linux-toradex.git/drivers/md, branch v4.4.29

dm crypt: fix crash on exit

2016-10-28T07:01:28+00:00

commit f659b10087daaf4ce0087c3f6aec16746be9628f upstream.

As the documentation for kthread_stop() says, "if threadfn() may call
do_exit() itself, the caller must ensure task_struct can't go away".
dm-crypt does not ensure this and therefore crashes when crypt_dtr()
calls kthread_stop().  The crash is trivially reproducible by adding a
delay before the call to kthread_stop() and just opening and closing a
dm-crypt device.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7
 task: ffff88003bd0df40 task.stack: ffff8800375b4000
 RIP: 0010: kthread_stop+0x52/0x300
 Call Trace:
  crypt_dtr+0x77/0x120
  dm_table_destroy+0x6f/0x120
  __dm_destroy+0x130/0x250
  dm_destroy+0x13/0x20
  dev_remove+0xe6/0x120
  ? dev_suspend+0x250/0x250
  ctl_ioctl+0x1fc/0x530
  ? __lock_acquire+0x24f/0x1b10
  dm_ctl_ioctl+0x13/0x20
  do_vfs_ioctl+0x91/0x6a0
  ? ____fput+0xe/0x10
  ? entry_SYSCALL_64_fastpath+0x5/0xbd
  ? trace_hardirqs_on_caller+0x151/0x1e0
  SyS_ioctl+0x41/0x70
  entry_SYSCALL_64_fastpath+0x1f/0xbd

This problem was introduced by bcbd94ff481e ("dm crypt: fix a possible
hang due to race condition on exit").

Looking at the description of that patch (excerpted below), it seems
like the problem it addresses can be solved by just using
set_current_state instead of __set_current_state, since we obviously
need the memory barrier.

| dm crypt: fix a possible hang due to race condition on exit
|
| A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE),
| __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop().
| It is possible that the processor reorders memory accesses so that
| kthread_should_stop() is executed before __set_current_state().  If
| such reordering happens, there is a possible race on thread
| termination: [...]

So this patch just reverts the aforementioned patch and changes the
__set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...).  This
fixes the crash and should also fix the potential hang.

Fixes: bcbd94ff481e ("dm crypt: fix a possible hang due to race condition on exit")
Cc: Mikulas Patocka 
Signed-off-by: Rabin Vincent 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm mpath: check if path's request_queue is dying in activate_path()

2016-10-28T07:01:28+00:00

commit f10e06b744074824fb8ec7066bc03ecc90918f5b upstream.

If pg_init_retries is set and a request is queued against a multipath
device with all underlying block device request_queues in the "dying"
state then an infinite loop is triggered because activate_path() never
succeeds and hence never calls pg_init_done().

This change avoids that device removal triggers an infinite loop by
failing the activate_path() which causes the "dying" path to be failed.

Reported-by: Bart Van Assche 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm: return correct error code in dm_resume()'s retry loop

2016-10-28T07:01:27+00:00

commit 8dc23658b7aaa8b6b0609c81c8ad75e98b612801 upstream.

dm_resume() will return success (0) rather than -EINVAL if
!dm_suspended_md() upon retry within dm_resume().

Reset the error code at the start of dm_resume()'s retry loop.
Also, remove a useless assignment at the end of dm_resume().

Fixes: ffcc393641 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Minfei Huang 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm: mark request_queue dead before destroying the DM device

2016-10-28T07:01:27+00:00

commit 3b785fbcf81c3533772c52b717f77293099498d3 upstream.

This avoids that new requests are queued while __dm_destroy() is in
progress.

Signed-off-by: Bart Van Assche 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm log writes: fix bug with too large bios

2016-10-07T13:23:47+00:00

commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 upstream.

bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries.  However, the incoming bio may have more vector entries if it
was allocated by other means.  For example, bcache submits bios with
more than BIO_MAX_PAGES entries.  This results in bio_alloc() failure.

To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries.  If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Josef Bacik 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

md-cluster: make md-cluster also can work when compiled into kernel

2016-09-24T08:07:41+00:00

commit 47a7b0d8888c04c9746812820b6e60553cc77bbc upstream.

The md-cluster is compiled as module by default,
if it is compiled by built-in way, then we can't
make md-cluster works.

[64782.630008] md/raid1:md127: active with 2 out of 2 mirrors
[64782.630528] md-cluster module not found.
[64782.630530] md127: Could not setup cluster service (-2)

Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions")
Reported-by: Marc Smith 
Reviewed-by: NeilBrown 
Signed-off-by: Guoqing Jiang 
Signed-off-by: Shaohua Li 
Signed-off-by: Greg Kroah-Hartman

dm crypt: fix error with too large bios

2016-09-24T08:07:41+00:00

commit 4e870e948fbabf62b78e8410f04c67703e7c816b upstream.

When dm-crypt processes writes, it allocates a new bio in
crypt_alloc_buffer().  The bio is allocated from a bio set and it can
have at most BIO_MAX_PAGES vector entries, however the incoming bio can be
larger (e.g. if it was allocated by bcache).  If the incoming bio is
larger, bio_alloc_bioset() fails and an error is returned.

To avoid the error, we test for a too large bio in the function
crypt_map() and use dm_accept_partial_bio() to split the bio.
dm_accept_partial_bio() trims the current bio to the desired size and
asks DM core to send another bio with the rest of the data.

Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm log writes: move IO accounting earlier to fix error path

2016-09-24T08:07:40+00:00

commit a5d60783df61fbb67b7596b8a0f6b4b2e05251d5 upstream.

Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to
fix a bug that the target hangs if bio_alloc() fails.  The error path
does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before
invoking the error path to avoid underflow of lc->io_blocks.

Signed-off-by: Mikulas Patocka 
Reviewed-by: Josef Bacik 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm log writes: fix check of kthread_run() return value

2016-09-24T08:07:40+00:00

commit 91e630d9ae6de6f740ef7c8176736eb55366833e upstream.

The kthread_run() function returns either a valid task_struct or
ERR_PTR() value, check for NULL is invalid.  This change fixes potential
for oops, e.g. in OOM situation.

Signed-off-by: Vladimir Zapolskiy 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm flakey: fix reads to be issued if drop_writes configured

2016-09-24T08:07:36+00:00

commit 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc upstream.

v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.

Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman