linux-toradex.git/drivers/md/md.c, branch v3.14.35

md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN

2014-11-21T17:23:04+00:00

commit 45eaf45dfa4850df16bc2e8e7903d89021137f40 upstream.

md_check_recovery will skip any recovery and also clear
MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set.
So when we clear _FROZEN, we must set _NEEDED and ensure that
md_check_recovery gets run.
Otherwise we could miss out on something that is needed.

In particular, this can make it impossible to remove a
failed device from an array is the  'recovery-needed' processing
didn't happen.
Suitable for stable kernels since 3.13.

Reported-and-tested-by: Joe Lawrence 
Fixes: 30b8feb730f9b9b3c5de02580897da03f59b6b16
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: flush writes before starting a recovery.

2014-07-09T18:18:28+00:00

commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream.

When we write to a degraded array which has a bitmap, we
make sure the relevant bit in the bitmap remains set when
the write completes (so a 're-add' can quickly rebuilt a
temporarily-missing device).

If, immediately after such a write starts, we incorporate a spare,
commence recovery, and skip over the region where the write is
happening (because the 'needs recovery' flag isn't set yet),
then that write will not get to the new device.

Once the recovery finishes the new device will be trusted, but will
have incorrect data, leading to possible corruption.

We cannot set the 'needs recovery' flag when we start the write as we
do not know easily if the write will be "degraded" or not.  That
depends on details of the particular raid level and particular write
request.

This patch fixes a corruption issue of long standing and so it
suitable for any -stable kernel.  It applied correctly to 3.0 at
least and will minor editing to earlier kernels.

Reported-by: Bill 
Tested-by: Bill 
Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: always set MD_RECOVERY_INTR when interrupting a reshape thread.

2014-06-11T18:54:11+00:00

commit 2ac295a544dcae9299cba13ce250419117ae7fd1 upstream.

Commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
   md: fix problem when adding device to read-only array with bitmap.

added a called to md_reap_sync_thread() which cause a reshape thread
to be interrupted (in particular, it could cause md_thread() to never even
call md_do_sync()).
However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not
know that the reshape didn't complete.

This only happens when mddev->ro is set and normally reshape threads
don't run in that situation.  But raid5 and raid10 can start a reshape
thread during "run" is the array is in the middle of a reshape.
They do this even if ->ro is set.

So it is best to set MD_RECOVERY_INTR before abortingg the
sync thread, just in case.

Though it rare for this to trigger a problem it can cause data corruption
because the reshape isn't finished properly.
So it is suitable for any stable which the offending commit was applied to.
(3.2 or later)

Fixes: 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".

2014-06-11T18:54:11+00:00

commit 3991b31ea072b070081ca3bfa860a077eda67de5 upstream.

If mddev->ro is set, md_to_sync will (correctly) abort.
However in that case MD_RECOVERY_INTR isn't set.

If a RESHAPE had been requested, then ->finish_reshape() will be
called and it will think the reshape was successful even though
nothing happened.

Normally a resync will not be requested if ->ro is set, but if an
array is stopped while a reshape is on-going, then when the array is
started, the reshape will be restarted.  If the array is also set
read-only at this point, the reshape will instantly appear to success,
resulting in data corruption.

Consequently, this patch is suitable for any -stable kernel.

Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: avoid possible spinning md thread at shutdown.

2014-06-07T17:28:12+00:00

commit 0f62fb220aa4ebabe8547d3a9ce4a16d3c045f21 upstream.

If an md array with externally managed metadata (e.g. DDF or IMSM)
is in use, then we should not set safemode==2 at shutdown because:

1/ this is ineffective: user-space need to be involved in any 'safemode' handling,
2/ The safemode management code doesn't cope with safemode==2 on external metadata
   and md_check_recover enters an infinite loop.

Even at shutdown, an infinite-looping process can be problematic, so this
could cause shutdown to hang.

Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block

2014-01-30T19:19:05+00:00

Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...

Merge tag 'md/3.14' of git://neil.brown.name/md

2014-01-25T01:41:50+00:00

Pull md updates from Neil Brown:
 "All bug fixes, two tagged for -stable"

* tag 'md/3.14' of git://neil.brown.name/md:
  md/raid5: close recently introduced race in stripe_head management.
  md/raid5: fix long-standing problem with bitmap handling on write failure.
  md: check command validity early in md_ioctl().
  md: ensure metadata is writen after raid level change.
  md/raid10: avoid fullsync when not necessary.
  md: allow a partially recovered device to be hot-added to an array.
  md: Change handling of save_raid_disk and metadata update during recovery.

md: check command validity early in md_ioctl().

2014-01-15T21:55:00+00:00

Verify that the cmd parameter passed to md_ioctl() is valid before
doing anything.

This fixes mddev->hold_active being set to 0 when an invalid ioctl
command is passed to md_ioctl() before the array has been configured.

Clearing mddev->hold_active in that case can lead to a livelock
situation when an invalid ioctl number is given to md_ioctl() by a
process when the mddev is currently being opened by another process:

Process 1				Process 2
---------				---------

md_alloc()
  mddev_find()
  -> returns a new mddev with
     hold_active == UNTIL_IOCTL
  add_disk()
  -> sends KOBJ_ADD uevent

					(sees KOBJ_ADD uevent for device)
                    			md_open()
                    			md_ioctl(INVALID_IOCTL)
                    			-> returns ENODEV and clears
                       			   mddev->hold_active
                    			md_release()
                      			md_put()
                      			-> deletes the mddev as
                         		   hold_active is 0

md_open()
  mddev_find()
  -> returns a newly
    allocated mddev with
    mddev->gendisk == NULL
-> returns with ERESTARTSYS
   (kernel restarts the open syscall)

Signed-off-by: Nicolas Schichan 
Signed-off-by: NeilBrown

Merge tag 'md/3.13-fixes' of git://neil.brown.name/md

2014-01-15T08:07:36+00:00

Pull late md fixes from Neil Brown:
 "Half a dozen md bug fixes.

  All of these fix real bugs the people have hit, and are tagged for
  -stable.  Sorry they are late ....  Christmas holidays and all that.
  Hopefully they can still squeak into 3.13"

* tag 'md/3.13-fixes' of git://neil.brown.name/md:
  md: fix problem when adding device to read-only array with bitmap.
  md/raid10: fix bug when raid10 recovery fails to recover a block.
  md/raid5: fix a recently broken BUG_ON().
  md/raid1: fix request counting bug in new 'barrier' code.
  md/raid10: fix two bugs in handling of known-bad-blocks.
  md/raid5: Fix possible confusion when multiple write errors occur.

md: ensure metadata is writen after raid level change.

2014-01-14T05:44:21+00:00

level_store() currently does not make sure the metadata is
updates to reflect the new raid level.  It simply sets MD_CHANGE_DEVS.

Any level with a ->thread will quickly notice this and update the
metadata.  However RAID0 and Linear do not have a thread so no
metadata update happens until the array is stopped.  At that point the
metadata is written.

This is later that we would like.  While the delay doesn't risk any
data it can cause confusion.  So if there is no md thread, immediately
update the metadata after a level change.

Reported-by: Richard Michael 
Signed-off-by: NeilBrown