linux-toradex.git/drivers/leds/led-class.c, branch v3.1

leds: support automatic start of blinking with ledtrig-timer

2011-05-25T15:39:49+00:00

By setting initial values blink_delay_on and blink_delay_off in a
led_classdev struct, this change starts the blinking when the led is
initialized.

With this patch, you can initialize blink_delay_on and blink_delay_off in
led_classdev with default_trigger set to "timer", and the led will start
up blinking.  The current ledtrig-timer implementation ignores any initial
blink_delay_on/blink_delay_off settings, and requires setting
blink_delay_on/blink_delay_off (typically from userspace) before the led
blinks.

Signed-off-by: Esben Haabendal 
Cc: Richard Purdie 
Cc: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

led_class: fix typo in blink API

2010-12-23T03:43:34+00:00

When I added led_blink_set I had a typo: the return value of the hw
offload is a regular error code that is zero when succesful, and in that
case software emulation should not be used, rather than the other way
around.

Signed-off-by: Johannes Berg 
Cc: Richard Purdie 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

led-class: always implement blinking

2010-11-12T15:55:32+00:00

Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.

Signed-off-by: Johannes Berg 
Acked-by: Richard Purdie 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

leds: led-class: set permissions on max_brightness file to 0444

2010-05-26T12:07:55+00:00

max_brightness is not writable, thus set permissions to 0444.

Signed-off-by: Axel Lin 
Signed-off-by: Richard Purdie

leds: Fix race between LED device uevent and actual attributes creation

2010-03-16T20:27:25+00:00

If we were to dynamically register/unregister leds and have udev or other
daemons handle the leds class uevents, we would be notified of the adding of a
new LED and if the daemon immediately tries to open one of the attributes of
the led device, it would fail with a "no such file or directory" error since
this the attributes are not yet created. Fix this by switching attributes to be
class-wide, such that the driver core will register these attributes with
device_add_attrs and then emit the kobject_uevent ADD signal.

Signed-off-by:  Fainelli 
Signed-off-by: Richard Purdie

leds: led-class.c - Quiet boot messages

2010-03-16T19:49:21+00:00

As each led device gets registered a kernel message gets printed. In
an embedded system with a number of leds this can produce a lot
of output that just looks like noise.

Change the message type to KERN_DEBUG since it might be useful
in the dmesg output "after" booting.

Signed-off-by: H Hartley Sweeten 
Signed-off-by: Richard Purdie

tree-wide: convert open calls to remove spaces to skip_spaces() lib function

2009-12-15T16:53:32+00:00

Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.

It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
   text    data     bss     dec     hex filename
  64688     584     592   65864   10148 (TOTALS-BEFORE)
  64641     584     592   65817   10119 (TOTALS-AFTER)

Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".

Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
    drivers/leds/led-class.c
    drivers/leds/ledtrig-timer.c
    drivers/video/output.c

@@
expression str;
@@

( // ignore skip_spaces cases
while (*str &&  isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)

Signed-off-by: André Goddard Rosa 
Cc: Julia Lawall 
Cc: Martin Schwidefsky 
Cc: Jeff Dike 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Richard Purdie 
Cc: Neil Brown 
Cc: Kyle McMartin 
Cc: Henrique de Moraes Holschuh 
Cc: David Howells 
Cc: 
Cc: Samuel Ortiz 
Cc: Patrick McHardy 
Cc: Takashi Iwai 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

leds: allow led-drivers to use a variable range of brightness values

2009-04-06T15:06:25+00:00

This patch allows drivers to override the default maximum brightness value
of 255.  We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Richard Purdie

leds: Add suspend/resume to the core class

2009-01-08T17:55:03+00:00

Add suspend/resume to the core class and remove all the now unneeded
code from various drivers. Originally the class code couldn't support
suspend/resume but since class_device can there is no reason for
each driver doing its own suspend/resume anymore.

leds: Fixup kdoc comment to match parameter names

2009-01-08T12:38:57+00:00

Signed-off-by: Sven Wegener 
Signed-off-by: Richard Purdie