linux-toradex.git/drivers/leds/Makefile, branch v5.5-rc7

leds: add LED driver for EL15203000 board

2019-11-03T16:37:06+00:00

This patch adds a LED class driver for the LEDs found on
the Crane Merchandising System EL15203000 LEDs board
(aka RED LEDs board).

Signed-off-by: Oleh Kravchenko 
Reviewed-by: Dan Murphy 
Signed-off-by: Pavel Machek

Merge tag 'ti-lmu-led-drivers' into for-next

2019-06-11T21:46:37+00:00

Merge immutable branch between LEDs, MFD and REGULATOR due to
TI LMU LED support rework and introduction of two new drivers
with DT bindings.

* tag 'ti-lmu-led-drivers':
  leds: lm36274: Introduce the TI LM36274 LED driver
  dt-bindings: leds: Add LED bindings for the LM36274
  regulator: lm363x: Add support for LM36274
  mfd: ti-lmu: Add LM36274 support to the ti-lmu
  dt-bindings: mfd: Add lm36274 bindings to ti-lmu
  leds: lm3697: Introduce the lm3697 driver
  mfd: ti-lmu: Remove support for LM3697
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  leds: TI LMU: Add common code for TI LMU devices
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  dt-bindings: mfd: LMU: Add the ramp up/down property

leds: lm36274: Introduce the TI LM36274 LED driver

2019-06-07T18:40:07+00:00

Introduce the LM36274 LED driver.  This driver uses the ti-lmu
MFD driver to probe this LED driver.  The driver configures only the
LED registers and enables the outputs according to the config file.

The driver utilizes the TI LMU (Lighting Management Unit) LED common
framework to set the brightness bits.

Signed-off-by: Dan Murphy 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: lm3697: Introduce the lm3697 driver

2019-05-24T20:40:47+00:00

Introduce the lm3697 LED driver for backlighting and display.

Datasheet location:
http://www.ti.com/lit/ds/symlink/lm3697.pdf

Signed-off-by: Dan Murphy 
Signed-off-by: Jacek Anaszewski

leds: TI LMU: Add common code for TI LMU devices

2019-05-24T20:40:45+00:00

Create a TI LMU common framework for TI LMU devices that share
common features.

Currently the runtime ramp and brightness setting have
been identified as common features with common register settings.

This work is derived from Milo Kims TI LMU MFD code.

Signed-off-by: Dan Murphy 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: spi-byte: add single byte SPI LED driver

2019-05-24T20:19:43+00:00

This driver adds support for simple SPI based LED controller which use
only one byte for setting the brightness.

Signed-off-by: Christian Mauderer 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged

2019-05-14T07:09:23+00:00

Immutable branch between MFD, ARM and Net due for the 5.2 merge window

leds: max77650: Add LEDs support

2019-05-08T11:07:02+00:00

This adds basic support for LEDs for the max77650 PMIC. The device has
three current sinks for driving LEDs.

Signed-off-by: Bartosz Golaszewski 
Acked-by: Jacek Anaszewski 
Acked-by: Pavel Machek 
Signed-off-by: Lee Jones

leds: lm3532: Introduce the lm3532 LED driver

2019-04-07T18:45:49+00:00

Introduce the Texas Instruments LM3532 White LED driver.
The driver supports ALS configurability or manual brightness
control.

The driver also supports associating LED strings with specific
control banks in a group or as individually controlled strings.

Signed-off-by: Dan Murphy 
Tested-by: Tony Lindgren 
Signed-off-by: Jacek Anaszewski

leds: add Panasonic AN30259A support

2018-09-10T19:31:11+00:00

AN30259A is a 3-channel LED driver which uses I2C. It supports timed
operation via an internal PWM clock, and variable brightness. This
driver offers support for basic hardware-based blinking and brightness
control.

The datasheet is freely available:
https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf

Signed-off-by: Simon Shields 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski