Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - a cleanup series to get rid of mindlessly copied code.

   - another bunch of new pointlessly different interrupt chip drivers.

     Adding homebrewn irq chips (and timers) to SoCs must provide a
     value add which is beyond the imagination of mere mortals.

   - the usual SoC irq controller updates, IOW my second cat herding
     project"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  irqchip: gic-v3: Implement CPU PM notifier
  irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling
  irqchip: renesas-intc-irqpin: Add minimal runtime PM support
  irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev
  irqchip: atmel-aic5: Add sama5d4 support
  irqchip: atmel-aic5: The sama5d3 has 48 IRQs
  Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding
  irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller
  irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs
  irqchip: renesas-irqc: Add DT binding documentation
  irqchip: renesas-intc-irqpin: Document SoC-specific bindings
  openrisc: Get rid of handle_IRQ
  arm64: Get rid of handle_IRQ
  ARM: omap2: irq: Convert to handle_domain_irq
  ARM: imx: tzic: Convert to handle_domain_irq
  ARM: imx: avic: Convert to handle_domain_irq
  irqchip: or1k-pic: Convert to handle_domain_irq
  irqchip: atmel-aic5: Convert to handle_domain_irq
  irqchip: atmel-aic: Convert to handle_domain_irq
  irqchip: gic-v3: Convert to handle_domain_irq
  ...

When a CPU enters a low power state, the contents of the GICv3/4 system
registers are lost. They need to be saved and restored if required.

For now, since most of the GICv3 register are set some initial values and
not modified at runtime, it is better to re-initialise rather than saving
and restoring them. It may need to be saved and restored in future if
required.

This patch adds a notifier to disable the redistributor(if allowed) and
Group1 interrupts when powering down the processor and to re-initialise
the system registers on wakeup.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1409065415-20176-3-git-send-email-sudeep.holla@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Currently gic_enable_redist configures the redistributors to never
assert WakeRequest signal. However when powering down the processors
with wake-up enabled(i.e suspend), we need to configure it to assert
that signal.

This patch extends gic_enable_redist so that the redistributor can be
configure to assert WakeRequest and hold interrupts as pending. This is
useful in suspending the processors.

This patch also adds check to make sure GICR_WAKER is accessible when
configuring it.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[maz: removed reference to GICD_CTLR.DS and added read-back of
      GICR_WAKER to check that it is not RAZ/WI]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1409065415-20176-2-git-send-email-sudeep.holla@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Use the new handle_domain_irq method to handle interrupts.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1409047421-27649-19-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The __percpu __iomem annotations on the rdist base are contradictory
and confuse static checkers such as sparse.

This patch fixes the anotations so that rdist is described as a __percpu
pointer to an __iomem pointer.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1409062410-25891-9-git-send-email-will.deacon@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This is only really needed for gic_write_sgi1r in the !SMP case since it
is only referenced in the SMP initialisation code but it seems better to
have these functions all next to each other and declared consistently.

Signed-off-by: Mark Brown <broonie@linaro.org>
Link: https://lkml.kernel.org/r/1406748194-21094-1-git-send-email-broonie@kernel.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

If building with CONFIG_SMP disbled (for example, with allnoconfig) then
GCC complains that the static function gic_peek_irq() is defined but not
used since the only reference is in the SMP initialisation code. Fix this
by moving the function definition inside the ifdef.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1406480224-24628-1-git-send-email-broonie@kernel.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

GICv3 introduces new system registers accessible with the full msr/mrs
syntax (e.g. mrs x0, Sop0_op1_CRm_CRn_op2). However, only recent
binutils understand the new syntax. This patch introduces msr_s/mrs_s
assembly macros which generate the equivalent instructions above and
converts the existing GICv3 code (both drivers/irqchip/ and
arch/arm64/kernel/).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Olof Johansson <olof@lixom.net>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>

The Generic Interrupt Controller (version 3) offers services that are
similar to GICv2, with a number of additional features:
- Affinity routing based on the CPU MPIDR (ARE)
- System register for the CPU interfaces (SRE)
- Support for more that 8 CPUs
- Locality-specific Peripheral Interrupts (LPIs)
- Interrupt Translation Services (ITS)

This patch adds preliminary support for GICv3 with ARE and SRE,
non-secure mode only. It relies on higher exception levels to grant ARE
and SRE access.

Support for LPI and ITS will be added at a later time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Zi Shen Lim <zlim@broadcom.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Reviewed-by: Yun Wu <wuyun.wu@huawei.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com>
Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>