linux-toradex.git/drivers/md, branch v3.14.35

md/raid1: fix read balance when a drive is write-mostly.

2015-03-06T22:43:31+00:00

commit d1901ef099c38afd11add4cfb3312c02ef21ec4a upstream.

When a drive is marked write-mostly it should only be the
target of reads if there is no other option.

This behaviour was broken by

commit 9dedf60313fa4dddfd5b9b226a0ef12a512bf9dc
    md/raid1: read balance chooses idlest disk for SSD

which causes a write-mostly device to be *preferred* is some cases.

Restore correct behaviour by checking and setting
best_dist_disk and best_pending_disk rather than best_disk.

We only need to test one of these as they are both changed
from -1 or >=0 at the same time.

As we leave min_pending and best_dist unchanged, any non-write-mostly
device will appear better than the write-mostly device.

Reported-by: Tomáš Hodek 
Reported-by: Dark Penguin 
Signed-off-by: NeilBrown 
Link: http://marc.info/?l=linux-raid&m=135982797322422
Fixes: 9dedf60313fa4dddfd5b9b226a0ef12a512bf9dc
Signed-off-by: Greg Kroah-Hartman

md/raid5: Fix livelock when array is both resyncing and degraded.

2015-03-06T22:43:31+00:00

commit 26ac107378c4742978216be1005b7291b799c7b2 upstream.

Commit a7854487cd7128a30a7f4f5259de9f67d5efb95f:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.

Reported-by: Manibalan P 
Bisected-by: Jes Sorensen 
Tested-by: Jes Sorensen 
Signed-off-by: NeilBrown 
Fixes: a7854487cd7128a30a7f4f5259de9f67d5efb95f
Signed-off-by: Greg Kroah-Hartman

dm cache: fix missing ERR_PTR returns and handling

2015-02-06T06:35:50+00:00

commit 766a78882ddf79b162243649d7dfdbac1fb6fb88 upstream.

Commit 9b1cc9f251 ("dm cache: share cache-metadata object across
inactive and active DM tables") mistakenly ignored the use of ERR_PTR
returns.  Restore missing IS_ERR checks and ERR_PTR returns where
appropriate.

Reported-by: Dan Carpenter 
Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode

2015-02-06T06:35:50+00:00

commit 2a7eaea02b99b6e267b1e89c79acc6e9a51cee3b upstream.

You can't modify the metadata in these modes.  It's better to fail these
messages immediately than let the block-manager deny write locks on
metadata blocks.  Otherwise these failed metadata changes will trigger
'needs_check' to get set in the metadata superblock -- requiring repair
using the thin_check utility.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.

2015-01-30T01:40:53+00:00

commit 108cef3aa41669610e1836fe638812dd067d72de upstream.

It is critical that fetch_block() and handle_stripe_dirtying()
are consistent in their analysis of what needs to be loaded.
Otherwise raid5 can wait forever for a block that won't be loaded.

Currently when writing to a RAID5 that is resyncing, to a location
beyond the resync offset, handle_stripe_dirtying chooses a
reconstruct-write cycle, but fetch_block() assumes a
read-modify-write, and a lockup can happen.

So treat that case just like RAID6, just as we do in
handle_stripe_dirtying.  RAID6 always does reconstruct-write.

This bug was introduced when the behaviour of handle_stripe_dirtying
was changed in 3.7, so the patch is suitable for any kernel since,
though it will need careful merging for some versions.

Cc: stable@vger.kernel.org (v3.7+)
Fixes: a7854487cd7128a30a7f4f5259de9f67d5efb95f
Reported-by: Henry Cai 
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

dm cache: fix problematic dual use of a single migration count variable

2015-01-30T01:40:49+00:00

commit a59db67656021fa212e9b95a583f13c34eb67cd9 upstream.

Introduce a new variable to count the number of allocated migration
structures.  The existing variable cache->nr_migrations became
overloaded.  It was used to:

 i) track of the number of migrations in flight for the purposes of
    quiescing during suspend.

 ii) to estimate the amount of background IO occuring.

Recent discard changes meant that REQ_DISCARD bios are processed with
a migration.  Discards are not background IO so nr_migrations was not
incremented.  However this could cause quiescing to complete early.

(i) is now handled with a new variable cache->nr_allocated_migrations.
cache->nr_migrations has been renamed cache->nr_io_migrations.
cleanup_migration() is now called free_io_migration(), since it
decrements that variable.

Also, remove the unused cache->next_migration variable that got replaced
with with prealloc_structs a while ago.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm cache: share cache-metadata object across inactive and active DM tables

2015-01-30T01:40:49+00:00

commit 9b1cc9f251affdd27f29fe46d0989ba76c33faf6 upstream.

If a DM table is reloaded with an inactive table when the device is not
suspended (normal procedure for LVM2), then there will be two dm-bufio
objects that can diverge.  This can lead to a situation where the
inactive table uses bufio to read metadata at the same time the active
table writes metadata -- resulting in the inactive table having stale
metadata buffers once it is promoted to the active table slot.

Fix this by using reference counting and a global list of cache metadata
objects to ensure there is only one metadata object per metadata device.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

bcache: Make sure to pass GFP_WAIT to mempool_alloc()

2015-01-27T16:18:59+00:00

commit bcf090e0040e30f8409e6a535a01e6473afb096f upstream.

this was very wrong - mempool_alloc() only guarantees success with GFP_WAIT.
bcache uses GFP_NOWAIT in various other places where we have a fallback,
circuits must've gotten crossed when writing this code or something.

Signed-off-by: Kent Overstreet 
Cc: Gabriel de Perthuis 
Signed-off-by: Greg Kroah-Hartman

dm thin: fix missing out-of-data-space to write mode transition if blocks are released

2015-01-08T18:00:49+00:00

commit 2c43fd26e46734430122b8d2ad3024bb532df3ef upstream.

Discard bios and thin device deletion have the potential to release data
blocks.  If the thin-pool is in out-of-data-space mode, and blocks were
released, transition the thin-pool back to full write mode.

The correct time to do this is just after the thin-pool metadata commit.
It cannot be done before the commit because the space maps will not
allow immediate reuse of the data blocks in case there's a rollback
following power failure.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm thin: fix inability to discard blocks when in out-of-data-space mode

2015-01-08T18:00:48+00:00

commit 45ec9bd0fd7abf8705e7cf12205ff69fe9d51181 upstream.

When the pool was in PM_OUT_OF_SPACE mode its process_prepared_discard
function pointer was incorrectly being set to
process_prepared_discard_passdown rather than process_prepared_discard.

This incorrect function pointer meant the discard was being passed down,
but not effecting the mapping.  As such any discard that was issued, in
an attempt to reclaim blocks, would not successfully free data space.

Reported-by: Eric Sandeen 
Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman