linux-toradex.git/drivers/md/raid10.h, branch v4.4.93

md/raid10: ensure device failure recorded before write request returns.

2015-08-31T17:43:45+00:00

When a write to one of the legs of a RAID10 fails, the failure is
recorded in the metadata of the other legs so that after a restart
the data on the failed drive wont be trusted even if that drive seems
to be working again (maybe a cable was unplugged).

Currently there is no interlock between the write request completing
and the metadata update.  So it is possible that the write will
complete, the app will confirm success in some way, and then the
machine will crash before the metadata update completes.

This is an extremely small hole for a racy to fit in, but it is
theoretically possible and so should be closed.

So:
 - set MD_CHANGE_PENDING when requesting a metadata update for a
   failed device, so we can know with certainty when it completes
 - queue requests that experienced an error on a new queue which
   is only processed after the metadata update completes
 - call raid_end_bio_io() on bios in that queue when the time comes.

Signed-off-by: NeilBrown

md: make ->congested robust against personality changes.

2015-02-03T21:35:52+00:00

There is currently no locking around calls to the 'congested'
bdi function.  If called at an awkward time while an array is
being converted from one level (or personality) to another, there
is a tiny chance of running code in an unreferenced module etc.

So add a 'congested' function to the md_personality operations
structure, and call it with appropriate locking from a central
'mddev_congested'.

When the array personality is changing the array will be 'suspended'
so no IO is processed.
If mddev_congested detects this, it simply reports that the
array is congested, which is a safe guess.
As mddev_suspend calls synchronize_rcu(), mddev_congested can
avoid races by included the whole call inside an rcu_read_lock()
region.
This require that the congested functions for all subordinate devices
can be run under rcu_lock.  Fortunately this is the case.

Signed-off-by: NeilBrown

MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)

2013-02-26T00:55:30+00:00

The MD RAID10 'far' and 'offset' algorithms make copies of entire stripe
widths - copying them to a different location on the same devices after
shifting the stripe.  An example layout of each follows below:

	        "far" algorithm
	dev1 dev2 dev3 dev4 dev5 dev6
	==== ==== ==== ==== ==== ====
	 A    B    C    D    E    F
	 G    H    I    J    K    L
	            ...
	 F    A    B    C    D    E  --> Copy of stripe0, but shifted by 1
	 L    G    H    I    J    K
	            ...

		"offset" algorithm
	dev1 dev2 dev3 dev4 dev5 dev6
	==== ==== ==== ==== ==== ====
	 A    B    C    D    E    F
	 F    A    B    C    D    E  --> Copy of stripe0, but shifted by 1
	 G    H    I    J    K    L
	 L    G    H    I    J    K
	            ...

Redundancy for these algorithms is gained by shifting the copied stripes
one device to the right.  This patch proposes that array be divided into
sets of adjacent devices and when the stripe copies are shifted, they wrap
on set boundaries rather than the array size boundary.  That is, for the
purposes of shifting, the copies are confined to their sets within the
array.  The sets are 'near_copies * far_copies' in size.

The above "far" algorithm example would change to:
	        "far" algorithm
	dev1 dev2 dev3 dev4 dev5 dev6
	==== ==== ==== ==== ==== ====
	 A    B    C    D    E    F
	 G    H    I    J    K    L
	            ...
	 B    A    D    C    F    E  --> Copy of stripe0, shifted 1, 2-dev sets
	 H    G    J    I    L    K      Dev sets are 1-2, 3-4, 5-6
	            ...

This has the affect of improving the redundancy of the array.  We can
always sustain at least one failure, but sometimes more than one can
be handled.  In the first examples, the pairs of devices that CANNOT fail
together are:
	(1,2) (2,3) (3,4) (4,5) (5,6) (1, 6) [40% of possible pairs]
In the example where the copies are confined to sets, the pairs of
devices that cannot fail together are:
	(1,2) (3,4) (5,6)                    [20% of possible pairs]

We cannot simply replace the old algorithms, so the 17th bit of the 'layout'
variable is used to indicate whether we use the old or new method of computing
the shift.  (This is similar to the way the 16th bit indicates whether the
"far" algorithm or the "offset" algorithm is being used.)

This patch only handles the cases where the number of total raid disks is
a multiple of 'far_copies'.  A follow-on patch addresses the condition where
this is not true.

Signed-off-by: Jonathan Brassow 
Signed-off-by: NeilBrown

md/raid10: fix problem with on-stack allocation of r10bio structure.

2012-08-17T23:51:42+00:00

A 'struct r10bio' has an array of per-copy information at the end.
This array is declared with size [0] and r10bio_pool_alloc allocates
enough extra space to store the per-copy information depending on the
number of copies needed.

So declaring a 'struct r10bio on the stack isn't going to work.  It
won't allocate enough space, and memory corruption will ensue.

So in the two places where this is done, declare a sufficiently large
structure and use that instead.

The two call-sites of this bug were introduced in 3.4 and 3.5
so this is suitable for both those kernels.  The patch will have to
be modified for 3.4 as it only has one bug.

Cc: stable@vger.kernel.org
Reported-by: Ivan Vasilyev 
Tested-by: Ivan Vasilyev 
Signed-off-by: NeilBrown

MD RAID10: Export md_raid10_congested

2012-07-31T00:03:53+00:00

md/raid10: Export is_congested test.

In similar fashion to commits
	11d8a6e3719519fbc0e2c9d61b6fa931b84bf813
	1ed7242e591af7e233234d483f12d33818b189d9
we export the RAID10 congestion checking function so that dm-raid.c can
make use of it and make use of the personality.  The 'queue' and 'gendisk'
structures will not be available to the MD code when device-mapper sets
up the device, so we conditionalize access to these fields also.

Signed-off-by: Jonathan Brassow 
Signed-off-by: NeilBrown

MD: Move macros from raid1.h to raid1.c

2012-07-31T00:03:52+00:00

MD RAID1/RAID10: Move some macros from .h file to .c file

There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined
in both raid1.h and raid10.h.  They are only used in there respective .c files.
However, if we wish to make RAID10 accessible to the device-mapper RAID
target (dm-raid.c), then we need to move these macros into the .c files where
they are used so that they do not conflict with each other.

The macros from the two files are identical and could be moved into md.h, but
I chose to leave the duplication and have them remain in the personality
files.

Signed-off-by: Jonathan Brassow 
Signed-off-by: NeilBrown

MD RAID10: rename mirror_info structure

2012-07-31T00:03:52+00:00

MD RAID10: Rename the structure 'mirror_info' to 'raid10_info'

The same structure name ('mirror_info') is used by raid1.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.

Signed-off-by: Jonathan Brassow 
Signed-off-by: NeilBrown

md/raid10: add reshape support

2012-05-22T03:53:47+00:00

A 'near' or 'offset' lay RAID10 array can be reshaped to a different
'near' or 'offset' layout, a different chunk size, and a different
number of devices.
However the number of copies cannot change.

Unlike RAID5/6, we do not support having user-space backup data that
is being relocated during a 'critical section'.  Rather, the
data_offset of each device must change so that when writing any block
to a new location, it will not over-write any data that is still
'live'.

This means that RAID10 reshape is not supportable on v0.90 metadata.

The different between the old data_offset and the new_offset must be
at least the larger of the chunksize multiplied by offset copies of
each of the old and new layout. (for 'near' mode, offset_copies == 1).

A larger difference of around 64M seems useful for in-place reshapes
as more data can be moved between metadata updates.
Very large differences (e.g. 512M) seem to slow the process down due
to lots of long seeks (on oldish consumer graded devices at least).

Metadata needs to be updated whenever the place we are about to write
to is considered - by the current metadata - to still contain data in
the old layout.

[unbalanced locking fix from Dan Carpenter ]

Signed-off-by: NeilBrown

md/raid10: Introduce 'prev' geometry to support reshape.

2012-05-20T23:28:33+00:00

When RAID10 supports reshape it will need a 'previous' and a 'current'
geometry, so introduce that here.
Use the 'prev' geometry when before the reshape_position, and the
current 'geo' when beyond it.  At other times, use both as
appropriate.

For now, both are identical (And reshape_position is never set).

When we use the 'prev' geometry, we must use the old data_offset.
When we use the current (And a reshape is happening) we must use
the new_data_offset.

Signed-off-by: NeilBrown

md/raid10: collect some geometry fields into a dedicated structure.

2012-05-20T23:28:20+00:00

We will shortly be adding reshape support for RAID10 which will
require it having 2 concurrent geometries (before and after).
To make that easier, collect most geometry fields into 'struct geom'
and access them from there.  Then we will more easily be able to add
a second set of fields.

Note that 'copies' is not in this struct and so cannot be changed.
There is little need to change this number and doing so is a lot
more difficult as it requires reallocating more things.
So leave it out for now.

Signed-off-by: NeilBrown