linux-toradex.git/drivers/irqchip, branch v3.15-rc1

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T22:37:40+00:00

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...

Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T21:19:54+00:00

Pull ARM SoC specific changes from Arnd Bergmann:
 "Lots of changes specific to one of the SoC families.  Some that stick
  out are:

   - mach-qcom gains new features, most importantly SMP support for the
     newer chips (Stephen Boyd, Rohit Vaswani)
   - mvebu gains support for three new SoCs: Armada 375, 380 and 385
     (Thomas Petazzoni and Free-electrons team)
   - SMP support for Rockchips (Heiko Stübner)
   - Lots of i.MX changes (Shawn Guo)
   - Added support for BCM5301x SoC (Hauke Mehrtens)
   - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
     and Sebastian Hesselbarth doing the final part of a long journey)
   - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
     Bergmann)"

* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
  ARM: cache-tauros2: remove ARMv6 code
  ARM: mvebu: don't select CONFIG_NEON
  ARM: davinci: fix DT booting with default defconfig
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: davinci: remove tnetv107x support
  MAINTAINERS: Update ARM STi maintainers
  ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
  ARM: bcm21664: Add board support.
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: enable ARM_HAS_SG_CHAIN for multiplatform
  ARM: davinci: remove da8xx_omapl_defconfig
  ARM: davinci: da8xx: fix multiple watchdog device registration
  ARM: davinci: add da8xx specific configs to davinci_all_defconfig
  ARM: davinci: enable da8xx build concurrently with older devices
  ARM: BCM5301X: workaround suppress fault
  ARM: BCM5301X: add early debugging support
  ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
  ARM: mach-bcm: Remove GENERIC_TIME
  ARM: shmobile: APMU: Fix warnings due to improper printk formats
  ...

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T20:51:19+00:00

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...

Merge tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T20:44:27+00:00

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "Lots of isolated bug fixes that were not found to be important enough
  to be submitted before the merge window or backported into stable
  kernels.

  The vast majority of these came out of Arnd's randconfig testing and
  just prevents running into build-time bugs in configurations that we
  do not care about in practice"

* tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: at91: fix a typo
  ARM: moxart: fix CPU selection
  ARM: tegra: fix board DT pinmux setup
  ARM: nspire: Fix compiler warning
  IXP4xx: Fix DMA masks.
  Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"
  IXP4xx: Fix Goramo Multilink GPIO conversion.
  Revert "ARM: ixp4xx: fix gpio rework"
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ...

irqchip: sun7i/sun6i: Disable NMI before registering the handler

2014-03-31T09:12:57+00:00

It is advisable to disable the NMI before registering the IRQ handler as
registering the IRQ handler unmasks the IRQ on the GIC, so if U-Boot has
left the NMI enabled and the NMI pin is active we will immediately get
an interrupt before any driver has claimed the downstream interrupt of
the NMI.

Signed-off-by: Hans de Goede 
Signed-off-by: Carlo Caione 
Cc: maxime.ripard@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Link: http://lkml.kernel.org/r/1395939759-11135-3-git-send-email-carlo@caione.org
Signed-off-by: Thomas Gleixner

ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller

2014-03-26T00:00:50+00:00

Allwinner A20/A31 SoCs have special registers to control / (un)mask /
acknowledge NMI. This NMI controller is separated and independent from GIC.
This patch adds a new irqchip to manage NMI.

Signed-off-by: Carlo Caione 
Acked-by: Maxime Ripard 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Cc: mark.rutland@arm.com
Cc: hdegoede@redhat.com
Link: http://lkml.kernel.org/r/1395256879-8475-2-git-send-email-carlo@caione.org
Signed-off-by: Thomas Gleixner

irqchip: sun4i: Simplify sun4i_irq_ack

2014-03-19T11:34:29+00:00

Now that we only ack irq 0 the code can be simplified a lot.

Also switch from read / modify / write to a simple write clear:
1) This is what the android code does (it has a hack for acking irq 0
   in its unmask code doing this)

2) read / modify / write simply does not make sense for an irq status
   register like this, if the other bits are writeable (and the data sheet says
   they are not) they should be write 1 to clear, since otherwise a read /
   modify / write can race with a device raising an interrupt and then clear
   the pending bit unintentionally

Signed-off-by: Hans de Goede 
Acked-by: Maxime Ripard 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Link: http://lkml.kernel.org/r/1394895894-8891-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner

irqchip: sun4i: Use handle_fasteoi_irq for all interrupts

2014-03-19T11:34:29+00:00

Since the sun4i irq chip does not require any action and clears the interrupt
when the level goes back to inactive, we don't need to mask / unmask for
non oneshot IRQs, to achieve this we make sun4i_irq_ack a nop for all irqs
except irq 0 and use handle_fasteoi_irq for all interrupts.

Now there might be a case when the device reactivates the interrupt
before the RETI. But that does not matter as we run the primary
interrupt handlers with interrupts disabled.

This also allows us to get rid of needing to use 2 irq_chip structs, this
means that the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED will now influence
all interrupts rather then just irq 0, but that does not matter as the eoi
is now a nop anyways for all interrupts but irq 0.

Signed-off-by: Hans de Goede 
Acked-by: Maxime Ripard 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Link: http://lkml.kernel.org/r/1394895894-8891-2-git-send-email-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner

Merge tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical

2014-03-17T14:31:30+00:00

Merge "omap fixes for v3.15 merge window" from Tony Lindgren:

Fixes for omaps that would be good to get in before v3.15-rc1.

* tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: correct the idlemodes for spinlock
  ARM: dts: am33xx: correcting dt node unit address for usb
  ARM: dts: omap4/5: Use l3_ick for the gpmc node
  CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks
  ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM
  ARM: OMAP2+: INTC: Acknowledge stuck active interrupts

Signed-off-by: Arnd Bergmann

irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0

2014-03-14T12:43:33+00:00

All IRQs except for IRQ 0 seem to not need acking, so drop acking for them.

The ENMI needs to have the ack done *after* clearing the interrupt source,
otherwise we will get a spurious interrupt for each real interrupt.

So use the new IRQCHIP_EOI_THREADED flag for this in combination with
handle_fasteoi_irq. This uses a separate irq_chip struct for IRQ 0,
since we only want this behavior for IRQ 0.

Signed-off-by: Hans de Goede 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Cc: Maxime Ripard 
Link: http://lkml.kernel.org/r/1394733834-26839-5-git-send-email-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner