linux-toradex.git/drivers/md/raid0.c, branch v5.10-rc2

md/raid0: remove unused function is_io_in_chunk_boundary()

2020-10-09T05:31:29+00:00

This function is no longger needed after commit 20d0189b1012 ("block:
Introduce new bio_split()").

Signed-off-by: Jason Yan 
Signed-off-by: Song Liu

md: add md_submit_discard_bio() for submitting discard bio

2020-09-24T23:44:45+00:00

Move these logic from raid0.c to md.c, so that we can also use it in
raid10.c.

Reviewed-by: Coly Li 
Reviewed-by: Guoqing Jiang 
Signed-off-by: Xiao Ni 
Signed-off-by: Song Liu

block: lift setting the readahead size into the block layer

2020-09-24T19:43:39+00:00

Drivers shouldn't really mess with the readahead size, as that is a VM
concept.  Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk.  Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors.  To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Jan Kara 
Reviewed-by: Mike Snitzer 
Reviewed-by: Martin K. Petersen 
Acked-by: Coly Li 
Signed-off-by: Jens Axboe

writeback: remove bdi->congested_fn

2020-07-08T23:20:46+00:00

Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig 
Acked-by: Song Liu 
Acked-by: David Sterba 
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe

block: rename generic_make_request to submit_bio_noacct

2020-07-01T13:27:24+00:00

generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: fix an integer overflow in logical block size

2020-01-16T04:43:09+00:00

Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.

For exmaple (run this on an architecture with 64k pages):

Mount will fail with this error because it tries to read the superblock using 2-sector
access:
  device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
  EXT4-fs (dm-0): unable to read superblock

This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.

Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen 
Reviewed-by: Ming Lei 
Signed-off-by: Mikulas Patocka 
Signed-off-by: Jens Axboe

Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block

2019-11-25T19:15:41+00:00

Pull block driver updates from Jens Axboe:
 "Here are the main block driver updates for 5.5. Nothing major in here,
  mostly just fixes. This contains:

   - a set of bcache changes via Coly

   - MD changes from Song

   - loop unmap write-zeroes fix (Darrick)

   - spelling fixes (Geert)

   - zoned additions cleanups to null_blk/dm (Ajay)

   - allow null_blk online submit queue changes (Bart)

   - NVMe changes via Keith, nothing major here either"

* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
  Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
  drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  bcache: don't export symbols
  bcache: remove the extra cflags for request.o
  bcache: at least try to shrink 1 node in bch_mca_scan()
  bcache: add idle_max_writeback_rate sysfs interface
  bcache: add code comments in bch_btree_leaf_dirty()
  bcache: fix deadlock in bcache_allocator
  bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
  bcache: deleted code comments for dead code in bch_data_insert_keys()
  bcache: add more accurate error messages in read_super()
  bcache: fix static checker warning in bcache_device_free()
  bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
  bcache: fix fifo index swapping condition in journal_pin_cmp()
  md/raid10: prevent access of uninitialized resync_pages offset
  md: avoid invalid memory access for array sb->dev_roles
  md/raid1: avoid soft lockup under high load
  null_blk: add zone open, close, and finish support
  dm: add zone open, close and finish support
  ...

md: improve handling of bio with REQ_PREFLUSH in md_flush_request()

2019-10-24T22:22:40+00:00

If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.

Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function.  If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.

Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.

Fixes: 2bc13b83e629 ("md: batch flush requests.")
Cc: stable@vger.kernel.org # # v4.19+
Cc: NeilBrown 
Signed-off-by: David Jeffery 
Reviewed-by: Xiao Ni 
Signed-off-by: Song Liu

md/raid0: Fix an error message in raid0_make_request()

2019-10-24T22:22:40+00:00

The first argument to WARN() is supposed to be a condition.  The
original code will just print the mdname() instead of the full warning
message.

Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Signed-off-by: Dan Carpenter 
Signed-off-by: Song Liu

md/raid0: fix warning message for parameter default_layout

2019-10-16T16:43:02+00:00

The message should match the parameter, i.e. raid0.default_layout.

Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown 
Reported-by: Ivan Topolsky 
Signed-off-by: Song Liu