<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/lightnvm/gennvm.h, branch v4.9.98</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>lightnvm: move target mgmt into media mgr</title>
<updated>2016-07-07T14:51:52+00:00</updated>
<author>
<name>Matias Bjørling</name>
<email>m@bjorling.me</email>
</author>
<published>2016-07-07T07:54:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b76eb20bb0c6f4f9c2e1ad493f73c52817b8aaff'/>
<id>b76eb20bb0c6f4f9c2e1ad493f73c52817b8aaff</id>
<content type='text'>
To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.

Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.

Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lightnvm: rename gennvm and update description</title>
<updated>2016-07-07T14:51:52+00:00</updated>
<author>
<name>Matias Bjørling</name>
<email>m@bjorling.me</email>
</author>
<published>2016-07-07T07:54:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5e60edb7dcedd6bdcf946ba765f51e8d363d65a8'/>
<id>5e60edb7dcedd6bdcf946ba765f51e8d363d65a8</id>
<content type='text'>
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lightnvm: specify target's logical address area</title>
<updated>2016-03-19T01:10:37+00:00</updated>
<author>
<name>Wenwei Tao</name>
<email>ww.tao0320@gmail.com</email>
</author>
<published>2016-03-03T14:06:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4c9dacb82d5aa36aa2568df60d897f2eb3d8819b'/>
<id>4c9dacb82d5aa36aa2568df60d897f2eb3d8819b</id>
<content type='text'>
We can create more than one target on a lightnvm
device by specifying its begin lun and end lun.

But only specify the physical address area is not
enough, we need to get the corresponding non-
intersection logical address area division from
the backend device's logcial address space.
Otherwise the targets on the device might use
the same logical addresses cause incorrect
information in the device's l2p table.

Signed-off-by: Wenwei Tao &lt;ww.tao0320@gmail.com&gt;
Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We can create more than one target on a lightnvm
device by specifying its begin lun and end lun.

But only specify the physical address area is not
enough, we need to get the corresponding non-
intersection logical address area division from
the backend device's logcial address space.
Otherwise the targets on the device might use
the same logical addresses cause incorrect
information in the device's l2p table.

Signed-off-by: Wenwei Tao &lt;ww.tao0320@gmail.com&gt;
Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lightnvm: update bad block table format</title>
<updated>2015-11-16T22:20:25+00:00</updated>
<author>
<name>Matias Bjørling</name>
<email>m@bjorling.me</email>
</author>
<published>2015-11-16T14:34:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=11450469830f2481a9e7cb181609288d40f41323'/>
<id>11450469830f2481a9e7cb181609288d40f41323</id>
<content type='text'>
The specification was changed to reflect a multi-value bad block table.
Instead of bit-based bad block table, the bad block table now allows
eight bad block categories. Currently four are defined:

 * Factory bad blocks
 * Grown bad blocks
 * Device-side reserved blocks
 * Host-side reserved blocks

The factory and grown bad blocks are the regular bad blocks. The
reserved blocks are either for internal use or external use. In
particular, the device-side reserved blocks allows the host to
bootstrap from a limited number of flash blocks. Reducing the flash
blocks to scan upon super block initialization.

Support for both get bad block table and set bad block table is added.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The specification was changed to reflect a multi-value bad block table.
Instead of bit-based bad block table, the bad block table now allows
eight bad block categories. Currently four are defined:

 * Factory bad blocks
 * Grown bad blocks
 * Device-side reserved blocks
 * Host-side reserved blocks

The factory and grown bad blocks are the regular bad blocks. The
reserved blocks are either for internal use or external use. In
particular, the device-side reserved blocks allows the host to
bootstrap from a limited number of flash blocks. Reducing the flash
blocks to scan upon super block initialization.

Support for both get bad block table and set bad block table is added.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>gennvm: Generic NVM manager</title>
<updated>2015-10-29T07:21:42+00:00</updated>
<author>
<name>Matias Bjørling</name>
<email>m@bjorling.me</email>
</author>
<published>2015-10-28T18:54:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=48add0f5a6f46919dd307575aad6ea3de7c9cb2a'/>
<id>48add0f5a6f46919dd307575aad6ea3de7c9cb2a</id>
<content type='text'>
The implementation for Open-Channel SSDs is divided into media
management and targets. This patch implements a generic media manager
for open-channel SSDs. After a media manager has been initialized,
single or multiple targets can be instantiated with the media managed as
the backend.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The implementation for Open-Channel SSDs is divided into media
management and targets. This patch implements a generic media manager
for open-channel SSDs. After a media manager has been initialized,
single or multiple targets can be instantiated with the media managed as
the backend.

Signed-off-by: Matias Bjørling &lt;m@bjorling.me&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
