linux-toradex.git/drivers/md/dm-switch.c, branch v4.17

dm: remove fmode_t argument from .prepare_ioctl hook

2018-04-04T16:12:39+00:00

Use the fmode_t that is passed to dm_blk_ioctl() rather than
inconsistently (varies across targets) drop it on the floor by
overriding it with the fmode_t stored in 'struct dm_dev'.

All the persistent reservation functions weren't using the fmode_t they
got back from .prepare_ioctl so remove them.

Signed-off-by: Mike Snitzer

dm: allow targets to return output from messages they are sent

2018-04-03T19:04:10+00:00

Could be useful for a target to return stats or other information.
If a target does DMEMIT() anything to @result from its .message method
then it must return 1 to the caller.

Signed-off-By: Mike Snitzer

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:01:08+00:00

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland 
Signed-off-by: Paul E. McKenney 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar

Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2017-09-14T20:43:16+00:00

Pull device mapper updates from Mike Snitzer:

 - Some request-based DM core and DM multipath fixes and cleanups

 - Constify a few variables in DM core and DM integrity

 - Add bufio optimization and checksum failure accounting to DM
   integrity

 - Fix DM integrity to avoid checking integrity of failed reads

 - Fix DM integrity to use init_completion

 - A couple DM log-writes target fixes

 - Simplify DAX flushing by eliminating the unnecessary flush
   abstraction that was stood up for DM's use.

* tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dax: remove the pmem_dax_ops->flush abstraction
  dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK
  dm integrity: make blk_integrity_profile structure const
  dm integrity: do not check integrity for failed read operations
  dm log writes: fix >512b sectorsize support
  dm log writes: don't use all the cpu while waiting to log blocks
  dm ioctl: constify ioctl lookup table
  dm: constify argument arrays
  dm integrity: count and display checksum failures
  dm integrity: optimize writing dm-bufio buffers that are partially changed
  dm rq: do not update rq partially in each ending bio
  dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior
  dm mpath: complain about unsupported __multipath_map_bio() return values
  dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through

dm: constify argument arrays

2017-08-28T15:47:18+00:00

The arrays of 'struct dm_arg' are never modified by the device-mapper
core, so constify them so that they are placed in .rodata.

(Exception: the args array in dm-raid cannot be constified because it is
allocated on the stack and modified.)

Signed-off-by: Eric Biggers 
Signed-off-by: Mike Snitzer

block: replace bi_bdev with a gendisk pointer and partitions index

2017-08-23T18:49:55+00:00

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

dm switch: simplify conditional in alloc_region_table()

2015-10-31T23:06:06+00:00

The variable sctx->nr_regions has type unsigned long and the variable
nr_regions has type sector_t.

Thus the variables may be different when overflow happens.
Changed the conditional to "if (nr_regions >= ULONG_MAX)".
Also move the assignment of nr_regions after sector_div()
and the sanity check which looks more sane.

Signed-off-by: Tomohiro Kusumi 
Reviewed-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer

dm: refactor ioctl handling

2015-10-31T23:05:59+00:00

This moves the call to blkdev_ioctl and the argument checking to DM core
code, and only leaves a callout to find the block device to operate on
in the targets.  This simplifies the code and allows us to pass through
ioctl-like command using other methods in the next patch.

Also split out a helper around calling the prepare_ioctl method that
will be reused for persistent reservation handling.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Mike Snitzer

dm switch: efficiently support repetitive patterns

2014-08-01T16:30:37+00:00

Add support for quickly loading a repetitive pattern into the
dm-switch target.

In the "set_regions_mappings" message, the user may now use "Rn,m" as
one of the arguments.  "n" and "m" are hexadecimal numbers.  The "Rn,m"
argument repeats the last "n" arguments in the following "m" slots.

For example:
dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10
is equivalent to
dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \
:1 :2 :1 :2 :1 :2 :1 :2 :1 :2

Requested-by: Jay Wang 
Tested-by: Jay Wang 
Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer

dm switch: factor out switch_region_table_read

2014-08-01T16:30:36+00:00

Move code that reads the table to a switch_region_table_read.
It will be needed for the next commit.  No functional change.

Tested-by: Jay Wang 
Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer