linux-toradex.git/drivers/isdn, branch v4.9.128

isdn: Disable IIOCDBGVAR

2018-08-22T05:47:14+00:00

[ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ]

It was possible to directly leak the kernel address where the isdn_dev
structure pointer was stored. This is a kernel ASLR bypass for anyone
with access to the ioctl. The code had been present since the beginning
of git history, though this shouldn't ever be needed for normal operation,
therefore remove it.

Reported-by: Al Viro 
Cc: Karsten Keil 
Signed-off-by: Kees Cook 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

isdn: eicon: fix a missing-check bug

2018-06-13T14:16:42+00:00

[ Upstream commit 6009d1fe6ba3bb2dab55921da60465329cc1cd89 ]

In divasmain.c, the function divas_write() firstly invokes the function
diva_xdi_open_adapter() to open the adapter that matches with the adapter
number provided by the user, and then invokes the function diva_xdi_write()
to perform the write operation using the matched adapter. The two functions
diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c.

In diva_xdi_open_adapter(), the user command is copied to the object 'msg'
from the userspace pointer 'src' through the function pointer 'cp_fn',
which eventually calls copy_from_user() to do the copy. Then, the adapter
number 'msg.adapter' is used to find out a matched adapter from the
'adapter_queue'. A matched adapter will be returned if it is found.
Otherwise, NULL is returned to indicate the failure of the verification on
the adapter number.

As mentioned above, if a matched adapter is returned, the function
diva_xdi_write() is invoked to perform the write operation. In this
function, the user command is copied once again from the userspace pointer
'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as
both of them are from the 'buf' pointer in divas_write(). Similarly, the
copy is achieved through the function pointer 'cp_fn', which finally calls
copy_from_user(). After the successful copy, the corresponding command
processing handler of the matched adapter is invoked to perform the write
operation.

It is obvious that there are two copies here from userspace, one is in
diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of
these two copies share the same source userspace pointer, i.e., the 'buf'
pointer in divas_write(). Given that a malicious userspace process can race
to change the content pointed by the 'buf' pointer, this can pose potential
security issues. For example, in the first copy, the user provides a valid
adapter number to pass the verification process and a valid adapter can be
found. Then the user can modify the adapter number to an invalid number.
This way, the user can bypass the verification process of the adapter
number and inject inconsistent data.

This patch reuses the data copied in
diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the
above issues can be avoided.

Signed-off-by: Wenwen Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mISDN: Fix a sleep-in-atomic bug

2018-04-13T17:48:17+00:00

[ Upstream commit 93818da5eed63fbc17b64080406ea53b86b23309 ]

The driver may sleep under a read spin lock, and the function call path is:
send_socklist (acquire the lock by read_lock)
  skb_copy(GFP_KERNEL) --> may sleep

To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".

Signed-off-by: Jia-Ju Bai 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ISDN: eicon: reduce stack size of sig_ind function

2018-02-25T10:05:55+00:00

commit 27d807180ae0a9e50d90adf9b22573c21be904c2 upstream.

I noticed that this function uses a lot of kernel stack when the
"latent entropy" plugin is enabled:

drivers/isdn/hardware/eicon/message.c: In function 'sig_ind':
drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]

We currently don't warn about this, as we raise the warning limit
to 2048 bytes in mainline, but I'd like to lower that limit again
in the future, and this function can easily be changed to be more
efficient and avoid that warning, by making some of its local
variables 'const'.

Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

isdn: kcapi: avoid uninitialized data

2017-12-25T13:23:42+00:00

[ Upstream commit af109a2cf6a9a6271fa420ae2d64d72d86c92b7d ]

gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

isdn/i4l: fetch the ppp_write buffer in one shot

2017-10-12T09:51:21+00:00

[ Upstream commit 02388bf87f72e1d47174cd8f81c34443920eb5a0 ]

In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is
fetched twice from userspace. The first fetch is used to peek at the
protocol of the message and reset the huptimer if necessary; while the
second fetch copies in the whole buffer. However, given that buf resides
in userspace memory, a user process can race to change its memory content
across fetches. By doing so, we can either avoid resetting the huptimer
for any type of packets (by first setting proto to PPP_LCP and later
change to the actual type) or force resetting the huptimer for LCP
packets.

This patch changes this double-fetch behavior into two single fetches
decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0).
A more detailed discussion can be found at
https://marc.info/?l=linux-kernel&m=150586376926123&w=2

Signed-off-by: Meng Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

isdn/i4l: fix buffer overflow

2017-08-07T01:59:42+00:00

commit 9f5af546e6acc30f075828cb58c7f09665033967 upstream.

This fixes a potential buffer overflow in isdn_net.c caused by an
unbounded strcpy.

[ ISDN seems to be effectively unmaintained, and the I4L driver in
  particular is long deprecated, but in case somebody uses this..
    - Linus ]

Signed-off-by: Jiten Thakkar 
Signed-off-by: Annie Cherkaev 
Cc: Karsten Keil 
Cc: Kees Cook 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

isdn: Fix a sleep-in-atomic bug

2017-08-07T01:59:42+00:00

commit e8f4ae85439f34bec3b0ab69223a41809dab28c9 upstream.

The driver may sleep under a spin lock, the function call path is:
isdn_ppp_mp_receive (acquire the lock)
  isdn_ppp_mp_reassembly
    isdn_ppp_push_higher
      isdn_ppp_decompress
        isdn_ppp_ccp_reset_trans
          isdn_ppp_ccp_reset_alloc_state
            kzalloc(GFP_KERNEL) --> may sleep

To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".

Signed-off-by: Jia-Ju Bai 
Signed-off-by: David S. Miller 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

isdn/gigaset: fix NULL-deref at probe

2017-03-26T11:05:58+00:00

commit 68c32f9c2a36d410aa242e661506e5b2c2764179 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection")
Cc: Hansjoerg Lipp 
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ISDN: eicon: silence misleading array-bounds warning

2017-02-01T07:33:06+00:00

commit 950eabbd6ddedc1b08350b9169a6a51b130ebaaf upstream.

With some gcc versions, we get a warning about the eicon driver,
and that currently shows up as the only remaining warning in one
of the build bots:

In file included from ../drivers/isdn/hardware/eicon/message.c:30:0:
eicon/message.c: In function 'mixer_notify_update':
eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds]

The code is easily changed to open-code the unusual PUT_WORD() line
causing this to avoid the warning.

Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman