linux-toradex.git/drivers/md/raid10.c, branch v3.2.46

md/raid10: use correct limit variable

2012-10-30T23:26:43+00:00

commit 91502f099dfc5a1e8812898e26ee280713e1d002 upstream.

Clang complains that we are assigning a variable to itself.  This should
be using bad_sectors like the similar earlier check does.

Bug has been present since 3.1-rc1.  It is minor but could
conceivably cause corruption or other bad behaviour.

Signed-off-by: Dan Carpenter 
Signed-off-by: NeilBrown 
Signed-off-by: Ben Hutchings

md/raid10: fix "enough" function for detecting if array is failed.

2012-10-10T02:31:06+00:00

commit 80b4812407c6b1f66a4f2430e69747a13f010839 upstream.

The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.

So change it to make this number explicit.

This bug makes it possible to run arrays without enough drives
present, which is dangerous.
It is appropriate for an -stable kernel, but will almost certainly
need to be modified for some of them.

Reported-by: Jakub Husák 
Signed-off-by: NeilBrown 
[bwh: Backported to 3.2: s/geo->/conf->/]
Signed-off-by: Ben Hutchings

md/raid10: fix failure when trying to repair a read error.

2012-07-12T03:32:06+00:00

commit 055d3747dbf00ce85c6872ecca4d466638e80c22 upstream.

commit 58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf
     md/raid10: handle further errors during fix_read_error better.

in 3.1 added "r10_sync_page_io" which takes an IO size in sectors.
But we were passing the IO size in bytes!!!
This resulting in bio_add_page failing, and empty request being sent
down, and a consequent BUG_ON in scsi_lib.

[fix missing space in error message at same time]

This fix is suitable for 3.1.y and later.

Reported-by: Christian Balzer 
Signed-off-by: NeilBrown 
Signed-off-by: Ben Hutchings

md/raid10: Don't try to recovery unmatched (and unused) chunks.

2012-07-12T03:32:05+00:00

commit fc448a18ae6219af9a73257b1fbcd009efab4a81 upstream.

If a RAID10 has an odd number of chunks - as might happen when there
are an odd number of devices - the last chunk has no pair and so is
not mirrored.  We don't store data there, but when recovering the last
device in an array we retry to recover that last chunk from a
non-existent location.  This results in an error, and the recovery
aborts.

When we get to that last chunk we should just stop - there is nothing
more to do anyway.

This bug has been present since the introduction of RAID10, so the
patch is appropriate for any -stable kernel.

Reported-by: Christian Balzer 
Tested-by: Christian Balzer 
Signed-off-by: NeilBrown 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

md/raid1,raid10: avoid deadlock during resync/recovery.

2012-04-02T16:52:46+00:00

commit d6b42dcb995e6acd7cc276774e751ffc9f0ef4bf upstream.

If RAID1 or RAID10 is used under LVM or some other stacking
block device, it is possible to enter a deadlock during
resync or recovery.
This can happen if the upper level block device creates
two requests to the RAID1 or RAID10.  The first request gets
processed, blocks recovery and queue requests for underlying
requests in current->bio_list.  A resync request then starts
which will wait for those requests and block new IO.

But then the second request to the RAID1/10 will be attempted
and it cannot progress until the resync request completes,
which cannot progress until the underlying device requests complete,
which are on a queue behind that second request.

So allow that second request to proceed even though there is
a resync request about to start.

This is suitable for any -stable kernel.

Reported-by: Ray Morris 
Tested-by: Ray Morris 
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47+00:00

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include 
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include 
  net: sch_generic remove redundant use of 
  net: inet_timewait_sock doesnt need 
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h

Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block

2011-11-05T00:06:58+00:00

* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c

md: Add module.h to all files using it implicitly

2011-10-31T23:31:18+00:00

A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in md dir
are actually calling out for  explicitly in advance.

Signed-off-by: Paul Gortmaker

md/raid10: Fix bug when activating a hot-spare.

2011-10-31T01:59:44+00:00

This is a fairly serious bug in RAID10.

When a RAID10 array is degraded and a hot-spare is activated, the
spare does not take up the empty slot, but rather replaces the first
working device.
This is likely to make the array non-functional.   It would normally
be possible to recover the data, but that would need care and is not
guaranteed.

This bug was introduced in commit
   2bb77736ae5dca0a189829fbb7379d43364a9dac
which first appeared in 3.1.

Cc: stable@kernel.org
Signed-off-by: NeilBrown

md: Fix some bugs in recovery_disabled handling.

2011-10-26T00:54:39+00:00

In 3.0 we changed the way recovery_disabled was handle so that instead
of testing against zero, we test an mddev-> value against a conf->
value.
Two problems:
  1/ one place in raid1 was missed and still sets to '1'.
  2/ We didn't explicitly set the conf-> value at array creation
     time.
     It defaulted to '0' just like the mddev value does so they
     could appear equal and thus disable recovery.
     This did not affect normal 'md' as it calls bind_rdev_to_array
     which changes the mddev value.  However the dmraid interface
     doesn't call this and so doesn't change ->recovery_disabled; so at
     array start all recovery is incorrectly disabled.

So initialise the 'conf' value to one less that the mddev value, so
the will only be the same when explicitly set that way.

Reported-by: Jonathan Brassow 
Signed-off-by: NeilBrown