linux-toradex.git/drivers/irqchip, branch v3.18.10 Linux kernel for Apalis and Colibri modules irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type 2015-01-30T01:40:45+00:00 Gavin Li git@thegavinli.com 2015-01-07T02:47:23+00:00 449af2873ea16ef0da68bf64dcef78048d4427d1 commit 91d1179212161f220938198b742c328ad38fd0a3 upstream. This patch makes the bitmask for AIC_SRCTYPE consistent with that of its valid values, and prevents the priority field at bits 2:0 from being clobbered by an incorrect AND with the AIC_SRCTYPE mask. Signed-off-by: Gavin Li <gavinli@thegavinli.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Link: https://lkml.kernel.org/r/1420598843-8409-1-git-send-email-gavinli@thegavinli.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 91d1179212161f220938198b742c328ad38fd0a3 upstream.

This patch makes the bitmask for AIC_SRCTYPE consistent
with that of its valid values, and prevents the priority
field at bits 2:0 from being clobbered by an incorrect
AND with the AIC_SRCTYPE mask.

Signed-off-by: Gavin Li <gavinli@thegavinli.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lkml.kernel.org/r/1420598843-8409-1-git-send-email-gavinli@thegavinli.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip: omap-intc: Fix legacy DMA regression 2015-01-30T01:40:44+00:00 Felipe Balbi balbi@ti.com 2015-01-06T20:38:08+00:00 cfaa6851b052bc98519e8ba2d5a95bf30ff8ee48 commit 4b149e417463bbb6d1d9b805f729627ca2b54495 upstream. commit 55601c9f2467 (arm: omap: intc: switch over to linear irq domain) introduced a regression with SDMA legacy driver because that driver strictly depends on INTC's IRQs starting at NR_IRQs. Aparently irq_domain_add_linear() won't guarantee that, since we see a 7 IRQs difference when booting with and without the commit cited above. Until arch/arm/plat-omap/dma.c is properly fixed, we must maintain OMAP2/3 using irq_domain_add_legacy(). A FIXME note was added so people know to delete that code once that legacy DMA driver is fixed up. Fixes: 55601c9f2467 (arm: omap: intc: switch over to linear irq domain) Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4b149e417463bbb6d1d9b805f729627ca2b54495 upstream.

commit 55601c9f2467 (arm: omap: intc: switch over
to linear irq domain) introduced a regression with
SDMA legacy driver because that driver strictly depends
on INTC's IRQs starting at NR_IRQs. Aparently
irq_domain_add_linear() won't guarantee that, since we see
a 7 IRQs difference when booting with and without the
commit cited above.

Until arch/arm/plat-omap/dma.c is properly fixed, we
must maintain OMAP2/3 using irq_domain_add_legacy().

A FIXME note was added so people know to delete that
code once that legacy DMA driver is fixed up.

Fixes: 55601c9f2467 (arm: omap: intc: switch over to linear irq domain)
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map 2014-11-26T06:28:42+00:00 Dmitry Torokhov dtor@chromium.org 2014-11-14T22:16:42+00:00 d99ba4465a08138966083d6c256b2f66e85a5095 Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
Return value of irq_of_parse_and_map() is unsigned int, with 0
indicating failure, so testing for negative result never works.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Kevin Cernekee <cernekee@gmail.com> 
Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map 2014-11-26T06:26:38+00:00 Dmitry Torokhov dtor@chromium.org 2014-11-14T22:16:14+00:00 714710e1a2f6528be83d0f1c6cdf1e79a676d234 Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
Return value of irq_of_parse_and_map() is unsigned int, with 0
indicating failure, so testing for negative result never works.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Kevin Cernekee <cernekee@gmail.com>
Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
irqchip: atmel-aic: Fix irqdomain initialization 2014-11-11T22:34:48+00:00 Boris Brezillon boris.brezillon@free-electrons.com 2014-11-11T13:33:36+00:00 45977fe35bf014f5cf9552717e1320783398ae0d First of all IRQCHIP_SKIP_SET_WAKE is not a valid irq_gc_flags and thus should not be passed as the last argument of irq_alloc_domain_generic_chips. Then pass the correct handler (handle_fasteoi_irq) to irq_alloc_domain_generic_chips instead of manually re-setting it in the initialization loop. And eventually initialize default irq flags to the pseudo standard: IRQ_REQUEST | IRQ_PROBE | IRQ_AUTOEN. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Kevin Hilman <khilman@linaro.org> Fixes: b1479ebb77200 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Cc: <stable@vger.kernel.org> # v3.17+ Link: https://lkml.kernel.org/r/1415712816-9202-1-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
First of all IRQCHIP_SKIP_SET_WAKE is not a valid irq_gc_flags and thus
should not be passed as the last argument of
irq_alloc_domain_generic_chips.

Then pass the correct handler (handle_fasteoi_irq) to
irq_alloc_domain_generic_chips instead of manually re-setting it in the
initialization loop.

And eventually initialize default irq flags to the pseudo standard:
IRQ_REQUEST | IRQ_PROBE | IRQ_AUTOEN.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Fixes: b1479ebb77200 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Cc: <stable@vger.kernel.org> # v3.17+
Link: https://lkml.kernel.org/r/1415712816-9202-1-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
irqchip: armada-370-xp: Fix MPIC interrupt handling 2014-11-02T01:31:10+00:00 Grzegorz Jaszczyk jaz@semihalf.com 2014-09-25T11:17:19+00:00 758e8366754d3fa57da978fef9d2c652f7b55c02 In both Armada-375 and Armada-38x MPIC interrupts should be identified by reading cause register multiplied by the interrupt mask. A lack of above mentioned multiplication resulted in a bug, caused by the fact that in Armada-375 and Armada-38x some of the interrupts (e.g. network interrupts) can be handled either as a GIC or MPIC interrupts. Therefore during MPIC interrupts handling, cause register shows hits from interrupts even if they are masked for MPIC but unmasked for a GIC. This resulted in 'bad IRQ' error, because masked MPIC interrupt without registered interrupt handler, was trying to be handled during interrupt handling procedure of some other unmasked MPIC interrupt (e.g. local timer irq). This commit fixes that by ensuring that during MPIC interrupt handling only interrupts that are unmasked for MPIC are processed. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: bc69b8adfe22 ("irqchip: armada-370-xp: Setup a chained handler for the MPIC") Cc: <stable@vger.kernel.org> # v3.15+ Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1411643839-64925-3-git-send-email-jaz@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
In both Armada-375 and Armada-38x MPIC interrupts should be identified by
reading cause register multiplied by the interrupt mask.

A lack of above mentioned multiplication resulted in a bug, caused by the
fact that in Armada-375 and Armada-38x some of the interrupts
(e.g. network interrupts) can be handled either as a GIC or MPIC interrupts.
Therefore during MPIC interrupts handling, cause register shows hits from
interrupts even if they are masked for MPIC but unmasked for a GIC.

This resulted in 'bad IRQ' error, because masked MPIC interrupt without
registered interrupt handler, was trying to be handled during interrupt
handling procedure of some other unmasked MPIC interrupt (e.g. local timer
irq).

This commit fixes that by ensuring that during MPIC interrupt handling only
interrupts that are unmasked for MPIC are processed.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: bc69b8adfe22 ("irqchip: armada-370-xp: Setup a chained handler for the MPIC")
Cc: <stable@vger.kernel.org> # v3.15+
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1411643839-64925-3-git-send-email-jaz@semihalf.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
irqchip: armada-370-xp: Fix MSI interrupt handling 2014-11-02T01:31:10+00:00 Grzegorz Jaszczyk jaz@semihalf.com 2014-09-25T11:17:18+00:00 298dcb2dd0267d51e4f7c94a628cd0765a50ad75 The MSI interrupts use the 16 high doorbells, which are notified by using IRQ1 of the main interrupt controller. The MSI interrupts were handled correctly for Armada-XP and Armada-370 but not for Armada-375 and Armada-38x, which use chained handler for the MPIC. This commit fixes that by checking proper interrupt number in chained handler for the MPIC. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: bc69b8adfe22 ("irqchip: armada-370-xp: Setup a chained handler for the MPIC") Cc: <stable@vger.kernel.org> # v3.15+ Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1411643839-64925-2-git-send-email-jaz@semihalf.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 
The MSI interrupts use the 16 high doorbells, which are notified by using IRQ1
of the main interrupt controller.

The MSI interrupts were handled correctly for Armada-XP and Armada-370 but not
for Armada-375 and Armada-38x, which use chained handler for the MPIC.

This commit fixes that by checking proper interrupt number in chained handler
for the MPIC.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: bc69b8adfe22 ("irqchip: armada-370-xp: Setup a chained handler for the MPIC")
Cc: <stable@vger.kernel.org> # v3.15+
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1411643839-64925-2-git-send-email-jaz@semihalf.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu 2014-10-15T05:48:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-15T05:48:18+00:00 0429fbc0bdc297d64188483ba029a23773ae07b0 Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ... 
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2014-10-09T19:03:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-09T19:03:49+00:00 80213c03c4151d900cf293ef0fc51f8d88495e14 Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi 
Pull PCI updates from Bjorn Helgaas:
 "The interesting things here are:

   - Turn on Config Request Retry Status Software Visibility.  This
     caused hangs last time, but we included a fix this time.
   - Rework PCI device configuration to use _HPP/_HPX more aggressively
   - Allow PCI devices to be put into D3cold during system suspend
   - Add arm64 PCI support
   - Add APM X-Gene host bridge driver
   - Add TI Keystone host bridge driver
   - Add Xilinx AXI host bridge driver

  More detailed summary:

  Enumeration
    - Check Vendor ID only for Config Request Retry Status (Rajat Jain)
    - Enable Config Request Retry Status when supported (Rajat Jain)
    - Add generic domain handling (Catalin Marinas)
    - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)

  Resource management
    - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
    - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Move _HPP & _HPX handling into core (Bjorn Helgaas)
    - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
    - Apply _HPP/_HPX to display devices (Bjorn Helgaas)
    - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
    - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
    - Fix wait time in pciehp timeout message (Yinghai Lu)
    - Add more pciehp Slot Control debug output (Yinghai Lu)
    - Stop disabling pciehp notifications during init (Yinghai Lu)

  MSI
    - Remove arch_msi_check_device() (Alexander Gordeev)
    - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
    - Move D0 check into pci_msi_check_device() (Alexander Gordeev)
    - Remove unused kobject from struct msi_desc (Yijing Wang)
    - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
    - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
    - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
    - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
    - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)

  Power management
    - Drop unused runtime PM support code for PCIe ports (Rafael J.  Wysocki)
    - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)

  AER
    - Add additional AER error strings (Gong Chen)
    - Make <linux/aer.h> standalone includable (Thierry Reding)

  Virtualization
    - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
    - Add ACS quirk for Intel 10G NICs (Alex Williamson)
    - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
    - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
    - Add device flag helpers (Ethan Zhao)
    - Assume all Mellanox devices have broken INTx masking (Gavin Shan)

  Generic host bridge driver
    - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
    - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
    - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
    - Fix the conversion of IO ranges into IO resources (Liviu Dudau)
    - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
    - Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
    - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
    - Add arm64 architectural support for PCI (Liviu Dudau)

  APM X-Gene
    - Add APM X-Gene PCIe driver (Tanmay Inamdar)
    - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)

  Freescale i.MX6
    - Probe in module_init(), not fs_initcall() (Lucas Stach)
    - Delay enabling reference clock for SS until it stabilizes (Tim Harvey)

  Marvell MVEBU
    - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)

  NVIDIA Tegra
    - Make sure the PCIe PLL is really reset (Eric Yuen)
    - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
    - Fix extended configuration space mapping (Peter Daifuku)
    - Implement resource hierarchy (Thierry Reding)
    - Clear CLKREQ# enable on port disable (Thierry Reding)
    - Add Tegra124 support (Thierry Reding)

  ST Microelectronics SPEAr13xx
    - Pass config resource through reg property (Pratyush Anand)

  Synopsys DesignWare
    - Use NULL instead of false (Fabio Estevam)
    - Parse bus-range property from devicetree (Lucas Stach)
    - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
    - Remove pci_assign_unassigned_resources() (Lucas Stach)
    - Check private_data validity in single place (Lucas Stach)
    - Setup and clear exactly one MSI at a time (Lucas Stach)
    - Remove open-coded bitmap operations (Lucas Stach)
    - Fix configuration base address when using 'reg' (Minghuan Lian)
    - Fix IO resource end address calculation (Minghuan Lian)
    - Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
    - Add get_msi_data() to pcie_host_ops (Minghuan Lian)
    - Add support for v3.65 hardware (Murali Karicheri)
    - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)

  TI Keystone
    - Add TI Keystone PCIe driver (Murali Karicheri)
    - Limit MRSS for all downstream devices (Murali Karicheri)
    - Assume controller is already in RC mode (Murali Karicheri)
    - Set device ID based on SoC to support multiple ports (Murali Karicheri)

  Xilinx AXI
    - Add Xilinx AXI PCIe driver (Srikanth Thokala)
    - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)

  Miscellaneous
    - Clean up whitespace (Quentin Lambert)
    - Remove assignments from "if" conditions (Quentin Lambert)
    - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
    - x86: Mark DMI tables as initialization data (Mathias Krause)
    - x86: Move __init annotation to the correct place (Mathias Krause)
    - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
    - x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
    - x86: Mark PCI BIOS initialization code as such (Mathias Krause)
    - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
    - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"

* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
  arm64: dts: Add APM X-Gene PCIe device tree nodes
  PCI: Add ACS quirk for AMD A88X southbridge devices
  PCI: xgene: Add APM X-Gene PCIe driver
  PCI: designware: Remove open-coded bitmap operations
  PCI/MSI: Remove unnecessary temporary variable
  PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
  MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
  PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
  PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
  PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
  PCI/MSI: Remove unused kobject from struct msi_desc
  PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
  PCI/MSI: Move D0 check into pci_msi_check_device()
  PCI/MSI: Remove arch_msi_check_device()
  irqchip: armada-370-xp: Remove arch_msi_check_device()
  PCI/MSI/PPC: Remove arch_msi_check_device()
  arm64: Add architectural support for PCI
  PCI: Add pci_remap_iospace() to map bus I/O resources
  of/pci: Add support for parsing PCI host bridge resources from DT
  of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
  ...

Conflicts:
	arch/arm64/boot/dts/apm-storm.dtsi
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-10-09T10:42:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-10-09T10:42:04+00:00 782d59c5dfc5ac39ac8cfb4c6dd40597938dde9c Pull irq updates from Thomas Gleixner: "The irq departement delivers: - a cleanup series to get rid of mindlessly copied code. - another bunch of new pointlessly different interrupt chip drivers. Adding homebrewn irq chips (and timers) to SoCs must provide a value add which is beyond the imagination of mere mortals. - the usual SoC irq controller updates, IOW my second cat herding project" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: gic-v3: Implement CPU PM notifier irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling irqchip: renesas-intc-irqpin: Add minimal runtime PM support irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev irqchip: atmel-aic5: Add sama5d4 support irqchip: atmel-aic5: The sama5d3 has 48 IRQs Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs irqchip: renesas-irqc: Add DT binding documentation irqchip: renesas-intc-irqpin: Document SoC-specific bindings openrisc: Get rid of handle_IRQ arm64: Get rid of handle_IRQ ARM: omap2: irq: Convert to handle_domain_irq ARM: imx: tzic: Convert to handle_domain_irq ARM: imx: avic: Convert to handle_domain_irq irqchip: or1k-pic: Convert to handle_domain_irq irqchip: atmel-aic5: Convert to handle_domain_irq irqchip: atmel-aic: Convert to handle_domain_irq irqchip: gic-v3: Convert to handle_domain_irq ... 
Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - a cleanup series to get rid of mindlessly copied code.

   - another bunch of new pointlessly different interrupt chip drivers.

     Adding homebrewn irq chips (and timers) to SoCs must provide a
     value add which is beyond the imagination of mere mortals.

   - the usual SoC irq controller updates, IOW my second cat herding
     project"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  irqchip: gic-v3: Implement CPU PM notifier
  irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling
  irqchip: renesas-intc-irqpin: Add minimal runtime PM support
  irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev
  irqchip: atmel-aic5: Add sama5d4 support
  irqchip: atmel-aic5: The sama5d3 has 48 IRQs
  Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding
  irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller
  irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs
  irqchip: renesas-irqc: Add DT binding documentation
  irqchip: renesas-intc-irqpin: Document SoC-specific bindings
  openrisc: Get rid of handle_IRQ
  arm64: Get rid of handle_IRQ
  ARM: omap2: irq: Convert to handle_domain_irq
  ARM: imx: tzic: Convert to handle_domain_irq
  ARM: imx: avic: Convert to handle_domain_irq
  irqchip: or1k-pic: Convert to handle_domain_irq
  irqchip: atmel-aic5: Convert to handle_domain_irq
  irqchip: atmel-aic: Convert to handle_domain_irq
  irqchip: gic-v3: Convert to handle_domain_irq
  ...