linux-toradex.git/drivers/md/multipath.c, branch v2.6.31.4

md: Push down data integrity code to personalities.

2009-08-03T00:59:47+00:00

This patch replaces md_integrity_check() by two new public functions:
md_integrity_register() and md_integrity_add_rdev() which are both
personality-independent.

md_integrity_register() is called from the ->run and ->hot_remove
methods of all personalities that support data integrity.  The
function iterates over the component devices of the array and
determines if all active devices are integrity capable and if their
profiles match. If this is the case, the common profile is registered
for the mddev via blk_integrity_register().

The second new function, md_integrity_add_rdev() is called from the
->hot_add_disk methods, i.e. whenever a new device is being added
to a raid array. If the new device does not support data integrity,
or has a profile different from the one already registered, data
integrity for the mddev is disabled.

For raid0 and linear, only the call to md_integrity_register() from
the ->run method is necessary.

Signed-off-by: Andre Noll 
Signed-off-by: NeilBrown

md: Use new topology calls to indicate alignment and I/O sizes

2009-07-01T01:13:45+00:00

Switch MD over to the new disk_stack_limits() function which checks for
aligment and adjusts preferred I/O sizes when stacking.

Also indicate preferred I/O sizes where applicable.

Signed-off-by: Martin K. Petersen 
Signed-off-by: Mike Snitzer 
Signed-off-by: NeilBrown

md: Move check for bitmap presence to personality code.

2009-06-17T22:49:23+00:00

If the superblock of a component device indicates the presence of a
bitmap but the corresponding raid personality does not support bitmaps
(raid0, linear, multipath, faulty), then something is seriously wrong
and we'd better refuse to run such an array.

Currently, this check is performed while the superblocks are examined,
i.e. before entering personality code. Therefore the generic md layer
must know which raid levels support bitmaps and which do not.

This patch avoids this layer violation without adding identical code
to various personalities. This is accomplished by introducing a new
public function to md.c, md_check_no_bitmap(), which replaces the
hard-coded checks in the superblock loading functions.

A call to md_check_no_bitmap() is added to the ->run method of each
personality which does not support bitmaps and assembly is aborted
if at least one component device contains a bitmap.

Signed-off-by: Andre Noll 
Signed-off-by: NeilBrown

md: remove mddev_to_conf "helper" macro

2009-06-16T06:54:21+00:00

Having a macro just to cast a void* isn't really helpful.
I would must rather see that we are simply de-referencing ->private,
than have to know what the macro does.

So open code the macro everywhere and remove the pointless cast.

Signed-off-by: NeilBrown

block: Use accessor functions for queue limits

2009-05-22T21:22:54+00:00

Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

md: centralize ->array_sectors modifications

2009-03-31T03:59:03+00:00

Get personalities out of the business of directly modifying
->array_sectors.  Lays groundwork to introduce policy on when
->array_sectors can be modified.

Reviewed-by: Andre Noll 
Signed-off-by: Dan Williams

md: add 'size' as a personality method

2009-03-31T03:57:49+00:00

In preparation for giving userspace control over ->array_sectors we need
to be able to retrieve the 'default' size, and the 'anticipated' size
when a reshape is requested.  For personalities that do not reshape emit
a warning if anything but the default size is requested.

In the raid5 case we need to update ->previous_raid_disks to make the
new 'default' size available.

Reviewed-by: Andre Noll 
Signed-off-by: Dan Williams

md: Make mddev->size sector-based.

2009-03-31T03:33:13+00:00

This patch renames the "size" field of struct mddev_s to "dev_sectors"
and stores the number of 512-byte sectors instead of the number of
1K-blocks in it.

All users of that field, including raid levels 1,4-6,10, are adjusted
accordingly. This simplifies the code a bit because it allows to get
rid of a couple of divisions/multiplications by two.

In order to make checkpatch happy, some minor coding style issues
have also been addressed. In particular, size_store() now uses
strict_strtoull() instead of simple_strtoull().

Signed-off-by: Andre Noll 
Signed-off-by: NeilBrown

md: move md_k.h from include/linux/raid/ to drivers/md/

2009-03-31T03:33:13+00:00

It really is nicer to keep related code together..

Signed-off-by: NeilBrown

md: move lots of #include lines out of .h files and into .c

2009-03-31T03:33:13+00:00

This makes the includes more explicit, and is preparation for moving
md_k.h to drivers/md/md.h

Remove include/raid/md.h as its only remaining use was to #include
other files.

Signed-off-by: NeilBrown