee7635c9120d015dcdeeeb6988130cb67a upstream.

Before trying to use CDC union descriptor, try to validate whether that it
is sane by checking that intf->altsetting->extra is big enough and that
descriptor bLength is not too big and not too small.

Reported-by: Andrey Konovalov 
Signed-off-by: Dmitry Torokhov 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN060C to the ACPI table

2017-11-15T14:53:19+00:00

commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream.

ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: mpr121 - set missing event capability

2017-11-15T14:53:16+00:00

[ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ]

This driver reports misc scan input events on the sensor's status
register changes.  But the event capability for them was not set in the
device initialization, so these events were ignored.

This change adds the missing event capability.

Signed-off-by: Akinobu Mita 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: mpr121 - handle multiple bits change of status register

2017-11-15T14:53:15+00:00

[ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ]

This driver reports input events on their interrupts which are triggered
by the sensor's status register changes.  But only single bit change is
reported in the interrupt handler.  So if there are multiple bits are
changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

Signed-off-by: Akinobu Mita 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: gtco - fix potential out-of-bound access

2017-11-02T08:49:14+00:00

commit a50829479f58416a013a4ccca791336af3c584c7 upstream.

parse_hid_report_descriptor() has a while (i < length) loop, which
only guarantees that there's at least 1 byte in the buffer, but the
loop body can read multiple bytes which causes out-of-bounds access.

Reported-by: Andrey Konovalov 
Reviewed-by: Andrey Konovalov 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN0611 to the ACPI table

2017-11-02T08:49:14+00:00

commit 57a95b41869b8f0d1949c24df2a9dac1ca7082ee upstream.

ELAN0611 touchpad uses elan_i2c as its driver. It can be found
on Lenovo ideapad 320-15IKB.

So add it to ACPI table to enable the touchpad.

[Ido Adiv  reports that the same ACPI ID is used for
Elan touchpad in ideapad 520].

BugLink: https://bugs.launchpad.net/bugs/1723736
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Gigabyte P57 to the keyboard reset table

2017-09-27T12:39:19+00:00

commit 697c5d8a36768b36729533fb44622b35d56d6ad0 upstream.

Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.

BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: trackpoint - assume 3 buttons when buttons detection fails

2017-09-09T15:39:39+00:00

commit 293b915fd9bebf33cdc906516fb28d54649a25ac upstream.

Trackpoint buttons detection fails on ThinkPad 570 and 470 series,
this makes the middle button of the trackpoint to not being recogized.
As I don't believe there is any trackpoint with less than 3 buttons this
patch just assumes three buttons when the extended button information
read fails.

Signed-off-by: Oscar Campos 
Acked-by: Peter Hutterer 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Aaron Ma 
Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad

2017-08-30T08:21:44+00:00

commit 4a646580f793d19717f7e034c8d473b509c27d49 upstream.

Fixed the issue that two finger scroll does not work correctly
on V8 protocol. The cause is that V8 protocol X-coordinate decode
is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition.

Mote notes:
the problem manifests itself by the commit e7348396c6d5 ("Input: ALPS
- fix V8+ protocol handling (73 03 28)"), where a fix for the V8+
protocol was applied.  Although the culprit must have been present
beforehand, the two-finger scroll worked casually even with the
wrongly reported values by some reason.  It got broken by the commit
above just because it changed x_max value, and this made libinput
correctly figuring the MT events.  Since the X coord is reported as
falsely doubled, the events on the right-half side go outside the
boundary, thus they are no longer handled.  This resulted as a broken
two-finger scroll.

One finger event is decoded differently, and it didn't suffer from
this problem.  The problem was only about MT events. --tiwai

Fixes: e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)")
Signed-off-by: Masaki Ota 
Tested-by: Takashi Iwai 
Tested-by: Paul Donohue 
Signed-off-by: Takashi Iwai 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman