linux-toradex.git/drivers/isdn, branch v4.12-rc1 Linux kernel for Apalis and Colibri modules Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs 2017-05-11T02:13:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-11T02:13:03+00:00 291b38a7565b41676cafd1b4052315a94d9c8977 Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ... 
Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...
Annotate hardware config module parameters in drivers/isdn/ 2017-04-20T11:02:32+00:00 David Howells dhowells@redhat.com 2017-04-04T15:54:24+00:00 b9351f7e51dbbf1d850281142a55d848301d482d When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/isdn/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: Karsten Keil <isdn@linux-pingi.de> cc: netdev@vger.kernel.org 
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/isdn/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Karsten Keil <isdn@linux-pingi.de>
cc: netdev@vger.kernel.org
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-04-06T15:24:51+00:00 David S. Miller davem@davemloft.net 2017-04-06T14:25:07+00:00 6f14f443d3e773439fb9cc6f2685ba90d5d026c5 Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net> 
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).

Signed-off-by: David S. Miller <davem@davemloft.net>
isdn: kcapi: avoid uninitialized data 2017-03-29T00:59:33+00:00 Arnd Bergmann arnd@arndb.de 2017-03-28T10:11:07+00:00 af109a2cf6a9a6271fa420ae2d64d72d86c92b7d gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized value ending up in the cardnr parameter: drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer': drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized] cparams.cardnr = cdef.cardnr; This has been broken since before the start of the git history, so either the value is not used for anything important, or the ioctl command doesn't get called in practice. Setting the cardnr to zero avoids the warning and makes sure we have consistent behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
isdn: use setup_timer 2017-03-24T19:33:42+00:00 Geliang Tang geliangtang@gmail.com 2017-03-23T13:15:57+00:00 aff55a3638a2d13de5cf0b0c45993378282cbe91 Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
isdn: hardware: mISDN: Remove reference to CONFIG_8xx 2017-03-16T18:15:14+00:00 Christophe Leroy christophe.leroy@c-s.fr 2017-03-16T09:18:02+00:00 b79df0fc60c5b459ac7ba60c03467d672745954b CONFIG_8xx is deprecated and should soon be removed in favor of CONFIG_PPC_8xx. Anyway, hfc_multi_8xx.h only uses 8xx I/O ports which are linked to the CPM1 communication processor included in the 8xx rather than the 8xx itself. This patch therefore makes it dependent on CONFIG_CPM1 instead, like several other drivers. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 
CONFIG_8xx is deprecated and should soon be removed in favor
of CONFIG_PPC_8xx.
Anyway, hfc_multi_8xx.h only uses 8xx I/O ports which are
linked to the CPM1 communication processor included in the 8xx
rather than the 8xx itself.

This patch therefore makes it dependent on CONFIG_CPM1 instead,
like several other drivers.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-03-15T04:31:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-03-15T04:31:23+00:00 ae50dfd61665086e617cc9e554a1285d52765670 Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ... 
Pull networking fixes from David Miller:

 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
    from Steffen Klassert.

 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
    Alexei Starovoitov.

 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
    Michal Schmidt.

 4) We can get a divide by zero when TCP socket are morphed into
    listening state, fix from Eric Dumazet.

 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
    skb_complete_tx_timestamp(). From Eric Dumazet.

 6) Use after free in dccp_feat_activate_values(), also from Eric
    Dumazet.

 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
    Jarod Wilson.

 8) Fix use after free in vrf_xmit(), from David Ahern.

 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
    Alexey Kodanev.

10) Properly check napi_complete_done() return value in order to decide
    whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
    Lendacky.

11) Fix double free of hwmon device in marvell phy driver, from Andrew
    Lunn.

12) Don't crash on malformed netlink attributes in act_connmark, from
    Etienne Noss.

13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
    from Sabrina Dubroca.

14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
    Florian Westphal.

15) Fix routing redirect races in dccp and tcp, basically the ICMP
    handler can't modify the socket's cached route in it's locked by the
    user at this moment. From Jon Maxwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
  qed: Enable iSCSI Out-of-Order
  qed: Correct out-of-bound access in OOO history
  qed: Fix interrupt flags on Rx LL2
  qed: Free previous connections when releasing iSCSI
  qed: Fix mapping leak on LL2 rx flow
  qed: Prevent creation of too-big u32-chains
  qed: Align CIDs according to DORQ requirement
  mlxsw: reg: Fix SPVMLR max record count
  mlxsw: reg: Fix SPVM max record count
  net: Resend IGMP memberships upon peer notification.
  dccp: fix memory leak during tear-down of unsuccessful connection request
  tun: fix premature POLLOUT notification on tun devices
  dccp/tcp: fix routing redirect race
  ucc/hdlc: fix two little issue
  vxlan: fix ovs support
  net: use net->count to check whether a netns is alive or not
  bridge: drop netfilter fake rtable unconditionally
  ipv6: avoid write to a possibly cloned skb
  net: wimax/i2400m: fix NULL-deref at probe
  isdn/gigaset: fix NULL-deref at probe
  ...
isdn/gigaset: fix NULL-deref at probe 2017-03-13T19:28:40+00:00 Johan Hovold johan@kernel.org 2017-03-13T12:39:01+00:00 68c32f9c2a36d410aa242e661506e5b2c2764179 Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection") Cc: stable <stable@vger.kernel.org> # 2.6.17 Cc: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers -
direct USB connection")
Cc: stable <stable@vger.kernel.org>	# 2.6.17
Cc: Hansjoerg Lipp <hjlipp@web.de>

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
scripts/spelling.txt: add "disble(d)" pattern and fix typo instances 2017-03-10T01:01:09+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2017-03-10T00:16:31+00:00 8a1115ff6b6d90cf1066ec3a0c4e51276553eebe Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sched/headers: Prepare to move cputime functionality from <linux/sched.h> into <linux/sched/cputime.h> 2017-03-02T07:42:39+00:00 Ingo Molnar mingo@kernel.org 2017-02-05T10:48:36+00:00 32ef5517c298042ed58408545f475df43afe1f24 Introduce a trivial, mostly empty <linux/sched/cputime.h> header to prepare for the moving of cputime functionality out of sched.h. Update all code that relies on these facilities. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Introduce a trivial, mostly empty <linux/sched/cputime.h> header
to prepare for the moving of cputime functionality out of sched.h.

Update all code that relies on these facilities.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>