linux-toradex.git/drivers/md/bcache, branch v4.9.20

bcache: Make gc wakeup sane, remove set_task_state()

2017-02-23T16:44:36+00:00

commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream.

Signed-off-by: Kent Overstreet 
Cc: Coly Li 
Signed-off-by: Greg Kroah-Hartman

block: export bio_free_pages to other modules

2016-09-22T13:48:03+00:00

bio_free_pages is introduced in commit 1dfa0f68c040
("block: add a helper to free bio bounce buffer pages"),
we can reuse the func in other modules after it was
imported.

Cc: Christoph Hellwig 
Cc: Jens Axboe 
Cc: Mike Snitzer 
Cc: Shaohua Li 
Signed-off-by: Guoqing Jiang 
Acked-by: Kent Overstreet 
Signed-off-by: Jens Axboe

bcache: pr_err: more meaningful error message when nr_stripes is invalid

2016-08-19T03:31:03+00:00

The original error was thought to be corruption, but was actually caused by:
	make-bcache --data-offset N
where N was in bytes and should have been in sectors.  While userspace
tools should be updated to check --data-offset beyond end of volume,
hopefully this will help others that might not have noticed the units.

Signed-off-by: Eric Wheeler 
Cc: Kent Overstreet

bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.

2016-08-19T03:29:49+00:00

This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:

Allocator thread:
[  720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[  720.732361]  [] schedule+0x37/0x90
[  720.732963]  [] bch_bucket_alloc+0x188/0x360 [bcache]
[  720.733538]  [] ? prepare_to_wait_event+0xf0/0xf0
[  720.734137]  [] bch_prio_write+0x19d/0x340 [bcache]
[  720.734715]  [] bch_allocator_thread+0x3ff/0x470 [bcache]
[  720.735311]  [] ? __schedule+0x2dc/0x950
[  720.735884]  [] ? invalidate_buckets+0x980/0x980 [bcache]

Registration thread:
[  720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[  720.715226]  [] schedule+0x37/0x90
[  720.715805]  [] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[  720.716409]  [] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[  720.717008]  [] bch_btree_insert+0xf4/0x170 [bcache]
[  720.717586]  [] ? prepare_to_wait_event+0xf0/0xf0
[  720.718191]  [] bch_journal_replay+0x14a/0x290 [bcache]
[  720.718766]  [] ? ttwu_do_activate.constprop.94+0x5d/0x70
[  720.719369]  [] ? try_to_wake_up+0x1d4/0x350
[  720.719968]  [] run_cache_set+0x580/0x8e0 [bcache]
[  720.720553]  [] register_bcache+0xe2e/0x13b0 [bcache]
[  720.721153]  [] kobj_attr_store+0xf/0x20
[  720.721730]  [] sysfs_kf_write+0x3d/0x50
[  720.722327]  [] kernfs_fop_write+0x12a/0x180
[  720.722904]  [] __vfs_write+0x37/0x110
[  720.723503]  [] ? __sb_start_write+0x58/0x110
[  720.724100]  [] ? security_file_permission+0x23/0xa0
[  720.724675]  [] vfs_write+0xa9/0x1b0
[  720.725275]  [] ? do_audit_syscall_entry+0x6c/0x70
[  720.725849]  [] SyS_write+0x55/0xd0
[  720.726451]  [] ? do_page_fault+0x30/0x80
[  720.727045]  [] system_call_fastpath+0x12/0x71

The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.

Signed-off-by: Kent Overstreet 
Tested-by: Eric Wheeler 
Cc: stable@vger.kernel.org

bcache: register_bcache(): call blkdev_put() when cache_alloc() fails

2016-08-19T03:28:23+00:00

register_cache() is supposed to return an error string on error so that
register_bcache() will will blkdev_put and cleanup other user counters,
but it does not set 'char *err' when cache_alloc() fails (eg, due to
memory pressure) and thus register_bcache() performs no cleanup.

register_bcache() <----------\  <- no jump to err_close, no blkdev_put()
   |                         |
   +->register_cache()       |  <- fails to set char *err
         |                   |
         +->cache_alloc() ---/  <- returns error

This patch sets `char *err` for this failure case so that register_cache()
will cause register_bcache() to correctly jump to err_close and do
cleanup.  This was tested under OOM conditions that triggered the bug.

Signed-off-by: Eric Wheeler 
Cc: Kent Overstreet 
Cc: stable@vger.kernel.org

block: rename bio bi_rw to bi_opf

2016-08-07T20:41:02+00:00

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe

block: simplify and cleanup bvec pool handling

2016-07-20T23:37:02+00:00

Instead of a flag and an index just make sure an index of 0 means
no need to free the bvec array.  Also move the constants related
to the bvec pools together and use a consistent naming scheme for
them.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Mike Christie 
Signed-off-by: Jens Axboe

bcache: Remove redundant block_size assignment

2016-07-05T17:34:50+00:00

We have assigned sb->block_size before the switch,
so remove the redundant one.

Reviewed-by: Coly Li 
Signed-off-by: Yijing Wang 
Acked-by: Eric Wheeler 
Signed-off-by: Jens Axboe

bcache: update document info

2016-07-05T17:34:49+00:00

There is no return in continue_at(), update the documentation.

Signed-off-by: Yijing Wang 
Acked-by: Coly Li 
Signed-off-by: Jens Axboe

bcache: Remove redundant parameter for cache_alloc()

2016-07-05T17:34:47+00:00

Cache_sb is not used in cache_alloc, and we have copied
sb info to cache->sb already, remove it.

Reviewed-by: Coly Li 
Signed-off-by: Yijing Wang 
Signed-off-by: Jens Axboe